The Fender Princeton Reverb Amp of the 1960s, though small, light and moderately powerful, produced giant tube tone. In the '70s and beyond, it earned a rep as the quintessential studio recording amp, and original Princeton Reverb amps are highly sought after in today's vintage market as collectibles and as a wise choice for creating great tube tone in a small space.
Fender's new Princeton Recording Amp offers all of the great tone and dynamics of the original, plus several modern studio-friendly features. Its all-tube preamp, power amp and reverb circuitry is based on the classic '65 Princeton Reverb, and, with 20 watts and a 10 in. Jensen speaker, it provides spanking vintage tone and enough output for small gigs and rehearsals. The trans-impedance power attenuator lets you crank up the amp for full output tube overdrive and set the speaker volume as low as you want (even silent for headphone use)!
Other features include 2 classic onboard 'stomp box' effects (overdrive and compression), genuine tube-driven Fender spring reverb by Accutronics, headphone output, speaker emulated line output with level control and ground lift, speaker output jack (internal speaker may be disconnected for use with other 8-ohm enclosures, professional FX loop and 4-button footswitch.
Features:
All tube preamp, power amp, and Reverb circuitry based on classic 1965 Princeton Reverb amp
Trans-Impedance Power Attenuator allows players to crank up the amp for full output tube overdrive; then set the volume of the speaker as low as desired-even SILENT for headphone use! Unlike other attenuators, the lively feel and "bounce back" dynamics of the speaker are reflected back to the tube amp and the player's hands. This exclusive circuit may be completely bypassed when not needed.
2 "stomp box" effects, which can be completely disengaged from the signal path as desired: 3-knob Overdrive, based on traditional stomp box tones, and 2-knob Compressor, based on classic recording-friendly units, adds sustain
Genuine tube-driven Fender spring Reverb by Accutronics
Speaker Emulated Headphone output
Speaker Emulated XLR Line Output with Level control and Ground Lift
Speaker Output jack (internal speaker may be disconnected for use with other 8 Ohm enclosures)
Professional FX loop
4-button Footswitch included
Technical Info
Model Name: Princeton Recording Amp
Model Number: 2152000000 120V
Series: Pro Tube Series
Type: Tube Guitar Amplifier
Output: 20 watts into 8 ohms
Ohms: 8 ohms
Speakers: 1 x 10 in. Jensen C-10R, 8 ohm, 40 watt Speaker with Ceramic Magnet
Channels: One Channel
Controls:
Preamp: Volume, Treble, Bass, Reverb
Compressor: Compressor Sensitivity, Compressor Level
Overdrive: Overdrive Gain, Overdrive Tone, Overdrive Level
Trans-Impedance Power Attenuator: Full-To Silent Attenuator Control
Back Panel: Line Output Level with Ground Lift
Covering: Black Textured Vinyl with Silver Grille Cloth
Weight: 45 lbs. (21 kg)
Dimensions:
Height: 16.5 in. (42 cm)
Width: 20 in. (51 cm)
Depth: 10.75 in. (28 cm)
Tube Complement:
3 X 12AX7
1 X 12AT7
2 X 6V6
Footswitch: 4-Button Footswitch for Overdrive, Compressor, FX Loop On/Off, Reverb O/Off
Introduced: 7/2006
Notice: Product Prices, Features And Specifications Are Subject To Change Without Notice
Luscious all-tube tone for recording--no models or microchips! Trans-impedance power attenuator for power tube saturation at low or even headphone-only levels. Tube preamp with treble, bass, and volume controls. Tube-driven spring reverb. Built-in stomp-style overdrive and compression. Effects loop. Line out with level control. Two 6V6 power tubes for 15-watt output; 10" Jensen speaker. Includes 4-button footswitch.
10/30
New stock arrives at zZounds, New, order before they are gone!