ISP Technologies Impression Multi-Effects Pedal

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
ISP Technologies Impression Multi-Effects Pedal, Main
ISP Technologies Impression Multi-Effects Pedal, Main
Drench your tone in reverb, delay and chorus/flange with this rugged pedal. It even features a tap tempo control to keep your effect's pulse in perfect time.

The ISP Technologies Impression Pedal is a high quality DSP based stereo multi-effects processor with Chorus, Delay, Reverb and Flange. Use up to 3 effects simultaneously including chorus or flange plus delay and reverb. The Impression also includes a TAP button allowing easy adjustment of delay time and chorus or flange modulation time by measuring the time interval between two taps. Designed to be a perfect match with the THETA pre-amp pedal, the Impression will deliver a full complement of the most commonly used effects.

The IMPRESSION Pedal also includes built in Digital Decimator Noise reduction implemented to keep the effects processing quiet. The Decimator is configured with an internal pre-defined threshold of -40db below the peak input to the DSP and will provide low level downward expansion as the input signal drops below this internal set threshold. The Decimator increases the Dynamic Range of the internal effects by approximately 12db and reduces the ultimate noise floor of the Effects. This feature is not user adjustable but built in and implemented to provide enhanced performance.

- Input Impedance: 560k ohms
- Maximum Input Level: +11dbu
- Maximum Output Level: +11dbu
- Dynamic Range: 93db A weighted
- Decimator Effective Noise Reduction: 12db
- Noise Floor / Mix Level at 1/2: -90dbu
- CHORUS Modulation Time: User Set up to 5 seconds
- FLANGE Modulation Time: User Set up to 5 seconds
- Maximum DELAY Time: 800 milliseconds
- Reverb Mix: User Set from Odb to -21db
- Dimensions: (L x W x H) 7.4 x 4.7 x 1.42"
- Weight: 1.06 lbs
- Power: 9VAC External Adaptor
- Power Consumption: 200 milliamps at 9VAC

For support or warranty questions, please contact the manufacturer:
Phone: 248-673-7790

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer