ZVEX Channel 2 Boost Pedal

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
ZVEX Channel 2 Boost Pedal, Main
ZVEX Channel 2 Boost Pedal, Main
The Channel 2 makes your tone come alive, even with longer cable runs. Turn up the master for a clean boost, or crank the gain for sparkling distortion.

The ZVEX Channel 2 has two knobs: one controls Master Volume and the Gain control sweeps from unity to +24dB. The Gain control adjusts both the gain and DC bias on the MOSFET transistor at the same time. This causes a rushing noise when adjusted, it is perfectly normal behavior.

At lower gains, the Channel 2 has an input impedance of 5 Million ohms. This gives your guitar a very sparkly texture when plugging directly in. Even the longest dullest-sounding guitar cords come back to life. With the Master turned up, the Channel 2 is exactly the same as ZVEX's famous Super Hard-On pedal. With the Master Volume turned down, the Gain can be used to create clear, natural sounding distortion. If you prefer to overdrive the input of your favorite amp, then leave the Master up and let 'er rip!

- Current Draw: Less than 10mA
- Battery: No batteries for the Channel 2 9VDC center, negative supply is required
- Power Supply: 2.1mm barrel 9 volt negative tip, like Boss PSA adapter. Power supply not included
- Warranty: 1 Year non transferable Warranty against manufacture defect

For support or warranty questions, please contact the manufacturer:
Phone: 952-922-8320
Email: repairs@zvex.com
Web: https://www.zvex.com/repairs

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer