Kustom Groove Bass 1200 Bass Amplifier Head (1200 Watts)

Offered in a convenient rack-mountable format, the Groove Bass 1200 amp dishes out 1,200 Watts of output power, more than enough to rattle the rafters on the largest stages. But more importantly, it serves up rich, full-bodied tone. The Groove Bass 1200 includes a 2-button footswitch (and footswitch cable) for Mute and Solo functions, plus a professional, locking Speakon speaker cable.

Features
Active/Pasive Input Selector Switch

9-Band Active EQ

BASS Control with Normal/Sub EQ Settings

MID Control with EQ Shift

HIGH Control with Normal/Define Settings

Pre or Post-EQ Effects Loop

Neutrik Speak-On Output Connectors

Signal Mute Switch & Tuner Output

Solo Boost Function

Technical Info

Input Impedance: 200K Ohms

Output Power:
* 450 Watts 8 Ohms @ 5% THD
* 750 Watts 4 Ohms @ 5% THD
* 1200 Watts 2 Ohms @ 5% THD

Frequency Response: 20HZ-20kHz (Actual response is tailored to speakers for accurate acoustical response using a bass guitar as input.)

Hum & Noise: -60db Residual Noise, all level controls 0% (minimum)

System Gain (All measurements taken with 1 KHz input signal, Tone controls flat, Gain and Volume Maximum. Measured at effects send output jacks on rear unless noted.):
* 27db Preamp output
* 15db Preamp output, Active
* 25db Tuner output
* 27db Direct output
* 32db Power amp gain

Amplifier Type: Class B. Descrete device Class B amplifier

Footswitch: Any non-momentary two-button foot switch can be used. Use any standard tip-ring-sleeve cable.

Power Requirements: 120VAC/60Hz, 1500W nominal

Dimensions (H x W x D): 3.5 x 19 x 15.5 in. (89 x 483 x 390 mm)

Weight: 31 lbs (14 kg)