Gibson ES-390 with P90s Electric Guitar (with Case)

No longer available at zZounds
With its fully hollow body construction and hot P-90 pickups, the Gibson ES-390 has a bright, clear tone with excellent resonance.

What's special about this item?

Feature: What it does:
Fully hollow body Single tone chamber, resonant and alive sound
Mahogany neck Great sustain, strength, and warm tone
P-90 pickups Bright and clear; strong mids, great lows
No-wire ABR-1 bridge Accurate replication of late '50s Gibson bridge

The Gibson ES-390 electric guitar features the full hollowbody design of the ES330. Featuring Mid 60's style Block inlays to compliment the '63 style horns make the ES-390 an incredibly tonal and playable instrument. Fitted with MHS P-90 pickups is a must have instrument for the holllowbody enthusiast that seeks maximum tone and comfort.

Features:

- 100% American made, in Memphis, TN
- Tone Pros ABR-1
- Ceramic Capacitors
- Hollow body construction similar to the ES-330
- Mid 60's style Block inlays to compliment the '63 style horns
- MHS P-90 pickups having the bridge pickup reverse polarity so they are hum-canceling when they are both on
- Neck Pickup has Alnico III magnets
- Bridge Pickup has Alnico II magnets
- Memphis Tone Circuit
- CTS Pots
- Trapeze Tailpiece and Tulip button Kluson style tuners
- Hardshell Case

- Body Type: Single Chamber, Fully Hollow
- Top: 3-ply Maple/Basswood/Maple, Hot Pressed
- Back: 3-ply Maple/Basswood/Maple, Hot Pressed
- Binding: Cream ABS
- Neck: Mahogany Neck with Maple Spline
- Truss Rod: Traditional
- Neck Joint: Mortise & Tenon
- Species: Rosewood
- Radius: 12"
- Binding: Cream
- Inlays: Pearloid Small Block
- Nut/E.O.B: 1.675" / 2.035"
- Neck Position: MHS P-90 (Memphis Historic Spec)
- Bridge Position: MHS P-90 (Memphis Historic Spec)
- Material: Corian
- Width: 1.675"
- Slots: Gibson PLEK System
- Logo: Mother of Pearl 'Gibson'
- Inlay: Mother of Pearl
- Truss Rod Cover: Legacy
- Tuners: Kluson Single Ring with Tulip Buttons
- Tuning Ratio: 15:1
- Plating: Nickel
- Bridge: Tone Pro AVR-2 Locking Bridge
- Plating: Nickel
- Tailpiece: Trapeze Style
- Plating: Aluminum - Nickel Plated
- Knobs: Black Top Hats With Silver Inserts
- Pickguard: Black Reissue with 5-ply Binding
- Pickup Mounting Rings: Black
- Strings: .010 - .046
- Strap Buttons: Aluminum End Pins
- Potentiometers: 2 Volume Controls
- 2 Tone Controls
- Capacitors: Ceramic
- Switch: Three-Way Switchcraft
- Output Jack: 1/4"
- Sealer: Nitrocellulose Lacquer
- Case: Hardshell
- Case Exterior: Brown Leatherette
- Case Interior: Charcoal Plush

For support or warranty questions, please contact the manufacturer:
Phone: 800-444-2766

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer