Rode NT55-MP Condenser Instrument Microphones Matched Pair

Rode NT55-MP Condenser Instrument Microphones Matched Pair, Matched Pair, NT45-O Capsule

Rode NT55-MP Condenser Instrument Microphones Matched Pair, Matched Pair, In Use

Great on acoustic instruments or room ensembles, this matched pair of Rode NT55 small-diaphragm condensers comes with switchable omni and cardioid capsules.

Overview

What's more useful than a Rode NT55? A pair of Rode NT55s. Available as a stereo matched pair in the Rode NT55-MP set, the Rode NT55 small-diaphragm condenser microphone utilizes the 1/2" gold sputtered true condenser transducer used in the internationally renowned Rode NT5. The NT55 upgrades the NT5, adding a three-position 0/-10/-20 dB pad, and a three-position high-pass filter. It's supplied with Rode's NT45-O omnidirectional capsules, and NT45-C cardioid capsules.

A Workhorse Small-Diaphragm Condenser

The NT55 is a low-noise, balanced output microphone, exhibiting a wide dynamic range and full frequency response. Although clearly relevant to instrument miking, the NT55 is extremely well-suited to any situation where a small, unobtrusive, but powerful microphone system is required.

Capture Acoustic Instruments

The NT55 is intended for Film, Television, Broadcast, Live Performance, Theatre, Surround and Environmental recording applications, or wherever your imagination takes you. These small-diaphragm condenser mics are ideal for capturing drum overheads, acoustic piano, room ensembles, acoustic guitar, violin, saxophone, and more.

Switchable Omni and Cardioid Capsules

The NT55 comes with two different condenser microphone heads: the NT45-C cardioid capsules, and the NT45-O omnidirectional capsules. Try an ORTF or X/Y stereo pair with the cardioid capsules attached, or try the omni capsules for spaced pairs or incredibly natural-sounding spot mics.… read more

Three-Position Pad and High-Pass Filter

The NT55 circuit incorporates a three position variable PAD with 0 dB, -10 dB or -20 dB attenuation, and a three-position variable high-pass filter that enables you to step from a flat response to 75 or 150 Hz high pass filter.

Features:

- Matched Pair of NT55 microphones for stereo recording
- Interchangeable omnidirectional and cardioid capsules included
- Switchable 0/-10/-20 dB pad
- Three-position high-pass filter: flat, 75 Hz, or 150 Hz roll-off
- Pouch, windscreen, and clips included
- Active JFET impedance converter with bipolar output buffer
- Durable satin nickel finish

WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.

Specs

- Acoustic Principle: Pressure Gradient
- Active Electronics: JFET impedance converter with bipolar output buffer
- Capsule: 0.50"
- Polar Pattern: Supplied with NT45-O interchangeable omnidirectional capsules
- Address Type: End
- Frequency Range: 20Hz - 20kHz
- Output Impedance: 100 Ohm
- Maximum SPL: 136dB SPL (@ 1kHz, 1% THD into 1KO load)
- Maximum Output Level: 8.0dBu (@ 1kHz, 1% THD into 1KO load)
- Sensitivity: -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Equivalent Noise Level (A-weighted) : 15dB-A
- Power Options: +48V phantom power
- Weight: 220.00gm
- Dimensions: (H x W x D) 145.00 x 20.00 x 20.00mm
- Output: XLR Output
- Warranty: 1 year with free extension to 10 years following registration

Dimensions and Weight in Packaging
Matched Pair: Shipping Weight: 3.5 lbs; Shipping Dimensions: 15 x 12 x 5 in; Manufacturer Part Number (MPN): NT55MP

Documents and Manuals

For support or warranty questions, please contact the manufacturer:
Phone: 562-364-7400
Web: https://rode.com/en/support/contact

Manual

Rode's Description

Rode NT55-MP Condenser Instrument Mics

The Rode NT55-MP package includes an acoustically matched pair of Rode NT55 microphones. The NT55 utilizes the 1/2" gold sputtered true condenser transducer used in the internationally renowned RODE NT5. The NT55 is a low-noise, balanced output microphone, exhibiting a wide dynamic range and full frequency response. It is supplied with NT45-O interchangeable omnidirectional capsules.

The NT55 circuit incorporates a three position variable PAD with 0dB, -10dB or 20dB attenuation, and a three position variable high-pass filter that enables you to step from a flat response to 75 or 150 Hz high pass filter.

"I really liked the fact that by changing the capsules and moving the microphones around, I was able to get noticeably different tones with just two NT55s. All the while, the midrange stayed constant and clear... RODE has another winner in its stable." - Electronic Musician

"I was very impressed with the NT55. With its additional pad and filtering options I can see this microphone being a popular choice for both studio and stage applications as well as doing the hard yards on location recordings and foley sessions. Altogether, a sweet package from the RODE crew." - Audio Technology

"The NT55 is currently my microphone of choice for acoustic guitar and small percussion and I'm looking forward to trying it on other projects. You can buy cheaper small diaphragm microphones but if you want true professional performance at a giveaway price, the NT55 offers an excellent performance to price ratio so why compromise? The NT55 is perhaps the most highly specified small diaphragm microphone in its price range and its subjective performance is every bit as good as its paper specification. Having a choice of capsules really adds to its flexibility." - Sound on Sound

"I was completely blown away by the performance of this microphone. I called Sweetwater and said I need a mic that will pick up a 13 piece big band while still maintaining the live feel of the room with clarity and equal distribution of instrumentation. By using the NT55's omni-directional capsule, I accomplished exactly what I wanted ! (I am very picky) This mic went beyond my expectations. It is a great tool for anyone who films large events where you want to capture live instead of a studio sound." - Ryan Sutton, USA (Customer Review)