Lighten Your Live Sound LoadMoving your PA around is unavoidable when you're a gigging artist, but Peavey's PR-12N loudspeakers can help lighten the load. Think about it: just to play one gig, you've got to pull your PA out of the rehearsal space and load it in the van. When you get to the venue, you lug the speakers inside, then set them up on stage. Play the show, yank the speakers off the stands, and back to the van they go. One more trip, returning to where you started, and you're finally done. Sounds like a lot of work for a few hours of glory, especially if you're touring from city to city. Wouldn't it be great to live the dream without all the heavy lifting? There's no way around the PA, but Peavey's under-30-pound PR-12N speakers deliver 400 watts program and 800 watts peak. That means huge sound without all the excess baggage.
Strong, Light, Polypropylene EnclosureAt just 29 pounds each, PR-12N speakers are perfect for the working musician -- saving time, energy, and trips to the van. While some loudspeakers use small, underpowered drivers to save weight, Peavy takes a different approach. The enclosure is molded using a strong, lightweight polypropylene. This material is rigid and durable to resist the road abuse all gig-worthy gear must face, yet light enough to accommodate full-sized drivers and still make weight. Heavy wooden cabinets just can't compare. You won't believe something so light can sound so good - until you hear then in action.
12-inch WooferPlug these passive speakers into your favorite power amp, and the first thing you'll notice is the rich, full-range bass response. This comes from the PR-12N's beefy twelve-inch woofer. Big drivers like this one aren't usually practical for lightweight speakers, because of their massive magnet structure. With its heavy-duty two-inch voice coil, this woofer delivers all your low-end tone to the crowd with warmth and punch.
Titanium-Diaphragm TweeterThe bass is definitely impressive, and Peavey's RX14 tweeter handles the highs with the same level of professionalism. Its 1.4-inch titanium diaphragm offers clean, detailed treble frequencies through the upper-end of the spectrum. The sound is focused through Peavey's constant-directivity horn, which is molded right into the enclosure. This horn helps spread out the sound waves, increasing the projection and improving the sonic imaging. If you run your front-of-house mix in stereo, you'll hear ping-pong delays, sweeping echoes, and other effects come through with clarity and precision. The PR-12N's sturdy crossover evens-out frequencies between the two-way drivers, providing smooth, balanced midrange response. No one wants lightweight speakers that don't sound good. Peavey gives you the best of both.
Plenty of Power for Any Size VenueIf you gig regularly, you never know what the next venue will bring your way. Some rooms are small and intimate, packing the crowd in tight, while others are much larger, looking empty even when all your fans show up. You need to fill the space with sound, regardless of its size. That means PA speakers with big-time wattage. Rated at 400 watts of program power and 800 watt peaks, PR-12N loudspeakers have the volume and headroom to fit any situation. Crank the music up at the larger halls for distortion-free sound reproduction, or drop it down low at the local coffee shop. You can use your PA to add a little vocal boost over an acoustic guitar, or run the whole band direct for a tight, controlled mix. Either way, these speakers give you detailed, accurate sound at any volume.
Long-Lasting Reliability at a Low PriceSince the PA system is what connects your music and your audience, you've got to know it's always ready to go. Fortunately, Peavey's solid reputation for long-lasting value is clearly evident in PR-series speakers. For starters, onboard tweeter-protection circuitry helps guard against damage from feedback, dropped microphones, and other unexpected surges in power. Next, the twelve-inch woofer is covered with a steel-mesh grille, shielding the speaker from unfortunate accidents involving mic stands, guitar necks, and the occasional beer bottle. It is powder-coated to provide a professional appearance on stage, even under the harshest conditions. These speakers are a fantastic deal at this price, and you can count on rock-solid performance for years to come.
zZounds is an authorized dealer of Peavey products.
- Dimensions: 18.25 in. W x 24 in. H x 14.5 in. D (Unpacked)
- Weight: 29.5 lbs. (Unpacked)
- Impedance: 8 ohms
- Weight, Dimensions, and Manufacturer Part Numbers
- Grey, 8 Ohms
Manufacturer Part Number (MPN):
- Warehouse Resealed, Grey, 8 Ohms
Manufacturer Part Number (MPN):
If you have additional warranty questions, please contact the manufacturer at 877-732-8391
Peavey PR12N LoudspeakerThe PR series delivers superior sound quality by utilizing advanced materials, like its lightweight, roadworthy molded polypropylene exterior. The PR 12 is a two-way speaker system that is lightweight yet rugged for live music or speech applications and will handle 400 watts program and 800 watts peak. It utilizes a heavy-duty 12 inch woofer with a 2 3/8 inch voice coil and a RX14 1.4 inch titanium diaphragm compression driver coupled to a constant directivity horn. Its durable injection molded enclosure features a black powder-coated steel grille that provides driver protection and a professional appearance. This system can be used on the floor, be pole mounted or flown via top and bottom flying inserts. Connections are made via two 1/4 inch phone jack connected in parallel to accommodate daisy-chaining.
Features- Two-way sound reinforcement enclosure
- 400 watts program, 800 watts peak
- One 12 in. woofer with 2 3/8 in. VC
- RX14 compression driver with 1.4 inch titanium diaphragm 1 inch exit
- 90 x 40 constant directivity horn
- Tweeter protection
- Heavy-duty crossover
- Lightweight molded polypropylene enclosure
- Molded-in pole mount system
- Heavy-duty metal grille