Rode VMP VideoMic Pro with Rycote Lyre Shockmount

One-man-band videographer? Record better audio to your DSLR camera with the Rode VideoMic Pro. Rycote's Lyre shockmount reduces vibration for cleaner sound.

$229.00

  • No Credit Check
    6 x  
    $38.17
  • No Credit Check
    4 x  
    $57.25

Rode VMP VideoMic Pro Shotgun Microphone

No longer available at zZounds
Mount the Rode VideoMic Pro shotgun microphone on your camcorder or DSLR camera, and capture top-quality audio for your video productions.

The RODE VideoMic Pro raises the bar set by the original RODE VideoMic, by combining broadcast quality audio with an ultra-compact and lightweight ergonomic design.

Incorporating features specific to high end video, the VMP also evolves many of the features that have made the VideoMic so successful. Noise transference has been significantly reduced using both a revised, more elegant shock mounting system and a lightweight premium cable.

Features

- Broadcast recording quality condenser microphone
- Compact design (only 150mm/6" length)
- Ultra-lightweight (only 85g/3oz)
- 9V battery powered, with up to 70 hours battery life (alkaline)
- Integrated shock mounting
- Integrated foam windshield
- 3.5mm stereo mini-jack output (dual mono)
- Two step High Pass Filter (flat, 80Hz)
- Three position level control (-10dB, 0, +20dB)
- Camera shoe mount with 3/8" thread for easy boompole mounting
- Ten year warranty*
- *following online registration

- Power: 9V alkaline battery (Current 7.8mA)
- Acoustic Principle: Line Gradient
- Directional Pattern: Super-Cardioid
- Frequency range: 40Hz-20kHz, selectable HPF @ 80Hz/12dB/octave
- Output impedance: 200Ohm
- Signal noise ratio: 74 dB SPL (A - weighted per IEC651)
- Equivalent noise: 20 dB SPL (A - weighted per IEC651)
- Maximum SPL: 134dB SPL (@ 1kHz, 1% THD into 1KOhm load)
- Maximum output voltage: +6.9dBu (@ 1% THD into 1kOhm)
- Sensitivity: -38 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Weight: 85g/3ozgm
- Dimensions: 95mm/3.74"mmH x 43mm/1.69"mmW x 150mm/6"mmD

Optional Accessories:
Boompole, Mini Boompole, PG1 Pistol Grip, VXLR, VC1

For support or warranty questions, please contact the manufacturer:
Phone: 562-364-7400
Web: https://rode.com/en/support/contact