Audix M1280 Micro Condenser Microphone
No longer available at zZounds
zZounds Gear Experts Say...
Mic anything from orchestras to speeches with the Audix M1280. This condenser mic has an integrated preamp and an immunity to RF interference.
Overview
The Audix M1280, a miniaturized condenser microphone with a fully integrated preamp and detachable cable, has complete immunity from RF interference caused by cell phones and GSM devices. The M1280, is equipped with a cardioid capsule and gives the microphone the unique ability to be used in a wide variety of live, studio and broadcast applications.
- Miniaturized integrated preamp circuitry
- No external power adapter needed
- 12 mm gold vapor diaphragm
- Immune to RF interference
- Extremely low noise, high SPL handling
The Audix M1280 is available with a wide array of clips and accessories allowing the microphone to be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences and presentations.
- Ambient room miking
- Acoustic instruments
- Symphonic area miking
- Speech / Presentation
- Cymbals / Percussion
Features
- Small, lightweight, low profile- Miniaturized integrated preamp circuitry
- No external power adapter needed
- 12 mm gold vapor diaphragm
- Immune to RF interference
- Extremely low noise, high SPL handling
The Audix M1280 is available with a wide array of clips and accessories allowing the microphone to be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences and presentations.
Applications
- Overhead mic for choir, group vocal- Ambient room miking
- Acoustic instruments
- Symphonic area miking
- Speech / Presentation
- Cymbals / Percussion
Specs
Transducer Type: Condenser
Frequency Response: 40 Hz - 20 kHz
Polar Pattern: Cardioid
Output Impedance: 150 ohms
Sensitivity: 10.4 mV / Pa (C) at 1k
Signal/Noise Ratio (A-weighted): 73 dB
Equivalent Noise Level (A-weighted): 21 dB
Maximum SPL at .5% THD: >=150 dB
Dynamic Range: 129 dB
Power Requirements: 48 - 52 V
Connector: 3 pin mini-XLRm
Polarity:
-- Positive pressure on
-- Diaphragm produces
-- Positive voltage on pin
-- 2 relative to pin 3
Housing / Finish: Machined brass / Powder coat
Weight: 28 g / 1 ounce
Length: 90 mm / 3.5 inches
Included Accessories:
-- 25 foot cable with mini-XLRf - XLRm connectors
-- Mic stand adapter
-- Hanging clip
-- External foam windscreen
-- Carrying pouch
Frequency Response: 40 Hz - 20 kHz
Polar Pattern: Cardioid
Output Impedance: 150 ohms
Sensitivity: 10.4 mV / Pa (C) at 1k
Signal/Noise Ratio (A-weighted): 73 dB
Equivalent Noise Level (A-weighted): 21 dB
Maximum SPL at .5% THD: >=150 dB
Dynamic Range: 129 dB
Power Requirements: 48 - 52 V
Connector: 3 pin mini-XLRm
Polarity:
-- Positive pressure on
-- Diaphragm produces
-- Positive voltage on pin
-- 2 relative to pin 3
Housing / Finish: Machined brass / Powder coat
Weight: 28 g / 1 ounce
Length: 90 mm / 3.5 inches
Included Accessories:
-- 25 foot cable with mini-XLRf - XLRm connectors
-- Mic stand adapter
-- Hanging clip
-- External foam windscreen
-- Carrying pouch
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 503-682-6933 / 800-966-8261
Email: info@audixusa.com
Phone: 503-682-6933 / 800-966-8261
Email: info@audixusa.com
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.