Furman P1800PF Power Conditioner

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Furman P1800PF Power Conditioner, Main
Furman P1800PF Power Conditioner, Rear
Furman P1800PF Power Conditioner, Top
Furman P1800PF Power Conditioner, Main Furman P1800PF Power Conditioner, Rear Furman P1800PF Power Conditioner, Top
A power reservoir system and Clear Tone technology team-up to provide your equipment with ample clean power to keep you rocking at full volume all night.

Engineered specifically for use with instrument amplifiers and other high-current equipment, the Furman P-1800 PF offers a stable, protected and filtered low impedance powered supply for maximum performance of connected electronics. Furman's exclusive Power Factor provides a 45A peak current reservoir to minimize the detrimental effects of line impedance on high-current gear such as amplifiers and powered monitors. Clear Tone Technology provides additional line noise filtration tuned for instrument amplifiers for clean and consistent tone. Plus, equipment benefits from professional-level protection thanks to Furman's exclusive SMP and EVS technologies.

Power Factor Technology

Your amp needs a lot of power to sound its best. If you're plugging into the wall, there's a good chance your amp is not going to get the current it needs when pushed. Furman's exclusive Power Factor Technology provides a 45A peak current reservoir to give your amp the headroom it needs to operate at maximum efficiency. No matter what venue or club, or how close or far away from the power panel, Furman's Power Factor Technology keeps your instrument amplifier's tone consistent and sounding it's best.

Furman P1800PF: Clear Tone Technology

Clear Tone Technology works in unison with Power Factor Technology and Linear Filtering Technology to add an additional layer of AC noise filtration specifically engineered for instrument amplifiers. Clear Tone Technology provides tuned circuits that unveil… read more instrument tone, harmonics, and clarity, resulting in a fuller sound and improved dynamic response.

Power Factor Technology

Power Factor Technology supplies 45+ amps of instantaneous reserve current, on demand, for power starved amplifiers.

Surge Protection

Furman's exclusive SMP technology provides the highest level of surge & spike protection available.

Noise Filtration

LiFT offers AC power filtering to ensure clean power for unequaled audio & video clarity.

Voltage Protection

Advanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions.

Diagnostic Lights

Protection OK, Extreme Voltage and color-coded voltage range indicators provide information on power quality and operational status of unit.

Clear Tone Technology

Clear Tone Technology provides tuned filtering circuits engineered for instrument amplifiers to provide a clean and consistent tone.

Isolated Banks

Isolated outlet banks minimize inter-component interference and noise contamination.

LED Voltmeter

Segmented LED voltmeter monitors and displays incoming line voltage.

15 AMP Rating

15 Amp rating featuring a high inrush magnetic circuit breaker for added protection.

Four Total Outlets

Four rear panel outlets. read less

- Maximum Current: 15 amps @ 124 Volts
- Line Cord: Removable black cord with NEMA 15 plug
- Operating Voltage: 90 to 139 VAC
- Over-Voltage Shutdown: 140 VAC Nominal
- Spike Protection Mode: Line to neutral, zero ground leakage
- Spike Clamping Voltage: 188 VAC peak @ 3,000 Amps
- Response Time: 1 nanosecond
- Maximum Surge Current: 6,500 Amps
- Noise Attenuation: 30 dB @ 2 kHz, 40 dB @ 10 kHz, 50 dB @ 20 kHz, 70 dB @ 100 kHz
- Dimensions: 8.125 W x 12.5 D x 5.25 in. H (206mm W x 317.5mm D x 133mm H)
- Weight: 11 lbs.
- Power Consumption: 8 watts
- Reactive Power: 460 VA

For support or warranty questions, please contact the manufacturer:
Phone: 877-486-4738
Datasheet
Manual

Reviewers gave this product an overall rating of 4.5 out of 5 stars. (2 ratings)
Submitted October 9, 2012 by Scott C in East Providence, RI

"Great tone starts with solid power"

Overall: 4.5 out of 5 stars
(see rating details)
Verified Customer zZounds has verified that this reviewer made a purchase from us.
I am a semi-professional musician gigging 3-4 times per month. Many of the places we play have serious "issues" with power and there have been occasions where I notice a major loss of tone and a feeling that the amp is "flat" or non-responsive/dynamic. In one case, the circuit that I was plugged in to, also had kitchen equipment on it, on an adjoining wall-the refrigerator turned on and my amp blew...$ 150.00 worth of tubes for an $ 100.00 gig...You don't need to be a mathematician to know that isn't good for the wallet.So, I decided to go with a proper power supply and ordered the P-1800 PF. In a word-FANTASTIC! Even at home, where I have adaquate power, I notice a difference - The amp sounds brighter (in a good way) and more dynamic. I can't wait to try it out at some of the rooms that I know have suspect power to make further observations.Everyone should gig with this!

Musical Background:

30 years; Guitar, Bass, Vocals

Musical Style:

Blues, Rock, Acoustic, etc.
2 of 2 people (100%) people found this review helpful. Did you?
Thanks for your opinion!
Rate and Review this Product
Read more reviews

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer