RF Venue 4 ZONE Antenna Combiner

Manage a multi-zone wireless setup easily with an RF Venue 4 ZONE antenna combiner. Includes signal attenuation for fine-tuning RF levels in each area.

The 4 ZONE antenna combiner takes the complexity out of multizone wireless microphone projects. This wideband combiner (470-960 MHz) brings together up to four separate pairs of diversity antenna connections for multipurpose rooms, indoor-outdoor configurations, or main stages with secondary breakout rooms.

For fine tuning RF levels in each coverage area, 4 ZONE provides individual channel RF signal attenuation control down to -31dB in 1 dB steps. And for active antennas or in-line amplifiers, it features selectable 12V DC power to accommodate long cable runs.

With selectable on/off inputs, 4 ZONE also allows for quick control of coverage zones for roaming microphone transmitters, so you can choose which zones are active. When used in conjunction with up to four Diversity Fin Antennas and one or more DISTRO4 antenna distributors, 4 ZONE completes a turnkey package for any multizone wireless microphone project.
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.

Operating frequency: 470 to 960 MHz
Full system gain: 3 dB (+/-3 dB)
Input/output impedance: 50 ohms
A/B antenna input: 4 + 4
OIP3: 35 dBm (typ.) @ 2-tone; Pi=-15 dBm/tone
RF input attenuation: -31 ~0 dB (step: 1 dB)
Input connectors: BNC female (x 8)
Output connectors: BNC female (x 2)
In-line amplifier power: 12V/200 mA*8
Power supply: 100-240V AC, 50/60 Hz, max 2A
Dimensions: 480 mm (18.90") W x 260 mm (10.24") D x 45 mm (1.77") H
Accessories included: AC cable; BNC-to-BNC coaxial cable (x 2)
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 7.5 lbs
Shipping Dimensions: 22 x 13 x 4 in
Manufacturer Part Number (MPN): 4ZONE

Consumer Alert

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones

NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
Web: https://www.audio-technica.com/en-us/support/category/product-support/


  • 8 x
  • 6 x
  • 4 x
On Backorder
Preorder Today
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to