Shure Beta 27 Condenser Microphone

This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Shure Beta 27 Condenser Microphone, New, Front
Shure Beta 27 Condenser Microphone, New, Side
Shure Beta 27 Condenser Microphone, New, Rear
Shure Beta 27 Condenser Microphone, New, Package Contents
Shure Beta 27 Condenser Microphone, New, Front Shure Beta 27 Condenser Microphone, New, Side Shure Beta 27 Condenser Microphone, New, Rear Shure Beta 27 Condenser Microphone, New, Package Contents
Acoustically isolate drums, amp cabinets, and instruments with the Beta 27's tight supercardioid pattern. It's ideal for "live in the studio" recordings.

The Shure Beta 27 is a side-address condenser microphone that is precision engineered for professional sound reinforcement and project studio recording applications. Its flat frequency response and low self noise provide unerring performance in demanding environments. A tight supercardioid pattern insures high gain before feedback, and maximum isolation from other sound sources.

Features:

- Supercardioid polar pattern specifically targets the sound source consistently with greatly minimized bleed from off-axis sound sources
- Tailored for superior transient response from a low-mass, 1 inch externally-biased, ultra-thin 24 Karat gold-layered Mylar diaphragm.
- Flat, neutral frequency response for natural reproduction on stage or in the studio
- 3-position switchable low-frequency filter helps reduce unwanted background noise or counteract proximity effect for consistent, extended low-end
- -15 dB switchable attenuator handles extremely high SPLs with ease
- Premium electronic components and gold-plated internal and external connectors
- Internal pop filter with three separate mesh layers reduces wind and breath noise.

Type: Condenser (externally biased)

Frequency Response: 20 to 20,000 Hz

Polar Pattern: Supercardioid

Impedance: 160 Ohm

Sensitivity (at 1 kHz, open circuit voltage):
- -37 dBV/Pa
- 1 Pascal=94 dB SPL

Maximum SPL (1 kHz at 1% THD):
- 1000 Ohm load: 134 dB (148 dB, Pad on)
- 2500 Ohm load: 140 dB (154 dB, Pad on)

Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz):
- 85.5 dB
- S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted

Dynamic Range (at 1 kHz):
- 1000 Ohm load: 125.5 dB
- 2500 Ohm load: 131.5 dB

Common Mode Rejection (20 Hz to 20 kHz): > 50 dB

Clipping Level (20Hz-20 kHz at 1% THD):
- 1000 Ohm load: 2.0 dBV
- 2500 Ohm load: 8.5 dBV
- THD of microphone preamplifier when applied input signal is equivalent to cartridge output at specified SPL

Self-Noise (typical, equivalent SPL, A-weighted): 8.5 dB

Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3

Weight: Net: 428 g (15.1 oz.)

Switch:
- Attenuator: -15 dB
- Low Frequency Response: flat; -6 dB/octave below 115 Hz; -18 dB/octave below 80 Hz

Connector: Three-pin professional audio (XLR), male

Power Requirements: 48v DC phantom, 5.6 mA
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 2.25 lbs
Shipping Dimensions: 10 x 6 x 4 in
Manufacturer Part Number (MPN): SHU BETA27

For support or warranty questions, please contact the manufacturer:
Phone: 800-516-2525
Email: service@shure.com
Manual

Be the first to rate and review this product.

New

$419.00
  • 8 x  
    $52.38
Easy Payment Plans, No Interest (Ever)
Reserve Now
Preorder Today
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to