QSC E15 Passive, Unpowered Loudspeaker

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
QSC E15 Passive, Unpowered Loudspeaker, Main
QSC E15 Passive, Unpowered Loudspeaker, Angle Left
QSC E15 Passive, Unpowered Loudspeaker, Angle Right
QSC E15 Passive, Unpowered Loudspeaker, Rear
QSC E15 Passive, Unpowered Loudspeaker, Side
QSC E15 Passive, Unpowered Loudspeaker, Side Angle
QSC E15 Passive, Unpowered Loudspeaker, Main QSC E15 Passive, Unpowered Loudspeaker, Angle Left QSC E15 Passive, Unpowered Loudspeaker, Angle Right QSC E15 Passive, Unpowered Loudspeaker, Rear QSC E15 Passive, Unpowered Loudspeaker, Side QSC E15 Passive, Unpowered Loudspeaker, Side Angle
Big speakers, big sound. Loaded with a 15" woofer with 3.5" voice coil, QSC's E15 passive PA loudspeaker delivers 500 watts continuous/2000 watts peak power. Unpowered. Requires separate power amplifier.

The QSC E15 is a trapezoidal, two-way loudspeaker using a 15-inch, 500W, die cast aluminum frame woofer with a 3.5-inch voice coil. It is intended for use when high-power and authoritative low-end are needed from a full-range loudspeaker. A 2.8" compression driver attached to the 75-degree DMT waveguide assures that even distant listeners will be well covered.

E Series loudspeakers will perform very well with any quality, professional power amplifier -- but by taking advantage of the complete QSC entertainment system, more performance and options are available. Today's powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance.

When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.

Features:

- High output, professional quality sound with E15
- 500 W continuous power
- E Series Entertainment System: Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.
- Titanium diaphragm for high fidelity and long life
- Rugged tour-grade textured paint
- Foam-lined perforated steel grill
- Dual angle pole socket

NOTE: Single speaker only.

Note: Unpowered speaker,… read more requires separate power amplifier. read less

- Configuration: 1 x 15-inch, 2-way, non-powered
- Frequency Range (-10 dB): 59Hz - 20 kHz
- Coverage Angle: 75* conical
- Power capacity: continuous/peak: 500 W / 2000 W
- Sensitivity: 97dB, 1W@1m
- Output (peak SPL @ 1 m): 131dB
- LF Drivers: 380 mm (15-inch) driver with 76 mm (3.5-inch) voice coil
- HF Drivers: 38 mm (1.5-inch) exit, 76 mm (2.8-inch) voice coil, compression driver
- Nominal Impedance: 8Ohm
- Cross-over: Full-range only 1.55 kHz
- Input connectors: 2x NL4, 1 barrier strip
- Enclosure: Trapezoidal, plywood, black texture paint finish. Two side-mounted handles, Perforated, powder-coated steel grille with foam lining.
- Mounting and suspension: 6x M8 suspension points, dual angle, 35mm pole-socket

- Pole Socket Size: 1-3/8" (35 mm)

- Weight: 68 lbs. (31 kg)
- Dimensions: 16.5 x 28.2 x 17.5" (420 x 716 x 445mm)

For support or warranty questions, please contact the manufacturer:
Phone: 800-772-2834
Web: http://qsc.com/support
Spec Sheet
DSP settings for QSC E Series

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer