JBL Control 29AV1 Premium Indoor/Outdoor Speaker

No longer available at zZounds
Install this weather-resistant JBL speaker for quality sound anywhere! Mount it vertically or horizontally with the included InvisiBall easy-mounting system.

Neither too large nor too small to suit the needs of mid-sized venues, the high-performance JBL Control 29AV1 speaker offers just the right specs and power capacity to deliver consistently excellent sound both indoors and out. This premium indoor/outdoor speaker is totally weather-resistant, magnetically shielded, and easy to mount, making it an ideal solution for a range of installed sound applications.

Customers: Please see specifications. This item is not built like a standard passive speaker, and requires optional accessories to work with standard amplifiers, speaker stands, speaker cables etc.

Full-Fidelity Audio

JBL's Control 29AV1 extended bandwidth, defined coverage, and upgraded voicing ensures that you get evenly flat, high-fidelity performance every time you power it on. The Control 29AV1's high-frequency horn is also adjustable, allowing you to rotate it for either vertical or horizontal use. And thanks to JBL's SonicGuard overload protection, massive overloads or clipping won't affect the quality of the Control 29AV1's sound. Drive these speakers hard and they'll still sound good. Although these speakers are a bit larger than standard compact loudspeakers, they make up for their size by providing exceptionally well-controlled coverage and sound characteristics in any listening area.

Totally Protected in Rain or Shine

Speaking of different listening areas, the Control 29AV1 performs well no matter where you put it. If it's in use during an outdoor concert read more and it starts to rain, no worries -- the speaker will still do its job. Designed to handle any weather situation, the Control 29AV1 has a Kevlar woofer cone with a butyl rubber surround and a rear-loaded driver basket to protect it from direct exposure to the elements. What's more, the speaker sports a titanium compression driver, thermoset composite coated grille (with foam to minimize water incursion), rust-resistant nickel/zinc terminals, and a sealed-entrance cover to protect the speaker's terminals.

The magnetically shielded Control 29AV1 can be placed near video monitors, as close as 9 inches away, without getting visual distortion or damage resulting from prolonged exposure. Moreover, its line distribution transformer allows you to run the speaker off of either 70V or 100V distributed speaker lines, while its 8-ohm impedance allows multiple loudspeakers to be connected to a single line.

InvisiBall Makes It Easy to Install

Use its included InvisiBall mounting hardware to install the Control 29AV1 on a wall, ceiling, or anywhere you need it. Rotate the speaker horizontally (up to 41 degrees off-axis) or vertically (up to 36 degrees) and aim it directly at your listeners.

The Control 29AV1 includes a MTC-PC2 input panel cover, the InvisiBall mounting base, and a 6 mm x 260 mm InvisiBall Hex wrench. Please note that it requires optional accessories to work with standard amps, speaker stands, speaker cables, and so forth.

Features:

- Extended bandwidth, extremely smooth frequency response
- 110 x 85 degree HF coverage, rotatable horn
- 110W transformer for 70V or 100V lines, with 8W thru
- SonicGuard overload protection offers full-range power limiting to protect network and transducers
- 8" (200 mm) Kevlar cone woofer for booming lows
- 1" (25 mm) titanium diaphragm compression driver for crystal-clear highs
- Weather-resistant design for indoor or outdoor use
- InvisiBall mounting hardware included (also ten 6 mm suspension points)
- Sealed input panel cover and screw-down input terminals
- Frequency Range: 40 Hz to18 kHz (-10 dB)
- Power Capacity: 300 W Continuous Program Power 150 W Continuous Pink Noise
- Frequency Response: 45 Hz to 18 kHz ( +/- 3 dB)
- Max SPL @ 1m: Short-Term: 120 dB; Long-Term: 114 dB
read less

Optional Accessories:
- MTC-29CM to install speaker down from the ceiling
- MTC-29UB U-bracket
- MTC-29NL4A Neutrik Speakon NL4 Adapter Plate for Control 29AV


Terminations: Screw-down terminal strip, zinc-plated copper base, nickel-plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5 mm2).

