With the MPX 1 in the effects loop of your stage rig and an MPX R1 on the floor, you're ready to take your favorite studio effects on the road. A single cable provides power and 2-way communication with the MPX 1* - dedicated stomp-box style buttons and LEDs give you complete access to the entire arsenal of MPX 1 effects. Don't have an MPX 1 yet? Use the R1 as a stand-alone MIDI remote controller. Either way, you get all the great features you expect from Lexicon.
Features
Dual relays for remote switching of as many as 4 amp channels
MIDI program select and control
Programmable expression pedal with toe switch
Dedicated footswitches for TAP tempo and MPX 1 A/B switching
All-metal chassis, pedal, and switches
The MPX 1 for dedicated reverb combined with studio quality effects - the MPX R1 for expressive control - the perfect choice for studio or live applications. The MPX 1 features 56 Pitch, Chorus, EQ, Modulation, Delay, and Reverb effects for a total of 200 preset programs all available from the MPX R1 MIDI Remote Controller.
Technical Info
Construction: All metal chassis, switches, and expression pedal
External control inputs: 1/4 in. T/R/S connector supports up to 3 on/off switches; 1/4 in. T/R/S connector for external expression pedal
Internal relays: 1/4 in. T/R/S jack connected to 2 internal programmable relays
MIDI Interface: 7-pin DIN connector provides phantom power and 2-way MIDI communication with the MPX 1 or MPX G2 5-pin DIN connectors for MIDI THRU and IN
Expression pedal: Vintage mechanical design, all steel construction, programmable toe switch
MIDI functions: MIDI bank and program select for up to 300 programs; Switches and pedal(s) can be individually set to transmit any controller. The status of each MIDI switch is indicated with a green LED. Tap tempo can be transmitted as MIDI Clock
Relay mapping: Different relay states can be memorized for each of 990 MIDI program numbers. Relays can operate as on/off 1-4 or as 2 independent on/off switches.
MPX functions: When connected to an MPX G2 or MPX 1 (V2.0) via 7-pin cable, LEDs automatically display the following each time a new program is loaded: Program number; Master Bypass state; A/B state; Tempo rate; State of each effect block (Pitch, Chorus, EQ, Mod, Delay, Reverb on MPX 1; Gain, Chorus, Delay, Effect 1, Effect 2, EQ, Reverb on MPX G2); effect on=green, effect bypassed=red, effect not active=off.
The state of any active effect can be instantly changed by pressing its associated switch.
Dedicated switches control A/B and tap.
Power Requirements: 9 volts AC (wall transformer included) 25-foot, 7-pin DIN cable for phantom power from MPX 1 or MPX G2 (included)
Dimensions (W H x D): 23 x 3 x 8 in. (584.2 x 76.2 x 203.2mm)
Weight: 9.5 lbs. (4.3 kg)
