Audio Technica AT3032 Studio Condenser Microphone

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
open zoom image for Audio Technica AT3032 Studio Condenser Microphone, Main
Audio Technica AT3032 Studio Condenser Microphone, Main
zZounds Gear Experts Say...
Outstanding performance and versatility.

The Audio Technica AT3032 is a studio condenser microphone for a variety of applications where an omnidirectional polar pattern is ideal.

Features:

Outstanding performance and versatility

High max SPL and wide dynamic range

Low self-noise (16 dB SPL) - perfectly suited for today's most sophisticated digital recording equipment

Flat, extended frequency response

Lo-cut switch (80 Hz, 12 dB/octave) and 10 dB pad

Element: Condenser

Dynamic Range (Typical): 132 dB, 1 kHz at Max. SPL

Polar Pattern: Omnidirectional

Phantom Power Requirements: 11 - 52V, 3 mA typical

Frequency Response: 30 - 20,000 Hz

Switches: 10 dB pad; roll-off

Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa

Low Frequency Roll-off: 80 Hz, 12 dB per octave

Impedance 250 ohms

Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.

Output Connector: Integral 3-pin XLRM-type

Signal to Noise Ratio: 78 dB, 1 kHz at 1 Pa

Weight: 4.0 oz (112 g)

Accessories Furnished: AT8405 stand clamp; foam windscreen; protective pouch

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
Owner's Manual

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer