Laney LFR-212 Active Guitar Speaker Cabinet (800 Watts, 2x12")

Pair your favorite preamp or amp modeler with this vertical 2x12" cab for the perfect mix of new and old. Fill up any room with up to 800 watts of power.

$1,069.00

  • 18 x  
  • 12 x  
    $89.08
  • 8 x  
    $133.63
  • No Credit Check
    6 x  
    $178.17
  • No Credit Check
    4 x  
    $267.25

Laney IRT-X Powered Expansion Speaker Cabinet (200 Watts)

No longer available at zZounds
Get more tone from your amp! This powered, 200-watt expansion cabinet is connected before the output section of your amp for full-range power and dynamics.

Take your set-up -- your guitar, your amp, your effects -- and add an IRT-X 200W RMS Expansion cab! The result? The best your guitar will ever sound! The IRT-X's Electro/Mechanical Reactive Linking (ERL) offers you tonal options previously unavailable for your tone.

The IRT-X connects to your amps output section -- before the speaker and mimics the electronic and mechanical interaction between them at full range. That means more punch, power, dynamics, more highs and lows, more clarity, more definition -- just more of your tone. The IRT-X is not an extension cabinet -- it's a 200W RMS powered expansion cabinet.

The key is Electro- Mechanical Reactive Linking (ERL)

Unlike an extension cabinet -- which sits after your output section, the IRT-X sits between your amps output section and your amps speaker and cleverly mimics the response characteristics of your on-board speaker.

Unlike most guitar speakers, which are commonly, rolled off above 4Khz the IRT-X houses a high quality flat response 8" Driver and a 1" Compression Driver. As soon as you connect the IRT-X, YOUR guitar tone has the capability for far more highs and lows, which means more tone!

Used in its most straightforward application the IRT-X gives you more of YOUR tone! And since it's your tone what better than to use it as your own personal guitar monitor on stage -- every gigging musician has run into problems hearing themselves on stage.

Your tone on stage

The IRT-X gives YOU the solution to hearing your read more own tone on stage. Better tone that you can hear -- it's a win-win situation.

The best signal path

Guitar players love effects but sometimes they can get in the way of your tone -- the best tone is the simplest tone.

Wet/Dry

Plug your effects into the IRT-X and you get all the benefit of your unadulterated guitar tone -- with effects only in the IRT-X giving you a Wet/Dry set up.

When more really does mean more

The IRT-X can be scaled up to fit even the biggest rigs, with 2 IRT-X's you can run true W/D/W rigs with amazing sonic implications.

The IRT-X has a super compact footprint which means you can have a massive sound on even the smallest stage

Onstage Mic-ing

Mic-ing the IRT-X is simple! The IRT-X comes equipped with an XLR DI out. Which can be sent directly to the PA and provides either a completely dry signal, or can be cabinet emulated -- with or without FX!
Emulation options include Dry, 112 or 412, so there is no need to use a mic & stand, which on a tight stage is great news. The on-board DI also means you get the same great tone night after night, venue after venue -- no more relying on mic placements.

DSP Modelling setup?

The use of hi tech modelling setups requires some specific considerations when it comes to amplification. The IRT-X is ideally suited to pairing with a modelling processor or DSP based DAW package as the IRT-X has a completely flat, full range frequency response -- meaning your carefully modeled signal path in not re-EQ'd during the amplification process.
read less

- Power: 200W RMS ICE POWER
- Inputs: XLR/Jack Combi inputs
- Drivers: High quality Flat Response 8" Bass driver + High quality 1" compression driver
- Cabinet Design: Offset Trapizoidal -- upright or monitor orientations
- FX Loop(s) : Stereo FX loop
- DI Socket: Balanced DI output with source switching
- Equalization: Master Treble & Bass EQ
- Line In: Jack
- Aux In: Mini Jack
- Cabinet Emulation: Switchable Cabinet emulation, Non, 1 x 12" or 4 x 12" options
- Speaker In and Thru connectors: Jack Socket
- Speaker Phase Switch: Allows for Phase reversal of the unit.
- Ground Lift: Hum busting ground lift switches
- Pole Stand Fitting: Top hat supplied as standard

For support or warranty questions, please contact the manufacturer:
Phone: 615-793-8787
Email: support@laney.co.uk

Reviewers gave this product an overall rating of 4 out of 5 stars. (1 ratings)
Submitted November 7, 2016 by Gilbert D in Chino, CA

"Great product for most applications, wish i could keep it"

Overall: 4 out of 5 stars
(see rating details)
Verified Customer zZounds has verified that this reviewer made a purchase from us.
Great little amp/speaker/cab/Di/amp attenuater. Great for all sorts of applications, goes loud enough for some band senerios. I used mine for an Frfr speaker with a pod hd500 and sounded great. The only downside to this little speaker which lead to me returniong it is that since its only 200 watts and an 8 inch speaker, it was not loud enough without clipping to be used in a cranked metal band with another guitarist, bassist, loud drummer, and keys. If you're a bedroom player or play in a band where you don't have to be heavily cranked such as a jazz group, this product is a dream come true. If they made these with more wattage i would have kept it because it sounded huge for being so small and light. Despite that, I definitely recommend this little guy.

Musical Background:

Playing guitar for 9 Years with a band and love to jam at home or small performances.

Musical Style:

Metal, Rock, Jazz, Worship
3 of 3 people (100%) people found this review helpful. Did you?
Thanks for your opinion!