Galaxy Audio PSER/52GTR Guitar/Bass Wireless System

Go wireless with Galaxy Audio. The PSER/52GTR wireless system includes the PSER receiver, MBP52 body-pack transmitter, instrument cable, and rackmount kit.

Overview

Part of the Galaxy Audio PSE wireless series, the PSER/52GTR wireless system includes the PSER receiver, the MBP52 body-pack transmitter, guitar/instrument cable, antennas, 1/4" to 1/4" cable, power supply, rack ears, and screws.

The PSER multi-channel microphone receiver features a volume control, channel display, Diversity Antennas and IR Sync. The PSE has an XLR 1/4" output and squelch adjustment. The PSER is a UHF diversity receiver with 16 selectable channels.

The PSER can be used and will sync with either the HH52 or MBP52 transmitters. The HH52 has a gain control and an on/off switch. Both transmitters are powered by 2 AA batteries. The MBP52 body pack transmitter has a 0/-10/Mic selector switch.

Features:

- 300' Range
- 16 Selectable UHF Frequencies
- Diversity Antennas
- Single/Dual Rack Mount Included
- Output Volume Control
- IR Sync Receiver to Transmitter
- AF Level Indicator
- Active Antenna Indicator
- Squelch Adjustment
- XLR / 1/4" Outputs
- Detachable BNC Antennas
- Metal Chassis

Specs

Available Frequencies: 16
Frequency Ranges:
CODE D 584~607MHz
CODE N 518~542MHz
Band: UHF
Operating Range Under Typical Conditions: 300' (92 m), actual range depends on RF signal absorption, reflection, and interference.
Audio Frequency Response: (+/-3 dB) 60 Hz ~ 16 kHz
Total Harmonic Distortion: (+/-30 kHz deviation 1 kHz tone): <1%
Dynamic Range: >90 dB A-weighted
Operating Temperature Range: 14 degrees F to 122 degrees F (-10 degrees C to 50 degrees C), battery characteristics may limit this range
Audio Output Level: (+/-30 kHz deviation, 1 kHz tone)
XLR Connector (into 600 Ohms load): -12 dBV
1/4" Connector (into 3 k Ohms load): -18 dBV
Output Connections: 1 Male XLR Balanced, 1/4" Balanced
Output Impedance: XLR connector 200 Ohms; 1/4" connector 1 k Ohms
XLR Output: Pin 1: Ground (cable shield), Pin 2: Audio +, Pin 3: No Audio -
Sensitivity: -93 dBm for 30 dB
Image Rejection: >90 dB
Casing: Metal Chassis EIA STANDARD 1 U
Dimensions: 1.7" x 8.3" x 6.3" (44 x 212 x 160 mm)
Weight: 31 oz (880 g)
Power Requirements: 12-18 V DC at 300 mA, supplied by external power supply

Dimensions and Weight in Packaging
Warehouse Resealed, Band D 584-607 MHz: Shipping Weight: 6 lbs; Shipping Dimensions: 17 x 13 x 3 in; Manufacturer Part Number (MPN): PSER/52GTRD

Consumer Alert

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones

NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.