PreSonus ULT12 Full-Range Active Powered Loudspeaker

No longer available at zZounds
Maximize intelligibility and coverage with the "Ultra Long Throw" of PreSonus' ULT line -- these boxes fill space with sound like you've never heard before.

PreSonus ULT12 active loudspeakers combine the widest horizontal dispersion of any loudspeaker in their class (110*) with a focused vertical dispersion (50*) for an ultra-long throw. The result is even coverage throughout the space, enabling the audience to hear clearly wherever they are. Featuring a custom 12-inch low-frequency driver, PreSonus' rotatable Pivot X110 horn, and 1,300W (peak) of Class D power in a lightweight design, ULT full-range loudspeakers deliver first-rate speech intelligibility and natural music reproduction for mobile use and permanent installations.

Six Year Warranty

When you get ULT or AIR Loudspeakers, buy with confidence knowing your speakers are in it for the long haul. We take our build quality seriously, and if anything goes wrong with them in your first six years of ownership (assuming you don't throw them in a swamp or anything like that) the repair or replacement is on PreSonus.

Guaranteed.

Features:

Main Components:
- 12-inch custom Kevlar woofer with 2.5-inch voice coil
- WorxAudio-designed waveguide Pivot X110 horn for precise coverage
- Ultra-wide 110* horizontal dispersion
- Tight 50* vertical dispersion for longer throw
- 1,300 watts Class D power (650 watts continuous)
- XMAX preamp
- Onboard mixer with two combo XLR and 1/4" inputs
- Direct line-input channel output
- Single summed balanced output

Controls:
- Mic/Line Level
- Line/Level
- 3 operation mode presets
- FOH - normal live front of house
- DJ - Music playback
- Mon read more -- stage wedge floor monitor
- HPF On/Off
- Front LED On/Off

Convenience Features:
- Multi-angle enclosure for mains or monitor wedge application
- Defeatable front-panel LED
- Rugged, texture-painted birch enclosures
- Tour-grade 16 gauge steel grille
- Comfortable ergonomic handles
- 35 mm pole sockets with 6* downward tilt
- Integrated M10 rigging points for suspended installation
- Locking IEC connection
read less

Acoustic Performance:
- Configuration: 2-way biamped
- Frequency Response (-3 dB): 55 Hz - 18 kHz
- Nominal Coverage (-6 dB): 110 degrees x 50 degrees
- Maximum Peak SPL: 135 dB
- Crossover Frequency: 1.6 kHz

Transducer:
- LF Transducer: 1x12" Ferrite
- Voice Coil Diameter: 2.5"
- HF Transducer: 1.75" compression driver

Amplifier:
- Type: Class D
- Total Power Output: 1,300W Peak (650 RMS)
- LF Power: 1,000W Peak (500W RMS)
- HF Power: 300W Peak (150W RMS)
- Cooling: Free air convection
- Rated THD: <0.05% (20 Hz - 20 kHz)
- Dynamic Range: 119 dB (A-weighted)
- Bandwidth: 20 Hz - 20 kHz

Connections and Controls:
- Input Channels: 1 mic/line, 1 line
- Input Connector Types: 2 combo
- Line Input Impedance: 10 k ohms
- Maximum Input:+22 dBu
- Output Connector: 2 XLR (M): Mix out, Direct out
- Controls: Mic/Line Level, Line/Level, Preset Select, HPF On/Off, Front LED On/Off
- Indicators: DSP Preset, HPF On/Off, Front LED On/Off, Signal, Clip, Thermal
DSP
- Presets: FOH, MON, DJ
- HPF: 100 Hz, 4th-order Linkwitz-Riley
- Bit Depth: 24-bit
- Sample Rate: 96 kHz

Enclosure:
- Material: 15 mm Baltic birch
- Finish: Chemline polyurethane
- Grille: Powder-coated steel
- Dimensions (HxDxW): 25.25" x 14" x 13.9" (641 mm x 356 mm x 353 mm)
- Unit Weight: 52 lbs. (23.6 kg)
- Handles: 2 (Top and Side)
- Monitor Angle: 30"

Safety:
- Amplifier Protection: Over-current, DC, over/under-voltage, over-temperature, high frequency
- Transducer Protection: limiter

Power:
- AC Power Input: 100-230V, 50-60 Hz
- AC Power Consumption (1/8 Power): 150W

Suspension Mounting:
- Rigging Points: 12 M10
- Mounting: 35 mm, 2-position

- Pole Socket Size: 1-3/8" (35 mm)

For support or warranty questions, please contact the manufacturer:
Phone: 225-216-7887
Web: https://support.presonus.com