Specifications:
- Frequency Range: 40 Hz -18 kHz (-10 dB)
- Power Capacity: 300 W Continuous Program Power 150 W Continuous Pink Noise
- Transformer Taps: 70 V: 110 W, 55 W, 28 W & 14 W 100 V: 110 W, 55 W, & 28 W Thru Position: 8W nominal
- Frequency Response: 45 Hz - 18 kHz ( +/- 3 dB)
- Maximum SPL @ 1m: Short-Term: 120 dB; Long-Term: 114 dB
- Nominal Sensitivity: 90 dB (2.83V / 1m)
- Nominal Coverage Angle: 110* H x 85* V, rotatable
- Directivity Factor (Q): 7.2 dB, averaged 500 Hz to 16 kHz
- Directivity Index (DI): 8.6 dB, averaged 500 Hz to 16 kHz
- Nominal Impedance: 8 ohms
- Minimum Impedance: 6.3 ohms @ 230 Hz
- Crossover Network: 3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover frequency
- Low Frequency: 200 (8 in) kevlar cone with pure butyl rubber surround, 50 mm (2 in) voicecoil on fiberglass former
- High Frequency: 25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround
- Enclosure Material: High impact polystyrene
- Grille: Thermoset composite coated steel, WeatherMax multi-layer foam
- Overload Protection: Full-range power limiting to protect network and transducers. Serviceable internal fuse to protect during exceptional overload conditions.
- Environmental: IEC 529 IP-X5 rating. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray.
- Safety Agency Rating: Transformer is listed per UL1876
- Colors: Black or white (-WH)
- Dimensions (H x W x D): 520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in.)
- Net Weight (ea): 12.2 kg (26.8 lb.)
- Shipping Weight (ea): 14.0 kg (30.8 lb.)
- Included Accessories: 1 piece MTC-PC2 input panel cover, InvisiBall mounting base, 6 mm x 260 mm InvisiBall Hex wrench.

For support or warranty questions, please contact the manufacturer:
Phone: 800-336-4525
Web: https://jblpro.com/en/support for pro audio, https://support.jbl.com for consumer/home audio

JBL Control 29AV1 Premium Speaker

Control 29AV1 from JBL has upgraded voicing for evenly flat, high fidelity performance. With an extended bandwidth and well controlled defined coverage you don't get with standard compact loudspeakers. Its high-frequency horn is adjustable allowing it to be used either vertically or horizontally. Ensuring excellent sound characteristics throughout its listening area these pro speakers are designed to maintain consistent coverage.

Customers: Please see specifications. This item is not built like a standard passive speaker, and requires optional accessories to work with standard amplifiers, speaker stands, speaker cables etc.

Magnetically shielded, the Control 29AV1 can be placed as close as 9 inches away from video monitors without the need to worry about visual distortion or damage resulting from prolonged exposure. With its top-quality line distribution transformer, this speaker can be run off of either 70V or 100V distributed speaker lines and its 8 ohm impedance allows multiple loudspeakers to be connected to a single line.

Features:

- Extended bandwidth, extremely smooth frequency response
- 110 x 85 degree HF coverage, rotatable horn
- 110 W transformer for 70 V or 100 V lines, with 8 W thru
- SonicGuard overload protection
- 8 inch (200 mm) Kevlar cone woofer
- 1 inch (25 mm) titanium diaphragm compression driver
- InvisiBall mounting hardware included (also ten 6 mm suspension points)
- Sealed input panel cover and screw-down input terminals

Convenient InvisiBall mounting method is not only easy to install, it has an adjustable aim and can be a very successful theft deterrent. InvisiBall rotates both horizontally (up to 41 degrees off-axis) and vertically (up to 36 degrees).

For maximum protection against weather, the Control 29AV1 sports a Kevlar woofer cone with a butyl rubber surround and a rear loaded driver basket to protect from varying degrees of direct exposure. Titanium compression driver, thermoset composite coated grille (with foam to minimize water incursion), rust-resistant Nickel/zinc terminals and a sealed-entrance cover is included to protect the speaker's terminals. Not to mention JBL's exclusive SonicGuard overload protection ensuring reliability while providing full fidelity audio.

Shown in Black finish.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer