The PM351 is ideal for live bands and church musicians, as well as studio musicians and singers. Having the ability to monitor a main mix along with the musician's voice and their instrument make the PM351 an effective and versatile tool. Learn more...
Mix your microphone with a main monitor mix for a perfect monitor mix that you can control. This monitor amp also works as a line tester. It has 1/4" input that accepts line and speaker levels and a mic pass-through for mixer connection. Learn more...
The MX28 is a 3-channel true stereo line mixer. Each channel has an individual 1/4 in. input for the right and left sides, and the outputs are individual right and left 1/4 in. jacks. Each channel has a level and pan (balance) control. The Master Level controls the output volume and the Headphone Level controls the level to the 2 headphone outputs.
Learn more...
The MX56c, an upgrade to the Rolls MX56s, features 4 inputs including a mono 1/4 in. line input, a stereo 1/8 in. (3.5mm) line input, a balanced XLR microphone input with jumperable phantom power, and a stereo RCA line input. A variety of outputs have also been included on the MX56c. Learn more...
The CS1000 is a price/performance breakthrough in the cable maintenance, signal testing market. It tests ten different types of cable ends. Each cable being tested has its pinout scanned for continuity as well as proper polarity. Learn more...
This device has single input, 4-output headphone amplifier, slider volume controls, full frequency response, and lots of output level. (In other words, it's loud!) Learn more...
Any musician or sound person knows how difficult it is to maintain cables. The CT 1 provides an efficient way to detect shorted or open cables. The unit tests 1/4 in. TS, 1/4 in. TRS, RCA, and XLR cables. Plus, it will test combinations of the above. This unit is a must have!
Learn more...
The MX54S Promix Plus mixes three microphones into two transformer balanced outputs. It has three XLR inputs, each with individually switchable phantom power, and Low Cut switches, a Level control, and a Pan control. As mentioned, it has two transformer balanced, XLR outputs. A 1/4 inch Aux/Headphone output has been provided along with a Clip indicator, Power indicator, and Power switch. The unit is also powered by two 9-Volt alkaline batteries. Learn more...
The HE18 is a 2-channel audio hum and buzz remover. Everyone knows how annoying it is to have 60 cycle hum in your sound. Now you can eliminate virtually all ground hum and buzz by simply inserting the HE18 into the audio path. Plus, the unit will convert an unbalanced signal into a balanced signal, and vice-versa. This greatly improves overall noise performance. Learn more...
The Rolls CL151 is a very versatile processor and can be used in any application where you need single channel mic or line level input processing. It is primarily designed for connecting studio mics to the inputs of hard disc recorders and has all the input stage processing power you need and an unbalanced 1/4 in. line level output. Learn more...
The PB223 is for powering phantom powered microphones with 48VDC. Since the units use a 100KHz switching power supply there is no audio noise generated. Learn more...
The DB25B is a transformer balanced, passive direct box. It features a Ground Lift switch for hum elimination, and an Attenuator control for padding the input signal from -20dB to -infinity dB. Padding the input signal provides a way to connect the DB25B to a line level signal, even a speaker level signal and connecting it to a balanced line or Mic input on a mixer. The two 1/4 inch; inputs are paralleled pass-throughs to also send the input signal to a tuner, pre amp, etc.. Learn more...
The MB35 converts stereo consumer level signals to professional line level signals - and vice versa. It may also serve as a balanced inline level control by patching the four RCA jacks together. IMPORTANT USB NOTE: When connecting the USB, your computer should recognize the connection. Rolls offer no support for using or setting up the USB, or interfacing with applications. Learn more...
The MX153 is a one-half rack space, two microphone and three stereo source mixer. The unit provides a compact and efficient way to mix sources such as AM/FM tuners, CD players, and video players with dynamic or condenser microphones. Applications include background music and paging for small clubs, churches, schools, restaurants, and much more. Learn more...
Want access to exclusive savings?
Get the zZounds All Access Pass - Free!
Receive weekly emails with blowout deals, and you may also win the Instant Rockband Giveaway! (You can unsubscribe anytime.)