Our recommended alternative

Moog Mother-32 Semi-Modular Analog Synthesizer

Put that classic Moog analog synth sound on your desktop. This "Mother" gives you a Moog Ladder Filter, 32-step sequencer, 32 patch points, MIDI in and more.

Moog Mother-32 Semi-Modular Analog Synthesizer

$599.00
  • 12 x  
    $49.92
  • 8 x  
    $74.88
  • No Credit Check
    6 x  
    $99.83
  • No Credit Check
    4 x  
    $149.75
FREE Shipping

Moog Werkstatt-01 Analog Synthesizer Kit

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Moog Werkstatt-01 Analog Synthesizer Kit, Main
Moog Werkstatt-01 Analog Synthesizer Kit, Angle
Moog Werkstatt-01 Analog Synthesizer Kit, Circuitry
Moog Werkstatt-01 Analog Synthesizer Kit, Main Moog Werkstatt-01 Analog Synthesizer Kit, Angle Moog Werkstatt-01 Analog Synthesizer Kit, Circuitry
Build your own super-fat-sounding, patchable analog synthesizer -- no soldering required! The limited-edition Werkstatt-01 comes in an easy-to-assemble kit.

The Moog Werkstatt-01 is a patchable, 100% analog synthesizer whose design is based on classic Moog circuits. Assembly is extremely simple: Any user can quickly build this analog synthesizer with minimal tools and expertise. Through assembly and inspired investigation, the Werkstatt-O1 is an excellent platform for exploring the world of analog synthesizer circuits. A lifetime of experimentation, knob twisting, and sound design awaits.

OSCILLATOR SECTION
- Single VCO w/ frequency control (8Hz to 16KHz)
- Saw and square waveshapes w/ control for square pulse width
- Envelope or LFO selectable Mod Source that can be assigned to PWM or Pitch w/ Amount control
- Ability to PWM the square wave

FILTER SECTION
- Classic 4-Pole Moog Ladder Filter w/ Resonance control (20Hz-20KHz)
- Select between the Envelope generator and LFO as Mod Source.
- Polarity switch (+/-) and amount knob for control of filter cutoff modulation

LFO SECTION
- Selectable Square or Triangle waveshape w/ rate control (2Hz-600Hz)

VCA/AMP SECTION
- Select between the Envelope Generator or ON (Drone)

ENVELOPES SECTION
- Controls for Attack & Decay time w/ Sustain On/Off switch

KB SECTION
- One octave low-note priority legato keyboard w/ glide control

PATCHBAY:
- VCA Input: 0V to +5V in VCA EG Mode, +/-2.5V in VCA ON Mode
- VCF Input: -5V to +5
- VCO LINEAR FM Input: +/-2.5V - NOTE: this is an inverting control input
- VCO EXPONENTIAL FM Input: -5V to +5V, 1V/Octave trimmable
- LFO CV Input: 5V to +5V - NOTE: Negative CV slows LFO more than the panel
- VCF AUDIO Input: Unbuffered/Unmixed AC coupled input to VCF
- 2x KB CV Output: 3V/semitone from 1 keyboard - NOTE: Attenuate for 1V/Octave
- 2x TRIG Output 5 msec pulse, 0 to +5 V signal generated from low-note priority
- 2x GATE Output: 0 to +5V signal generated from low-note priority
- 2x EG Output: 0 to +5V signal, Simple ASD or AD type Envelope Generator
- 2x LFO Output: -2.5 to +2.5V Triangle or Square wave, selected via LFO Switch
- 2x VCF Output: -2V to +2 V signal for audio or CV uses
- 2x VCO Output: 0V to +5V VCO signal, wave selected by VCO Wave Switch

Rear Panel:
- AUDIO Output Nominal +/-1.5V Signal
- POWER+12VDC Center Positive w/ 1.2A Wall transformer
- POWER CONSUMPTION 1.8 Watt AVG

For support or warranty questions, please contact the manufacturer:
Phone: 828-251-0090
Email: techsupport@moogmusic.com
Web: https://moogmusicsupport.zendesk.com
Manual

Be the first to rate and review this product.

No longer available at zZounds