TASCAM US-322 USB Audio Interface

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
TASCAM US-322 USB Audio Interface, Angle
TASCAM US-322 USB Audio Interface, Bottom
TASCAM US-322 USB Audio Interface, Front
TASCAM US-322 USB Audio Interface, Main-
TASCAM US-322 USB Audio Interface, Angle TASCAM US-322 USB Audio Interface, Bottom TASCAM US-322 USB Audio Interface, Front TASCAM US-322 USB Audio Interface, Main-
With a stereo-mix mode that's ideal for tracking podcasts, plus built-in compressor, EQ, and reverb effects, this USB interface is a home-studio workhorse.

In the process of creating music, many engineers have started utilizing high-resolution formats while recording to ensure the best quality sounds. The TASCAM US-322 is suited perfectly for these types of recordings.

The TASCAM US-322 is designed with two XLR with +48V phantom power and two TRS inputs. Having both options for condenser mics and line level inputs ensures you are getting the best possible sound and lowest-noise when recording. In addition, INPUT-1 can connect to high-impedance equipment (like a guitar) directly.

On-board Effects

The US-322 is designed with on-board effects such as compressor, 3-band EQ, and Reverb -- all located on the DSP. While recording, you can use the input effects for any input signal and the reverb effect on any monitoring signal at the same time. The US-322 is built with a "Mixer Panel" button located conveniently on top. This button provides a one-click recall function for the DSP mixer. When pushed a second time, the mixer panel will be conveniently hidden.

Two Operational Modes

The multi-track mode is ideal for creating music. This mode delivers independent monitor-mixing from a send level -- like an inline console to a PC. In addition, this mode delivers monaural monitoring.

The stereo-mix mode makes podcast recording or broadcasting convenient and easy. An output audio signal from any PC can relay that signal back to the PC again via your DSP mixer. Any BGM from a PC can mix your voice by microphone then the mixed sound will… read more transfer back to the PC again.

Features:

- 2 XLR mic inputs with HDDA mic pres and +48V phantom power
- On-board digital mixer with selectable "Multi-track" or "Stereo mix" modes
- Built-in Effects: Insert, Compressor, EQ Send, Reverb
- Low-latency monitoring via the digital mixer
- Mixer panel provides intuitive operation for mixing and effects
- Output selector for each output
- Two balanced XLR microphone/TRS line inputs
- TRS balanced Line Outputs
- 1/4" TRS headphone output
- Cubase LE6 is included*
- 2-in/2-out USB audio interface
- 24bit/96kHz recording
- RCA line outputs

* (Included CUBASE LE can not record by 192kHz) read less

- Supported sampling frequency: 44.1/48/88.2/96/176.4/192kHz
- Supported bit rate: 16/24bit (Internal operation is 24bit)
- Analog audio Inputs
- MIC IN (INPUT 1/L, 2/R): XLR-3-31(1:GND, 2:HOT, 3:COLD), BALANCED
- Input impedance: 2.2kohms
- Nominal input level (INPUT:MAX): -65dBu
- Nominal input level (INPUT:MIN): -22dBu
- Maximum input level (INPUT:MIN) :-6dBu
- LINE IN (INPUT 1/L, 2/R) : 6.3 mm(1/4") TRS-jack(T:HOT, R:COLD, S:GND), BALANCED
- Input impedance: 15kohms(LINE)/1Mohms(GUITAR)
- Nominal input level (INPUT:MAX) :-39dBu(LINE)/-55dBV(GUITAR)
- Nominal input level (INPUT:MIN) : +4dBu(LINE)/-12dBV(GUITAR)
- Maximum input level (INPUT:MIN) : +20dBu(LINE)/+4dBV(GUITAR)
- LINE OUT (LINE OUT 1/L, 2/R) : 6.3 mm(1/4") TRS-jack(T:HOT, R:COLD, S:GND), BALANCED
- Output impedance: 100ohms
- Nominal output level: +4dBu
- Maximum output level: +20dBu
- LINE OUT (LINE I/O 3-4) : RCA pin-jack (When set to "OUTPUT" at LINE I/O switch)
- Output impedance: 200ohms
- Nominal output level: -10dBV
- Maximum output level: +6dBV
- PHONES
- Connector: 6.3mm(1/4 in.) stereo phone jack
- Maximum output level: 18mW+18mW or more(THD+N 0.1% or less, 32ohms loaded)
- USB
- Connector: USB B type 4-pin
- Format: USB2.0 HIGH SPEED mass storage class
- Power: USB bus powered (5V, Max 500mA)
- Power consumption: 2.5W
- Dimensions (W x H x D): 140 x 42 x 140 mm
- Weight: 500g
- Operating temperature: 5-35 C
- Bundle software: Cubase LE6
- Accessories: CD-ROM (includes dedicated driver), USB cable (1.5m), DVD-ROM (Cubase LE6),
- Insert sheet for Cubase LE, Warranty card
- Audio performance
- ADC chip set dynamic range: 102dB *1
- DAC chip set dynamic range: 106dB *2
- Frequency response
- Mic preampr: 10Hz to 68kHz, +0.5/-3.0dB
- MIC IN to LINE OUT: 10Hz to 40kHz, +0.5/-3.0dB
- MIC IN to PHONES: 10Hz to 30kHz, +0.5/-1.0dB
- THD: 0.0045% or less *3
- S/N ratio: 98dB or more *4
- EIN: -120dBu or less *5

System Requirements

- Windows OS:
- Windows XP:32bit SP3 or more, 64bit SP2 or more
- Windows 7:32bit, 64bit
- Windows 8:32bit, 64bit
- DRIVER: ASIO2.0, WDM(MME)

- Macintosh
- OS: Mac OS X Snow Leopard(10.6.8), OS X Lion, OS X Mountain Lion
- DRIVER: Core Audio

- *1 FS=48kHz, A-Weight
- *2 FS=44.1kHz, A-Weight
- *3 US-322:MIC IN to LINE OUT, INPUT 1/2 knobs at MIN position, FS=88.2/96kHz, JEITA
- *4 US-322:MIC IN to LINE OUT, INPUT 1/2 knobs at MIN position, FS=88.2/96kHz, JEITA
- *5 US-322:MIC IN to LINE OUT, INPUT 1/2 knobs at MAX position, FS=88.2/96kHz, JEITA

For support or warranty questions, please contact the manufacturer:
Phone: 323-726-0303
Web: https://tascam.com/us/support/contact

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer