Peavey PV215 Passive Unpowered PA Enclosure (2x15")

Get serious bang for your buck with the Peavey PV215 PA loudspeaker. These full-range speakers deliver 700 watts RMS in an innovative quasi-3-way design. Unpowered. Requires separate power amplifier.

Need some big, powerful, and affordable main speakers for your PA system? Peavey delivers the goods with the full-range PV215 2-Way PA Enclosure. As the largest member of Peavey's long-running "performance-meets-value" PV series, the PV215 cabinet houses two beefy 15" woofers for the low end, plus a RX14 compression driver on a constant-directivity horn that covers a 60 x 40-degree angle. With an impressive 1,400 watts peak power handling (700 watts program), a pair of these speakers can easily rock your party. And with a sturdy wood enclosure, steel grille and handles, and the heavy-duty black carpet cover, your Peavey PV215s will survive the trip back to your practice space.

Quasi-3-Way Design: Highs, Mids, and Lows

While some 2 x 15" speakers pump the same low-end through both woofer drivers, the PV215 has a quasi-3-way design. That means the bottom woofer handles only the deepest low frequencies, while the middle driver handles both lows and low-mids up to the crossover frequency of 2.6 kHz. Special attention to key mid frequencies means these speakers can cut through for clearer vocals and speech applications. Plus, your PV215's dual 15-inchers are capable of reproducing down to a deep 44 Hz, delivering plenty of low-end punch. Plus, since Peavey knows that replacing a blown fuse is far easier than replacing a blown speaker, the PV215's internal crossover network includes tweeter protection to help your speakers stand up to real-world abuse.

Big Speakers, Big Sound, and Still Easy to Move

read more While the Peavey PV215 enclosures are just over four feet tall, thanks to their passive design, these speakers are relatively light for their size and wattage. At 79 pounds, a PV215 is a piece of cake for one person to roll on a hand truck. And with two 1/4" phone jacks, they're easy to hook up in parallel. But perhaps the most impressive spec with the Peavey PV215 PA speakers is their ultra-low price-to-performance ratio. Good sound on a budget is the name of the game with Peavey's PV series, and the PV215s are no exception.

Check out our exclusive demo of the Peavey PV215 2-Way PA Enclosure:


Features:

- Quasi-3-way speaker design for pronounced highs, mids, and lows
- 700 watts RMS (program), and 1400 watts peak power handling
- Dual 15" woofers and RX14 1.4" titanium-diaphragm driver
- Rugged steel grill, steel handles, wooden enclosure, and black carpet cover
- Dual 1/4" input jacks
- Exceptional price-to-performance ratio

Peavey's PV series of PA speakers and power amplifiers are a great fit for bands and artists, small- to mid-sized music venues and clubs, mobile DJ rigs, and more. Topping out at a thundering 123.5 dB maximum sound pressure level, the PV215s are hugely popular with anyone who needs a whole lot of power at a budget-friendly price. After all, there aren't many 700-watt RMS speakers available at this price point. But with the Peavey PV215, affordability doesn't mean compromising quality.

Note: Unpowered speaker, requires separate power amplifier.
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
read less

- Frequency Range (-10 dB, half space): 40Hz to 21kHz
- Frequency Response (+/- 3 dB, half space): 58Hz to 17kHz
- Sensitivity (1w/1m): 98dB
- Power Rating (program): 700 Watts
- Peak Power Capacity (peak): 1,400 Watts
- Maximum SPL: 123.5dB
- Transducer Complement: Dual Peavey heavy duty 15-inch premium woofers, RX14 1.4-inch titanium diaphragm dynamic compression driver on a 60 degrees x 40 degrees coverage constant directivity horn
- Driver Protection: Positive temperature coefficient resistor
- Nominal Coverage Pattern: 60 degrees x 40 degrees
- Electro-acoustic Crossover Frequency: 2.6kHz
- Nominal Impedance: 4 Ohms
- Input Connections: Two 1/4-inch phone jacks in parallel
- Enclosure Materials & Finish: Trapezoidal, black carpet-covered enclosure with dado-joined 1/2-inch MDF (Medium Density Fiberboard) and a full-length, black powdercoated steel grille

Dimensions (H x W x D):
- Front: 48.25 x 18.38 x 14.25 inches (122.6 x 46.7 x 36.2 cm)
- Rear: 48.25 x 11.75 x 14.25 inches (122.6 x 29.8 x 36.2 cm)

- Weight: 79 lbs. (35.9 kg)
- Optional System Upgrades: TLS(TM) 115X add-on subwoofer
Dimensions and Weight in Packaging
with Free CBI Speaker Cable (25 ft.)
Shipping Weight: 99.78 lbs
Base Item
Shipping Weight: 98 lbs
Shipping Dimensions: 50 x 21 x 16 in
Manufacturer Part Number (MPN): 00572170
Pair
Shipping Weight: 196 lbs

Note: Unpowered speaker, requires separate power amplifier.

For support or warranty questions, please contact the manufacturer:
Phone: 877-732-8391
Email: customerservice@peavey.com
Web: https://peavey.com/c/Contact-Us

Peavey PV215 Passive PA Speaker

The PV 215 is a 2-way speaker system based on dual 15" heavy duty woofers and an RX14 titanium-diaphragm dynamic compression driver mounted on a 60-degree x 40-degree constant-directivity horn. The lightweight-yet-rugged, carpet-covered trapezoidal enclosure facilitates portable use for live music or speech sound reinforcement, as well as music playback. A full-length, black powder-coated steel grille provides driver protection and a professional appearance.

The PV 215 speaker system is rated at 700 watts program power handling, and the full crossover network includes tweeter protection for clear, punchy sound and excellent long-term reliability. Two 1/4" phone jack input connectors make hook-up a breeze.

Features:

- 2-way sound reinforcement enclosure
- Peavey exclusive, heavy-duty woofers with a 2.375" voice coil
- RX14 titanium diaphragm compression driver with a 1.4" titanium diaphragm
- Tweeter protection
- 700 Watts program/1400 Watts peak power handling
- Heavy-duty crossover network for driver protection and EQ
- Lightweight trapezoidal enclosure
- 60 degree x 40 degree coverage constant-directivity horn for better off-axis tonality
- High quality, heavy duty carpet covering
- Steel handles
- Steel corners
- Rugged dado and rabbet construction for lightweight-but-strong joinery
- T-Nut speaker mounting
- Heavy-duty, full-length steel grille

Note: Unpowered speaker, requires separate power amplifier.

Reviewers gave this product an overall rating of 5 out of 5 stars. (173 ratings)
Submitted June 20, 2017 by a c in Murfreesboro, TN

"peavey 215"

Overall: 5 out of 5 stars
(see rating details)
Verified Customer zZounds has verified that this reviewer made a purchase from us.
man those speakers are really nice I did use peavey 215 passive 20 years ago playing in Mexico we use 8 /215's and 8 subs peavey the sound was perfect loud and clear of course using eq, crossover,maximizer,etc, any zise venue no problem now I'm dj, is ok still in music Im still using the same sistem peavey, and I will no change for nothing I did try qsc, man I break my bank and really I don't see any different in sound just the money comparation if you know how to eq your sistem any brand is good a lot of people think because is expensive is better no for me peavey is really good equipment and cheap I'm very happy with it
25 of 25 people (100%) people found this review helpful. Did you?
Thanks for your opinion!

New

$399.99
  • 8 x  
    $50.00
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to