QSC PL380 Powerlight 3 Series Power Amplifier

No longer available at zZounds
Trust your PA to QSC. This mighty amp pushes 2500 watts per channel at 4 ohms, 1500 watts per channel at 8 ohms, and up to 8000 watts in mono bridged mode.

The PL380 by QSC is the ultimate analog power amplifier designed for the most demanding live audio users in tour rigs or fixed installations.

Check out our exclusive demo of the QSC PL380 Powerlight 3 Series Power Amplifier:


Features:

- Power Light switch mode power supply for highest efficiency and improved audio performance
- Flow-thru air path and solid aluminum heat sinks for maximum cooling
- DataPort supports remote computer control and/or external DSP-4 modules
- Detented gain controls with 1 dB steps for precise calibration
- Removable knobs with lock-out security plate to prevent unauthorized tampering
- User defeatable clip limiters and selectable low-frequency filter per channel (3 Hz, 30 Hz, or 50 Hz)
- Three selectable input gains (26 dB, 32 dB, or 1.2 V)
- Front and rear panel LEDs indicate status of switch settings at a glance
- Parallel Dataport, XLR/M and XLR/F connectors for simple loop-through connectivity
- Neutrik Speakon and "Touch Proof" binding post outputs
- Neutrik Powercon power cable remains secure on the road

STEREO MODE, Both Channels Driven:
- 8 ohms EIA 1 kHz 1% THD: 1500 W
- 4 ohms EIA 1 kHz 1% THD: 2500 W
- 2 ohms EIA 1 kHz 1% THD: 4000 W

BRIDGE MONO MODE:
- 8 ohms EIA 1 kHz 1% THD: 5000 W
- 4 ohms EIA 1 kHz 1% THD: 8000 W

- Maximum Distortion (20 Hz - 20 kHz, 1 dB below rated power) 4 to 8 ohms: 0.2%
- Frequency Response (8 ohms) : 20 Hz - 20 kHz, +/-0.2 dB
- Noise (20 Hz - 20 kHz, 32 dB Gain) :-104 dB
- Dynamic Headroom (4 ohms) : 2 dB
- Damping Factor (8 ohms) :200
- Output Circuitry: Class D
- Input Gain (1.2V setting) : 39.1 dB
- Input Impedance: > 10k ohms balanced, or unbalanced
- Cooling: Variable-speed fan, rear-to-front airflow
- Connectors (each channel): Input: XLR Male, XLR Female and 3-pin detachable terminal blocks (1 each per channel). Output: Neutrik Speakon (ch 1 wired to both channels) and 5-way binding posts. DataPort: HD-15, input signal in parallel with XLR input connectors
- Front Controls: AC Power Switch, Gain Controls, 21 detents, 1 dB steps (each channel)
- Front indicators (LED color): Power (Blue), Bridged (Yellow), Parallel (Orange), Clip/Prot (Red x 2), Level -10 (Orange x 2), Level -20 (Green x 2), Signal -35 (Green x 2),
- Rear Controls (with LED indicators): Input Mode: Bridge (Yellow), Stereo (Green), or Parallel (Orange), Gain / Sensitivity: 26dB (Orange), 32dB (Green), or 1.2V (Yellow), High Pass (each channel): 3 Hz (Off), 30 Hz (Yellow), or 50 Hz (Orange), Clip Limiter (each channel): Off, On (Yellow)
- Amplifier and Load Protection: Short circuit, open circuit, thermal, RF protection. On/off muting, DC fault shutdown, active inrush limiting
- Dimensions: (H x W x D) 3.5 x 19 x 15.63" (8.9 x 48.3 x 15.63 cm)
- Weight: 22 lbs (10 kg)

For support or warranty questions, please contact the manufacturer:
Phone: 800-772-2834
Web: http://qsc.com/support

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer