Product Description
A tricked-out version of the ROD880, the ROD881 Real Overdrive/Distortion offers even more tone shaping control than its older cousin. Powered by a hand-selected 12AX7WXT preamp tube, the ROD881 takes all the great overdriven tube sounds of the ROD880 and turbo charges them by adding a switchable Distortion mode for searing, super-saturated guitar tones that rival the biggest of the big rigs in the amp world. In addition, the ROD881 features a Footswitchable Boost mode that effectively adds another channel to your amplifier.
The ROD881's switchable Distortion mode adds a secondary, cascaded gain stage into the signal path for even more extreme tube punishment than the ROD880. In addition to simply adding more Gain, the selectable OD/Distortion modes greatly increase the versatility of the ROD881, allowing it to function in a variety of roles from semi-clean booster to ultra-high gain preamp.
The ROD881's Footswitchable Boost function then allows the user to take full advantage of these sounds by creating an additional channel for quick changes between solos and rhythms. When combined with the various clean and drive settings on your amplifier, these two unique features create a multitude of easily accessible tone settings at the touch of your foot, effectively turning your amplifier into a 2- or 3-channel "uber" amp.
The tones of the ROD881 can be fine tuned using via its large, easy-to adjust control panel. Gain and Master Volume provide complete and precise command of the ROD881's output level and amount of Drive. Bass, Treble, and Mid Boost controls with extended operation ranges offer a limitless array of tonal options, from the classic "808" tone to extremely beefy low end chunk.
All of these sounds are then kept clean and noise-free via the rear mounted, switchable Noise Reduction circuitry with variable Threshold control and a 1:2 noise reduction ratio. Powered via a standard 9-volt DC adaptor that allows easy integration into your pedalboard or rack setup, the ROD881 offers the maximum amount of options for the distortion connoisseur.
Real Tube Series
Every musician knows that nothing can match the unique "sonic footprint" of a vacuum tube. The warmth of tone, dynamic responsiveness, and incredible sonic clarity of tube circuits is the stuff of legend. With this in mind, the Engineers at Maxon have spent years of research and development in order to create a line of guitar effects that would offer the sonic benefits of vacuum tubes coupled with the ease of use of a compact floor effect. The result is the Maxon Real Tube Series.
Each Real Tube model features a heavy-duty, bent steel chassis with air vent for tube. Only the highest quality components are used, including metal jacks and switches and hand-selected dual triode tubes. This combination of superior components and ingenious designs yields stunningly realistic tones that rival the most expensive tube gear.
When only the real thing will do, the Maxon Real Tube Series is the only choice.
Real Tube Series Features:
Rugged, Lightweight Chassis Made of 1/16" bent steel, extremely lightweight (approximately 1 pound) and strong. The chassis size allows for optimum component positioning to minimize cross-talk that can lead to excessive noise and signal coloration. Tube vent allows for sufficient cooling of internal triode
Internal Tube Power Each unit features a hand-selected Sovtek 12AX7WXT dual triode vacuum tube with ceramic socket and protective shield. Tube socket is isolated from PCB for low-noise operation.
Mechanical Bypass Switching Mechanical bypass switching using DPDT switch reduces switching noise inherent to tube circuits. High impedance buffers on Inputs and low impedance buffers on Outputs help to further reduce noise and provide transparent operation in bypass.
AC Power Operation Power using Maxon AC210N AC adaptor (120 VAC in / 9 VDC out. 200 mA center - / sleeve +).
LED Power/Boost indicator Ultra bright LED's indicate Effect status (on/off) and Boost status (on/off).
3-Year Warranty Godlyke Inc. guarantees to replace or repair (at their option) this product should it suffer from defects in materials or workmanship. Coverage period is one year for moving parts (example: pots, switches, jacks) and three years for non-moving parts (example: IC's, transistors, etc.).
Damages caused by accident, abuse, alteration, or misuse are not covered by this warranty. Product appearance and normal "wear and tear" (worn paint, scratches, etc.) are not covered by this warranty. No other warranty is expressed or implied.
zZounds is an authorized dealer of
Maxon products.
