Eminence Kappa Pro LF Bass Speaker (10")

Load your bass amp cab or PA subwoofers with these mighty 10" speakers. With a frequency range of 47 Hz - 2 kHz, the Eminence Kappa Pros deliver huge lows.

Eminence's Kappa Pro series reaches a lower low with the Kappa Pro 10LF, a low frequency enhanced version of their popular Kappa Pro 10. With the low frequency content of modern music demanding more from the low end than in the past, the Kappa Pro 10LF excels with its high-BL, strong twin-reinforced cone, and high excursion suspension. Its high power handling capability (600 watts continuous, 1200 watts music program power) and its parameter set allow it to work in very compact vented or horn loaded bass guitar or subwoofer enclosures.

Take an in-depth tour of the Eminence speaker factory:
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.

- Nominal Basket Diameter: 10", 254 mm
- Nominal Impedance: 8 O
- Watts: 600 W
- Music Program: 1200 W
- Resonance: 39 Hz
- Usable Frequency Range: 47 Hz - 2 kHz
- Sensitivity: 91.6 dB
- Magnet Weight: 105 oz.
- Gap Height: 0.375", 9.5 mm
- Voice Coil Diameter: 3", 76 mm
- Resonant Frequency (fs): 39 Hz
- DC Resistance (Re): 5.47 O
- Coil Inductance (Le): 0.97m H
- Mechanical Q (Qms): 8.97
- Electromagnetic Q (Qes): 0.29
- Total Q (Qts): 0.28
- Compliance Equivalent Volume (Vas): 72.97 liters / 2.58 cu.ft.
- Peak Diaphragm Displacement Volume (Vd): 271.4 cc
- Mechanical Compliance of Suspension (Cms): 0.37 mm/N
- BL Product (BL): 14.46 T-M
- Diaphragm Mass Inc. Airload (MMs): 46 grams
- Efficiency Bandwidth Product (EBP): 132
- Maximum Linear Excursion (Xmax): 7.2 mm
- Surface Area of Cone (Sd): 376.9 cm2
- Maximum Mechanical Limit (Xlim): 16. mm
- Driver Volume Displaced: 0.067 cu.ft. / 1.9 liters
- Overall Diameter: 10.27", 260.9 mm
- Baffle Hole Diameter: 9.14", 232.2 mm
- Front Sealing Gasket: Yes
- Rear Sealing Gasket: Yes
- Mounting Holes Diameter: 0.28", 7.1mm
- Mounting Holes B.C.D.: 9.75", 247.7mm
- Depth: 5", 127 mm
- Net Weight: 17.2 lbs, 7.8 kg
- Shipping Weight: 18.35 lbs, 8.32 kgs
- Coil Construction: Aluminum voice coil
- Coil Former: Polyimide former
- Magnet Composition: Ferrite magnet
- Core Details: Vented and extended core
- Basket Materials: Die-cast aluminum basket
- Cone Composition: Treated paper cone
- Cone Edge Composition: Paper cone edge
- Dust Cap Composition: Treated Paper dust cap
Dimensions and Weight in Packaging
8 Ohms
Shipping Weight: 18.25 lbs
Shipping Dimensions: 12 x 12 x 7 in
Manufacturer Part Number (MPN): KAPPA PRO-10LF

For support or warranty questions, please contact the manufacturer:
Phone: 502-845-5622

Reviewers gave this product an overall rating of 5 out of 5 stars. (2 ratings)
Submitted June 27, 2015 by kendall j in greensboro, NC

"Eminence Kappa Pro LF"

Overall: 5 out of 5 stars
(see rating details)
I bought this to replace an original 10" that was in a Euphonic Audio VL110 cabinet. My intent was to have the original 10" re-coned. After seeing the massive 105 oz. magnet on this bad boy it might never happen. Delivers punchy smooth tone. Needs a lot of horsepower! Rated at 600 watts 1200 peak!!! I use a Bugera Veyron 1001T rated 2000 watt @ 4ohm 1000 watts @ 8ohm and the Eminence just laughs!!

Musical Background:

Been at it on bass 38 years and hacking guitars 48 years

Musical Style:

60s, 70s, 80s,90s, 2000s!, gospel, rock , funk, blues ,R and B, country
7 of 7 people (100%) people found this review helpful. Did you?
Thanks for your opinion!

8 Ohms

$199.99
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to