Audio-Technica ATW-T1001 System 10 Wireless Bodypack Transmitter

Add another transmitter to your A-T System 10 wireless setup. This bodypack is compatible with lavalier mics and guitar cables with a cW-style connector.
The Audio Technica ATW-T1001 System 10 Wireless Bodypack is designed for use with the System 10 wireless system. This bodypack transmitter has a cW-style locking 4-pin connector.

Audio-Technica's System 10 is a digital high-fidelity wireless system designed to provide performing musicians and presenters with advanced 24-bit operation, easy setup and clear, natural sound quality. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues. System 10 receivers and transmitters offer an easy-to-read digital ID display.
- Operating Frequencies: 2.4 GHz ISM band
- Dynamic Range: >109 dB (A-weighted), typical
- Total Harmonic Distortion: <0.05% typical
- Operating Range: 30 m (100') typical - Open range environment with no interfering signals
- Operating Temperature Range: 0* C to +40* C (32* F to 104* F) - Battery performance may be reduced at very low temperatures
- Frequency Response: 20 Hz to 20 kHz - Depending on microphone type

Body Pack Transmitter Specifications:

- RF Power Output: 10 mW
- Spurious Emissions: Following federal and national regulations
- Input Connections: Four-pin Locking Connector (cW-style)
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +9V
- Batteries: Two 1.5V AA (not included)
- Battery Life: >7 hours (alkaline) - Depending on battery type and use pattern
- Dimensions (W x H x D): 2.76 x 4.21 x 0.98 inches
- Net Weight: 3.5 oz. (without batteries)
Dimensions and Weight in Packaging
(2.4 Ghz ISM)
Shipping Weight: 0.5 lbs
Shipping Dimensions: 10 x 6 x 3 in
Manufacturer Part Number (MPN): ATW-T1001
If you have additional warranty questions, please contact the manufacturer at 330-686-2600