Peavey PVx 15 2-Way Passive, Unpowered PA Speaker, 15"

Upgrade your PA system with these powerful 15" full-range loudspeakers from Peavey. The PVX 15 speaker cabinet is loaded with a heavy-duty woofer. Unpowered. Requires separate power amplifier.

Decades of experience building the best sound reinforcement enclosures in the world has led to the next generation of PVX enclosures by Peavey.

PVX Loudspeakers are some of the most versatile enclosures on the market. Equally suited for live or pre-programmed music, these enclosures are designed to be used on a speaker stand or flown vertically or horizontally for permanent installation. The new and improved PVX lineup features the addition of foam grille cloth behind the powder-coated steel grille. This new design improves the weather resistance of the loudspeakers. No matter what the application, the PVX series is an outstanding addition to any sound reinforcement solution.

PVX series loudspeakers deliver superior sound quality by utilizing advanced materials such as the roadworthy molded polypropylene exterior. Lightweight, durable and weather resistant, these two-way speaker systems will handle more than 400 watts continuous power with 800 watts peak power. They feature heavy-duty woofers with 2-3/8" voice coils. The PVX 15 and PVX 12 include the Peavey RX(TM) 14 1.4" titanium diaphragm compression driver coupled to a constant directivity horn, while the PVX 10 features the Peavey RX(TM) 10N. Our Quadratic Throat Waveguide(TM) Technology makes our speakers more efficient at focusing the sound where it needs to be, ensuring louder performance with less likelihood of
unwanted feedback.

Features:

- Two-way sound reinforcement enclosure
- 15" heavy-duty woofer with 2 3/8" read more voice coil & 50 oz. magnet
- RX(TM) 14 compression driver, with 1.4 inch titanium diaphragm
- 400W program/800W peak power handling
- Peavey's exclusive Quadratic Throat Waveguide(TM) technology, 100 by 50 degree coverage
- Asymmetrical horn aims the sound down 10*, at the audience, not over their heads
- Crossover network for driver protection and EQ
- High frequency driver protection
- Durable plastic injection-molded trapezoidal enclosure
- Extra angled section on right side allows floor monitor use
- Full-coverage heavy-duty perforated steel grilles, with powder coat finish and weather resistant foam
cloth
- Pole mount molded-in
- Top, bottom and right side flying point inserts
PVX 12 Features
- Two-way sound reinforcement enclosure
- 12" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet
- RX(TM) 14 compression driver, with 1.4 inch titanium diaphragm
- 400W program/800W peak power handling
- Peavey's exclusive Quadratic Throat Waveguide(TM) technology, 100 by 50 degree coverage
- Asymmetrical horn aims the sound down 10*, at the audience, not over their heads
- Crossover network for driver protection and EQ
- High frequency driver protection
- Durable plastic injection-molded trapezoidal enclosure
- Extra angled section on right side allows floor monitor use
- Full-coverage heavy-duty perforated steel grilles, with powder coat finish and weather resistant foam
cloth
- Pole mount molded-In
- Top, bottom and right side flying point inserts
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
read less

Nominal Input Level
-20 dBu

-Input Impedance
1 M ohms (Effect Off)
22 k ohms (Effect On)

-Nominal Output Level
-20 dBu

-Output Impedance
1 k ohms

-Recommended Load Impedance
10 k ohms or greater

-Indicator
CHECK indicator (Serves also as battery check indicator)

-Connectors
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
DC IN jack

-Power Supply
Alkaline battery (9 V, 6LR61 or 6LF22) or Carbon-zinc battery (9 V, 6F22)
AC adaptor (PSA series: sold separately)

-Current Draw
16 mA

-Expected battery life under continuous use (These figures will vary depending on the actual conditions of use.)
Alkaline: Approx. 33 hours
Carbon: Approx. 14 hours

-Dimensions
73 (W) x 129 (D) x 59 (H) mm
2-7/8 (W) x 5-1/8 (D) x 2-3/8 (H) inches

-Weight (including battery)
430 g
1 lb

-Accessories
Owner's manual
Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"
Alkaline battery (9 V, 6LR61 or 6LF22)

-Options (sold separately)
AC adaptor: PSA series

* 0 dBu = 0.775 Vrms
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 56.25 lbs
Shipping Dimensions: 32 x 22 x 20 in
Manufacturer Part Number (MPN): 03620390
Pair
Shipping Weight: 112.5 lbs

Note: Unpowered speaker, requires separate power amplifier.

For support or warranty questions, please contact the manufacturer:
Phone: 877-732-8391
Email: customerservice@peavey.com
Web: https://peavey.com/c/Contact-Us

Reviewers gave this product an overall rating of 5 out of 5 stars. (4 ratings)
Submitted November 6, 2012 by Coty Knoblock in Bay Saint Louis, MS

"Lead vocalist & Rhythm Guitar"

Overall: 5 out of 5 stars
(see rating details)
Verified Customer zZounds has verified that this reviewer made a purchase from us.
I Uses These Great Sounding Speakers On Top Of My JBL 18" Subs And Man They Just Blow Me Away!! Great Sound And Big Bang For The Price !!!

Musical Background:

I Have Been Playing Professionally For 22 Years

Musical Style:

Country , Swamp Pop , & Rock
7 of 7 people (100%) people found this review helpful. Did you?
Thanks for your opinion!

New

$499.99
  • 8 x  
    $62.50
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to