Galaxy Audio CTSR/85LV Wireless Lavalier Microphone System

Reinforce voices clearly with 920 selectable UHF frequencies. System includes Galaxy Audio's CTSR receiver, MBP85 bodypack transmitter, and LV-U3BK lav mic.

Overview

The CTS Series wireless systems feature 920 selectable UHF frequencies, IR Sync, Auto Scan, Squelch Adjustment, BNC detachable diversity antennas, LCD display and much, much more. CTS series also features 16 frequency groups with 14 channels per group; 2 groups can be user defined. This system includes the CTSR Receiver, the MBP85 Body Pack Transmitter, the LV-U3BK Lavalier Microphone, Antennas, 1/4" to 1/4" cable, Power Supply, Rack Ears, and Screws.

Features

- 300' Range
- Auto Scan
- True Diversity
- 920 Selectable UHF Frequencies
- Single/Dual Rack Mount Included

WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.

Specs

Available Frequencies: 920
Frequency Ranges:
CODE D 584 - 607 MHz
CODE J 514 - 537 MHz
Transmitter Output: 5 mW, 10 mW, 20 mW
Band: UHF
Operating Range: Under Typical Conditions 300' (92 m), actual range depends on RF signal absorption, reflection, and interference.
Audio Frequency Response: (+/-3 dB) 60 Hz - 16 Hz
Total Harmonic Distortion: (+/-30 kHz deviation, 1 kHz tone): <1%
Dynamic Range: >90 dB A-weighted
Operating Temperature Range: 14 degrees F to 122 degrees F, battery characteristics may limit this range
Audio Output Level (+/-30kHz deviation 1kHz tone): XLR Connector (into 600 Ohms load) 6 dBV
1/4" Connector (into 3 k Ohms load): 0 dBV
Output Connection: 1 Male XLR Balanced, 1/4" Unbalanced
Output Impedance: XLR Connector 200 Ohms
1/4" Connector: 1 k Ohms
XLR Output: Impedance Balanced
Pin 1: Ground (cable shield)
Pin 2: Audio +
Pin 3: No Audio -
Sensitivity: -102 dBm
Image Rejection: >90 dB
Casing: Metal Chassis EIA STANDARD 1/2 U
Dimensions: 1.7" x "8.3" x 6.3" (45 x 212 x 160 mm) (HxWxD)
Weight: 31.7 oz (900 g)
Power Requirements: 12 V DC at 500 mA, supplied by external power supply

MBP85 BODY PACK TRANSMITTER

Max Audio Input Level: -6 dBV (-3 gain)
Gain Adjust: -3 dB, 0 dB, +3 dB, +6 dB, +9 dB
RF Output: 5 mW, 10 mW, 20 mW
Input Impedance: 470 k Ohms
Dimensions: 3.85" x 2.51" x 0.90" (98 x 62 x 23 mm) (HxWxD)
Weight: 3.17 oz (90 g)
Power Requirements: 2 "AA" size alkaline or rechargeable batteries
Battery Life: About 12 hours (alkaline)

Dimensions and Weight in Packaging
Band D (584-607 MHz): Shipping Weight: 6 lbs; Shipping Dimensions: 17 x 13 x 4 in; Manufacturer Part Number (MPN): CTSR/85LVD
Band J (514-537 MHz): Shipping Weight: 5.25 lbs; Shipping Dimensions: 17 x 13 x 3 in; Manufacturer Part Number (MPN): CTSR/85LVJ

Consumer Alert

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones

NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.