dbx DriveRack PA2 Speaker Management System
Tune your PA with dbx's AutoEQ room analysis, feedback suppression, graphic/parametric EQ, compression/limiting, alignment delay and crossover processing.
$655.00
- 12 payments of$54.58/mo
- No Credit Check6 payments of$109.17/mo
DBX Driverack Studio
No longer available at zZounds
zZounds Gear Experts Say...
Studio Monitor Management System
Overview
The dbx Professional Products DriveRack Studio provides all of the tools necessary to optimize Studio Monitor management in a single rack mount chassis design regardless of the environment. The DriveRack Studio offers dual XLR inputs and six XLR outputs, dual channel graphic EQ, classic dbx Compression, multiple crossovers, parametric EQ and a built-in real time audio analyzer. In addition, this audio toolbox provides the end user with 24 custom presets that have been specifically written and designed to work in tandem with the most popular studio reference monitors available. The DriveRack Studio now allows you to fine-tune even the most sonically challenged rooms.
The DriveRack Studio continues the legacy of DriveRack series, which has been created by the company that has been redefining the standard of signal processing for more than 30 years. The DriveRack Studio was designed with the purpose and vision of providing state-of-the-art signal processing in the studio environment, while utilizing a simple and intuitive user interface. This goal has been achieved by offering two independent channels of processing power with a linkable 28-Band Graphic equalizer, industry-standard dbx® stereo compressor module, feedback eliminator and the 120A Subharmonic Synthesizer on the input, with a six channel output system that includes parametric EQs, and Peak Plus limiters (which are used to provide protection against speaker blowouts) and alignment delay. These features combined with… read more the Wizard setup system, represent a methodical design that is guaranteed to deliver optimal, all-inclusive processing in a completely scalable system.
Features
24 Custom Factory Programs Optimized for Studio Monitor Management Applications
Dual 28-band Graphic EQ
Classic dbx Compressor
120A Sub-harmonic Synthesizer
2x3, 2x4, 2x5, 2x6 Crossover
Configurations
Stereo Multi-band Parametric EQ
Stereo Output Limiters
Alignment Delay
Pink Noise Generator
Auto-EQ with 28-Band RTA
2 Channel XLR Input and 6 Channel XLR Output
Front panel RTA-M XLR input with phantom power
24-Bit ADC/24-Bit DAC, >110 dB Dynamic Range
TypeIV Conversion System
Full Graphic LCD Display read less
The DriveRack Studio continues the legacy of DriveRack series, which has been created by the company that has been redefining the standard of signal processing for more than 30 years. The DriveRack Studio was designed with the purpose and vision of providing state-of-the-art signal processing in the studio environment, while utilizing a simple and intuitive user interface. This goal has been achieved by offering two independent channels of processing power with a linkable 28-Band Graphic equalizer, industry-standard dbx® stereo compressor module, feedback eliminator and the 120A Subharmonic Synthesizer on the input, with a six channel output system that includes parametric EQs, and Peak Plus limiters (which are used to provide protection against speaker blowouts) and alignment delay. These features combined with… read more the Wizard setup system, represent a methodical design that is guaranteed to deliver optimal, all-inclusive processing in a completely scalable system.
Features
24 Custom Factory Programs Optimized for Studio Monitor Management Applications
Dual 28-band Graphic EQ
Classic dbx Compressor
120A Sub-harmonic Synthesizer
2x3, 2x4, 2x5, 2x6 Crossover
Configurations
Stereo Multi-band Parametric EQ
Stereo Output Limiters
Alignment Delay
Pink Noise Generator
Auto-EQ with 28-Band RTA
2 Channel XLR Input and 6 Channel XLR Output
Front panel RTA-M XLR input with phantom power
24-Bit ADC/24-Bit DAC, >110 dB Dynamic Range
TypeIV Conversion System
Full Graphic LCD Display read less
Specs
Analog Inputs
Number of Inputs (2) Line inputs. (1) RTA Mic input
Connectors (2) Female XLR line inputs. XLR RTA Mic input
Type Electronically balanced/RF filtered
Impedance >40k ohm
Max Input line level +20dBu
CMRR > 45dB
RTA Mic Phantom Voltage: +15VDC
RTA Mic EIN: < -110dBu, 22Hz-22kHz, 150 ohm
Analog Outputs
Number of Outputs 6
Connectors Male XLR
Type Electronically balanced, RF filtered
Impedance 120 ohms
Max Output Level +20dBu
Audio Performance
Type dbx Type IV conversion system
Dynamic Range line 110 dB A-weighted, 107 dB unweighted
Type IV dynamic range 123 dB with transient material, A-weighted, 22kHz BW
121 dB with transient material, unweighted, 22kHz BW
115 dB typical with program material, A-weighted, 22kHz BW
Sample Rate 48kHz
THD+N 0.002% typical at +4dBu, 1kHz, 0dB input gain
Frequency Response 20Hz - 20kHz, +/- 0.5dB
Interchannel Crosstalk >110dB, 120dB typical
Crosstalk input to output: >100dB
Delay 10ms per channel (60 ms total)
Number of Inputs (2) Line inputs. (1) RTA Mic input
Connectors (2) Female XLR line inputs. XLR RTA Mic input
Type Electronically balanced/RF filtered
Impedance >40k ohm
Max Input line level +20dBu
CMRR > 45dB
RTA Mic Phantom Voltage: +15VDC
RTA Mic EIN: < -110dBu, 22Hz-22kHz, 150 ohm
Analog Outputs
Number of Outputs 6
Connectors Male XLR
Type Electronically balanced, RF filtered
Impedance 120 ohms
Max Output Level +20dBu
Audio Performance
Type dbx Type IV conversion system
Dynamic Range line 110 dB A-weighted, 107 dB unweighted
Type IV dynamic range 123 dB with transient material, A-weighted, 22kHz BW
121 dB with transient material, unweighted, 22kHz BW
115 dB typical with program material, A-weighted, 22kHz BW
Sample Rate 48kHz
THD+N 0.002% typical at +4dBu, 1kHz, 0dB input gain
Frequency Response 20Hz - 20kHz, +/- 0.5dB
Interchannel Crosstalk >110dB, 120dB typical
Crosstalk input to output: >100dB
Delay 10ms per channel (60 ms total)
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 844-776-4899
Web: https://www.dbxpro.com/en/support
Phone: 844-776-4899
Web: https://www.dbxpro.com/en/support
No longer available at zZounds
This is a carousel with product cards. Use the previous and next buttons to navigate.