SALE

Shure SLXD14/93 Lavalier Wireless Microphone System

This SLX-D wireless system includes an SLXD4 receiver, SLXD1 bodypack transmitter, and the WL93 -- Shure's tiny, easy-to-place omnidirectional lavalier mic.

$665.00

  • 12 x  
    $55.42
  • 8 x  
    $83.13
  • No Credit Check
    6 x  
    $110.83
  • No Credit Check
    4 x  
    $166.25

Shure ULXS14/93 UHF Subminiature Lavalier Wireless System

No longer available at zZounds
Get limitless mobility with this Shure wireless system. It has a predictive-diversity receiver and 300-ft range transmitter for continuous, concise sound.

ULX Standard UHF systems represent a breakthrough in performance and price for both working musicians and professional sound installers. Multiple system configurations provide limitless options, each with a choice of legendary Shure microphone transmitters. Over 1400 selectable, pre-programmed frequencies are available, and Automatic Frequency Selection provides a straight shot to a clear channel.

WL93 Lavalier Microphone

WL93 Microphones are economical omnidirectional, subminiature, lavalier, condenser microphones designed for general speech applications where a
visually unobtrusive microphone is desirable. All WL93 models are supplied with a mounting block with attached tie bar, a sew-on mounting bracket, and an acoustic windscreen to minimize wind noise in outdoor applications.

ULXS4 Diversity Receiver

- Automatic Frequency Selection
- Over 1400 selectable frequencies
- Predictive Diversity
- RF presence LED
- 5 segment audio meter
- 3 segment transmitter battery fuel gauge
- Multi-function LCD
- 1/2 rack design
- Detachable 1/4 wave antennas
- Durable plastic chassis
- Locking DC connector
- XLR and 1/4 in. outputs
- Mic/line switchable

ULX1 Transmitter

- 3 segment battery fuel gauge
- Backlit LCD shows group and channel
- Frequency and power settings
- Control lockout
- 8-hour battery life
- 300 ft (92m) operating range
- 20dB pad switch on ULX1

About ULX Series

Shure's ULX Series is wireless the way it should be - simple, agile, and bulletproof read more solutions that are affordable for working musicians and professional sound installers. Wireless traffic jamming your transmissions? The frequency agile ULX features Automatic Frequency Selection finds open frequencies for you. Whether ULX Standard or Professional Series Systems, the clear channels and strong transmission free you to concentrate on what matters most - your sound.

Consumer Alert
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones

NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.
read less

Channel Frequencies
Channel J1: 554 to 590 MHz
Channel M1: 662 to 698 MHz

RF Carrier Frequency Range: 554.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is used).

Effective Range: 100 m (300 ft.) under optimal conditions

Note: Actual working range depends on RF signal absorption, reflection, and interference.

Audio Frequency Response: 25 to 15,000 Hz, +/-2 dB

Note: Overall system frequency response depends on the micro-phone element. *Output Level: Microphone Level = Line Level - 20 dB

Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive volt-age applied to tip of WA302 phone plug) produces positive volt-age on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4 in. output

Transmitter Gain Adjustment Range: 25 dB

Receiver Audio Output Level (+/-38 kHz deviation, 1 kHz tone):
XLR connector (into 600 ohm load): +3.9 dBV (line), 17 dBV (mic)
1/4 in.connector (into 3000 ohm load) : 2 dBV

Impedance
ULX1 (input): 1 Megohm
ULXS4 (output): 50 ohms at line level; 2000 ohms at mic level

Modulation: +/-38 kHz deviation compressor-expander system with pre- and de-emphasis.

RF Power Output: 30 mW maximum

Dynamic Range: >100 dB, A-weighted

RF Sensitivity: 1.26 uV for 12 dB SINAD (typical)

Image Rejection: 80 dB typical

Spurious Rejection: 75 dB typical

Ultimate Quieting (reference +/-38 kHz deviation): >105 dB, A-weighted

System Distortion (reference +/-38 kHz deviation, 1 kHz modulation): 0.3% total harmonic distortion, typical

Power Requirements
ULX1: 9V alkaline battery (Duracell MN1604 recommended); 8.4V Nicad optional
ULXS4: 14 - 18 Vdc (negative ground), 550 mA

Battery Life: 8 to 9 hrs (with 9V Duracell MN1604 alkaline battery)

Operating Temperature Range: -20 degrees to 49 degrees C (-4 degrees to 120 degrees F)

Note: Battery characteristics may limit this range.

Overall Dimensions
ULX1 (H x W x D): 96.5 x 67 x 26.7 mm (3.86 x 2.68 x 1.10 in.)
ULX4S (H x W x D): 43 x 214 x 163 mm (1.72 x 8.56 x 6.52 in.)

Net Weight
ULX1: 79 g (2.8 oz.), without battery
ULXS4: 1049 g (2 lbs., 5 oz.)

For support or warranty questions, please contact the manufacturer:
Phone: 800-516-2525
Email: service@shure.com

Reviewers gave this product an overall rating of 5 out of 5 stars. (26 ratings)
Submitted September 28, 2006 by a customer from tikkatikka.com

"Shure wireless systems you can count on."

Overall: 5 out of 5 stars
(see rating details)
i have had this system for 3 years and similar in the range, all i can say is they are excellent, no loss of sound and no interference. what more can you ask for from a professional system.
Sound
superb sound was achieved without the need of to much eq, only need wa to apply low cut below 30hz.
Features
rack kit inclusive
Ease of Use
very simple, just turn on the reciever and wait 10 seconds, then turn on the transmitter, and your on.
Quality
very well made, and thoughtout. never had any faults on the systems that shure make at pro end.
Value
worth every penny, you get what you pay for, and this is one area you should invest wisely for pro audio market.
Manufacturer Support
yes i have dealt with the company over the years, they do expect you to read manuals fullty before picking up the phone

Musical Background:

pa and sound production director

Musical Style:

ambient world music
9 of 9 people (100%) people found this review helpful. Did you?
Thanks for your opinion!