Shure SM35 Cardioid Condenser Headset Microphone

The Shure SM35 headset microphone offers high gain before feedback with a tight cardioid pattern, and a comfortable, secure fit for active performers.

$99.00

  • No Credit Check
    6 x  
    $16.50
  • No Credit Check
    4 x  
    $24.75

Shure WH30 Condenser Headset Microphone

No longer available at zZounds
Available with either a standard XLR connector or a miniature TA4F plug, this Shure headset mic has a cardioid pickup pattern for better isolation.

The Shure Model WH30 Condenser Headset Microphone is a light yet rugged headset microphone. Designed for vocalists and instrument-playing vocalists, the WH30 utilizes a high quality electret-condenser cartridge suitable for all applications where mobility, comfort, low microphone-visibility, and high sound quality are required. Because of its cardioid (unidirectional) pickup pattern, the WH30 provides isolation from extraneous sound sources and high gain-before-feedback.

The wireframe and gooseneck adjust to any head size and shape. An integrated elastic headband comfortably pads and secures the headset. The WH30 is supplied with two snap-on windscreens, clothing clip, storage bag and cable-management device.

The WH30 is a perfect fit for those who desire total freedom of movement and need the high-quality audio of a condenser microphone.

Features

- Tailored frequency response enhances vocal range
- Flexible gooseneck for optimum microphone placement
- Isolation shock mount reduces vibration noise
- Low-profile, lightweight design
- Cardioid polar pattern provides maximum gain before feedback
- High sound pressure level capability
- Secure snap-on windscreen reduces "p" pops
- The RPM420 preamp requires phantom power from any 11 - 52 V source

- Type: Condenser, electret bias Condenser
- Frequency Response: 40 to 20,000 Hz
- Polar Pattern: Unidirectional (cardioid)
- Output Impedance (at 1kHz) : 2400 ohms
- Output Level (at 1 kHz; 0 dB = 1 V/Pascal) : -55.5 dB (1.7 mV)
- Signal to noise ratio (ref. A-weighted noise) : 63.0 dB at 94 dB SPL (IEC 651)
- Output Clipping Level (at 1000 Hz) : -22 dBV (0.08 V)
- Maximum SPL: 130 dB
- Dynamic Range (max. SPL to A-weighted noise level) : 99 dB
- Output Noise (equivalent SPL) : 31 dB (typical, A-weighted)
- Recommended Operating Voltage: 5 VDC (pin 2 to pins 3 and 4)
- Polarity: Positive sound pressure on diaphragm produces positive voltage on pins 3 and 4 relative to pin 1 (ground) on the mini TA4F connector.
- Conditions:
-- Operating Temperature -7 to 49 degrees C (20 to 120 degrees F)
-- Storage Temperature -29 to 74 degrees C (-20 to 165 degrees F)
-- Humidity: 0 to 95% (operating or storage)
- Cable: 1.2 m (4 ft.) two-conductor, shielded
- Cable Connector: mini TA4F or XLR
- Net Weight: Headset: 65 g (2.3 oz)

For support or warranty questions, please contact the manufacturer:
Phone: 800-516-2525
Email: service@shure.com

Reviewers gave this product an overall rating of 4 out of 5 stars. (2 ratings)
Submitted September 20, 2012 by Boris N in Brooklyn, NY

"good"

Overall: 4 out of 5 stars
(see rating details)
Verified Customer zZounds has verified that this reviewer made a purchase from us.
Good quality, good sound-natural, but not super a little bit worse then Shure SM58 but if you need free hands-very good, with mixers EQ you can make sound very good, Thanks

Musical Background:

40 years

Musical Style:

pop, jazz,rock
5 of 5 people (100%) people found this review helpful. Did you?
Thanks for your opinion!