Fuchs Plush Extreme Cream II Double Overdrive Pedal

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Fuchs Plush Extreme Cream II Double Overdrive Pedal, Main
Fuchs Plush Extreme Cream II Double Overdrive Pedal, Main
Featuring "warm" and "hot" channels with independent controls, this stompbox is capable of anything from mild bluesy overdrive to high-gain distortion.

The Fuchs Extreme Cream-II is like two overdrive pedals in one! It cleans up great from the guitar and stacks well with other pedals and amps. When Fuchs Audio introduced the Plush Cream, a number of players became repeat customers. When asked why, they explained that they set one for a great rhythm crunch, and the second for a screaming lead tone.

Fuchs went beyond solving that problem in the Extreme Cream. Fuchs Audio gives you two 3-knob channels. One is voiced like the stock Cream. The second is voiced warmer, all under one hood. A simple a/b switch and a simple on/off switch make operation a breeze.

In addition to the selected Integrated circuits, Fuchs Audio carefully chose each resistor and capacitor to voice the Extreme Cream to be quiet, smooth yet articulate, and dynamic. Both channels respond well to both picking strength and guitar volume, and, best of all, it feels like a tube amp and is proudly hand-crafted in Clifton, NJ, USA.

The Plush "Extreme Cream" pedal is a unique product, designed by Andy Fuchs. It uses a unique circuit topology which uses a combination of IC's and selected FET's, for lowest noise and the warmest tube like overdrive tones possible.The input impedance is 1-Meg, suitable for most any guitar or signal source. The output impedance is approximately 1-K, which is buffered, to drive long cables as well as subsequent effects.

The DC jack on the side is a standard 2.1 mm tip negative adaptor input. A Plush DC adaptor may be purchased from your local dealer or any standard Roland style (or similar) DC adaptor may be used. The output of the adaptor must be 9-Volts DC. Using this pedal with the incorrect adaptor may potentially damage the pedal, which will not be covered under warranty.

Battery replacement: To replace the battery, remove the four screws holding the rear cover in the unit. The battery should be replaced with a new premium quality 9-V alkaline battery. Battery life (depending on usage) should be approximately 6 months to one year. Battery not included.

For support or warranty questions, please contact the manufacturer:
Phone: 973-772-4420
Email: info@fuchsaudio.com
Web: https://fuchsaudiotechnology.com/contact-us/

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer