EarthQuaker Devices Arrows V2 Preamp Booster Pedal
Give your distortion some kick or push your tube amp into supersaturation with the Arrows. Use the pedal with your neck pickup to increase overall clarity.
$109.00
- No Credit Check6 x$18.17
- No Credit Check4 x$27.25
EarthQuaker Devices Arrows Preamp Booster Pedal
No longer available at zZounds
Give your distortion some kick or push your tube amp into supersaturation with the Arrows. Use the pedal with your neck pickup to increase overall clarity.
Overview
The EarthQuaker Devices Arrows is an all-discrete tone sculpting preamp booster. It was designed with the intention of adding an additional channel of gain to all your dirt pedals as well as brightening up neck pickups. It boosts midrange, tightens up the low end and makes the top end shine while adding some push to drive your dirt into blooming sustain with excellent harmonics. Its simple interface is no-nonsense; a single control that will either boost or cut your signal. Use the Arrows to remove the muck from bass heavy fuzz pedals, push light overdrives into higher gains than you thought possible or even on its own to make your signal really pop with more pizazz. All analog, true bypass and handmade one at a time in the weird pit of Akron, Ohio.
- Level: Controls the volume.
Features
- Controls- Level: Controls the volume.
Specs
- Measures: 4.37" X 2.37" X 1.5" with knob
- Power: Our pedals take a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!
- Current draw: 2 mA.
- Power: Our pedals take a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!
- Current draw: 2 mA.
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 330-252-9220
Email: info@earthquakerdevices.com
Web: https://www.earthquakerdevices.com
Phone: 330-252-9220
Email: info@earthquakerdevices.com
Web: https://www.earthquakerdevices.com
No longer available at zZounds
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
Keeley Halo Andy Timmons Dual Echo Pedal
$299.00
- 8 x$37.38
- No Credit Check6 x$49.83
- No Credit Check4 x$74.75
Voodoo Lab Pedal Power 3 PLUS Power Supply
$279.99
- No Credit Check6 x$46.66
- No Credit Check4 x$70.00
Orange Super Crush 100 Solid-State Guitar Amplifier Head (100 Watts)
$499.00
- 8 x$62.38
- No Credit Check6 x$83.17
- No Credit Check4 x$124.75
MXR Carbon Copy Analog Delay Pedal (M169)
$149.99
- No Credit Check6 x$25.00
- No Credit Check4 x$37.50
PRS Paul Reed Smith SE Custom 24 Quilt Top Electric Guitar (with Gig Bag)
$999.00
- 18 x
- 12 x$83.25
- 8 x$124.88
- No Credit Check6 x$166.50
- No Credit Check4 x$249.75
Universal Audio Del-Verb Reverb and Delay Pedal
$349.00
- 8 x$43.63
- No Credit Check6 x$58.17
- No Credit Check4 x$87.25
