Epiphone G-400 Exclusive Deluxe PRO
The Epiphone G-400 Exclusive Deluxe PRO Electric Guitar is modeled after the original 1960s classic "SG" (Solid Guitar) and features a AAA Flame Maple Veneer top, Alnico Classic PRO humbuckers with push/pull coil-splitting, and Wilkinson Vintage Classic Machine Heads.
Classic 60s Era "Solid Guitar"
The G-400 Deluxe PRO is inspired by the first generation of SGs made in the 1960s at the legendary Gibson and Epiphone factory in Kalamazoo, Michigan that produced the Les Paul and the Casino. The SG model was originally intended to replace the Les Paul, which temporarily went out of production from 1961-1968. The new G-400 Deluxe PRO is constructed using the same dimensions and build techniques as vintage SGs and features a AAA Flame Maple Veneer top with a Mahogany body and neck with a comfortable 1960's SlimTaper 'D' profile and a 24.75" scale length. The Pau Ferro fingerboard has single ply binding with pearloid Trapezoid inlays, 22 medium jumbo frets, a 12" radius, and an adjustable truss rod with a 'bell' cover.
Alnico Classic PRO Humbuckers with Coil Splitting
The G-400 Deluxe PRO is powered by Alnico Classic PRO humbuckers made with Alnico-V magnets, which produce a slightly higher output especially in the mid and highs. Each pickup has it own Volume and Tone control with full-size potentiometers along with Epiphone's rugged, all-metal, 3-way toggle pickup selector switch for long-lasting performance. Both pickups are also wired for coil-tapping. By pulling up the pickup's volume knob, the humbucker will switch become a "single-coil" pickup, allowing players an infinite variety of tones from single-coil bark to full humbucker bite.
When winding humbuckers, Epiphone utilizes a double vacuum waxing process that ensures quiet operation free from microphonic hum. The pickup is first placed in the specialized wax vacuuming system before the cover is placed on the unit to ensure that the wax fully penetrates to the very center of the pickup and solidifies all parts. After the cover is placed on, it is again given a second vacuum wax bath until the unit is completely saturated with wax. Epiphone also uses high quality ABS plastic bobbins, 1010 Cold Rolled Steel pole shoes and pole screws, the finest magnet wire available.
Solid Epiphone Hardware
The G-400 Deluxe PRO features gold hardware on the Honeyburst, Trans Blue, and Trans Red color finishes and all G-400 Deluxe PROs come with a LockTone bridge and Stopbar tailpiece for incredible sustain as well as Wilkinson Vintage Classic Machine Heads with a 18:1 turning ratio.
Limited Lifetime Warranty
The G-400 Deluxe PRO comes with Epiphone's Limited Lifetime Guarantee and Gibson's world famous 24/7/365 expert Customer Service.
- Classic SG styling
- Alnico Classic PRO Humbuckers with Coil-Tapping
- Wilkinson Vintage Classic Machine Heads
zZounds is an authorized dealer of Epiphone products.
Gloss- Top Material:
AAA Flame Maple Veneer- Body Material:
Mahogany- Neck Material:
Mahogany- Neck Shape:
1960's SlimTaper; D profile- Neck Joint:
Glued In- Truss Rod:
Adjustable- Scale Length:
24.75"- Fingerboard Material:
Pau Ferro with pearloid Trapezoid inlays- Neck Pickup:
Epiphone Alnico Classic PRO; 4-wire- Bridge Pickup:
Epiphone Alnico Classic PRO; 4-wire- Controls:
-- Epiphone All-metal 3-way Pickup Selector
-- Neck Pickup Volume with push/pull coil-tapping
-- Bridge Pickup Volume with push/pull coil-tapping
-- Neck Pickup Tone
-- Bridge Pickup Tone- Fingerboard Binding:
1-ply; Cream- Fingerboard Radius:
22; medium-jumbo- Bridge:
LockTone Tune-o-matic/Stopbar- Nut Width:
Gold- Machine Heads:
Wilkinson Vintage Classics; 18:1 ratio
- Weight, Dimensions, and Manufacturer Part Numbers
Manufacturer Part Number (MPN):
- Transparent Blue
Manufacturer Part Number (MPN):
- Blemished, Transparent Blue