Fuchs Plush Creme De La Trem Tremolo Pedal

No longer available at zZounds
Including the subtle yet distinctive pitch modulation, dial in the warm tremolo usually found on vintage brownface combo amps with the Creme De La Trem.

The Fuchs Plush "Creme de la Trem" is a unique tremolo pedal, which is designed to emulate the sound of the highly desirable Brown face Fender Tremolo's of the 50's and 60's. These tremolos were truly unique, in that they produced not only a level variation, but also altered pitch. This is often compared to modern day chorus pedals, or rotary speakers. The "Creme de la Trem" is a unique product, designed by Andy Fuchs. It uses a unique circuit topology which uses a combination of IC's, combined with FET's to emulate the vintage Tremolo tones of the 60's Brown face Fender amps. It is designed for lowest noise and the warmest most neutral and tube like tones possible.

The unit is activated when a standard 1/4" guitar cable is plugged into the input jack. If using this unit on battery power, the guitar cable should be unplugged when it's not in use, to extend battery life.

The Plush "Creme de la Trem" is an easy to Tremolo unit. The rate knob sets the speed of the tremolo, while the intensity knob adjusts how strong the effect is. From a subtle amount of modulation, to an extreme warble, these controls will allow you to dial the exact vintage tones you seek. Not only does it provide level variation, but the subtle tonal shifts, not unlike a rotating speaker or chorus, unavailable in any other tremolo pedal. Lush, full, spacious and quiet. True hard wire bypass, battery or adaptor power.

- Dimensions: 4.625 x 3.625 x 1.25"
- Weight: 1 lb.
- Input: 1/4" jack
- Output: 1/4" jack
- Power supply: 9V battery, or 2.1 mm tip negative adapter input with 9V DC.
- Input impedance: 1Meg
- Switching: The Plush "Creme de la Trem" provides a true hard wire bypass, which means when not in use (LED not lit) the input is connected directly to the output, with no loading of the signal, and no active devices in the signal path.
- Output impedance: 1K
- Enclosure: Solid Aluminum

For support or warranty questions, please contact the manufacturer:
Phone: 973-772-4420
Email: info@fuchsaudio.com
Web: https://fuchsaudiotechnology.com/contact-us/