Event Opal Biamplified Nearfield Studio Monitor
No longer available at zZounds
With an intuitive waveguide design and tuned bass ports, the Opal delivers an absurd 750 watts of studio-quality sound through its 8" carbon fiber driver.
Overview
The Opal series monitors are a long awaited feat that combines numerous patented technologies that the people at Event have been meticulously designing and developing for years. The Opal Monitors boast a world class 2-way driver design and the EX8 driver uses a high-power neodymium motor with a 30Hz-10kHz response that blows away the competition. Incorporating their own ULD tweeter with rotatable wave guide mixes beryllium with the neodymium motor pushing powerful, high SPL sound minus the distortion that would occur in an inferior tweeter. The next level of monitoring, brought to you by Event.
Event's Opal Studio Monitors can be switched from a vertical to a horizontal position (the tweeter and logos rotate) to accommodate a variety of setup situations. All controls are concealed on the front behind a flip-open panel, and the amp is mounted on the back and designed to be low profile for better mounting flexibility. Front porting allows for more positioning flexibility - in soffits and more! The high-fidelity analog circuitry ensures the purest sound and a microphone is included for room analysis and optimum system configuration.
Features
- Variable Impedance Flared Ports (patent pending)
- Eliminates artifacts heard in rear reflection ports that rely on room acoustics
- Internal engineering removes all port noise
- Cabinet designed with complex radii to eliminate diffraction
- Complete aluminum construction provides low resonance and pure wide sound stage
- ULD Tweeter… read more with powerful neodymium motor
- Rotatable high frequency wave guide for side mounting
- 750 Watts Peak Power
- Microphone for room analysis and optimum configuration
- 8 inch EX8 Driver with 30Hz to 10kHz raw response
- Carbon fiber reinforced cone with 63mm neodymium motor
- Second dedicated voice coil
- Linearized impedance and reduced inductance
- Dramatically lowered distortion characteristics
- Increased speed and control of cone assembly
Event paid close attention to the Opal's cabinet and bass port design to deliver top quality. The Opal wears aluminum for reduced resonance and features a complex curved body to minimize the diffraction issues that arise from flat or cornered sections. It sports front-mounted variable impedance bass reflex ports that neither rely on room acoustics like rear ports do, nor suffer from air distortion artifacts like you find in conventional front-ported systems. The result is extremely fast, deep, and accurate bass.
Power
Offering 750 watts of power, stunning transient response, and general no-compromise engineering, you can expect an extended midrange, a surprisingly powerful low end, and an exceptionally precise and articulate sound with these amazing new reference monitors.
Drivers
The Opal is loaded with an EX8 driver that boasts a 30Hz to 10kHz raw response and a carbon fiber reinforced cone for big sound - all powered by a 63mm neodymium motor. The ULD tweeter sports a powerful neodymium motor that drives an edge wound aluminum coil on a beryllium dome. The tweeter can be rotated, allowing for either vertical or horizontal positioning of the monitor speaker. A second dedicated voice coil - named XCoil - is equipped for linearized impedance and reduced inductance and exhibits dramatically lowered distortion characteristics and increased speed and control of cone assembly. The end result? Amazing sound quality. read less
Event's Opal Studio Monitors can be switched from a vertical to a horizontal position (the tweeter and logos rotate) to accommodate a variety of setup situations. All controls are concealed on the front behind a flip-open panel, and the amp is mounted on the back and designed to be low profile for better mounting flexibility. Front porting allows for more positioning flexibility - in soffits and more! The high-fidelity analog circuitry ensures the purest sound and a microphone is included for room analysis and optimum system configuration.
Features
- Variable Impedance Flared Ports (patent pending)
- Eliminates artifacts heard in rear reflection ports that rely on room acoustics
- Internal engineering removes all port noise
- Cabinet designed with complex radii to eliminate diffraction
- Complete aluminum construction provides low resonance and pure wide sound stage
- ULD Tweeter… read more with powerful neodymium motor
- Rotatable high frequency wave guide for side mounting
- 750 Watts Peak Power
- Microphone for room analysis and optimum configuration
- 8 inch EX8 Driver with 30Hz to 10kHz raw response
- Carbon fiber reinforced cone with 63mm neodymium motor
- Second dedicated voice coil
- Linearized impedance and reduced inductance
- Dramatically lowered distortion characteristics
- Increased speed and control of cone assembly
Event paid close attention to the Opal's cabinet and bass port design to deliver top quality. The Opal wears aluminum for reduced resonance and features a complex curved body to minimize the diffraction issues that arise from flat or cornered sections. It sports front-mounted variable impedance bass reflex ports that neither rely on room acoustics like rear ports do, nor suffer from air distortion artifacts like you find in conventional front-ported systems. The result is extremely fast, deep, and accurate bass.
Power
Offering 750 watts of power, stunning transient response, and general no-compromise engineering, you can expect an extended midrange, a surprisingly powerful low end, and an exceptionally precise and articulate sound with these amazing new reference monitors.
Drivers
The Opal is loaded with an EX8 driver that boasts a 30Hz to 10kHz raw response and a carbon fiber reinforced cone for big sound - all powered by a 63mm neodymium motor. The ULD tweeter sports a powerful neodymium motor that drives an edge wound aluminum coil on a beryllium dome. The tweeter can be rotated, allowing for either vertical or horizontal positioning of the monitor speaker. A second dedicated voice coil - named XCoil - is equipped for linearized impedance and reduced inductance and exhibits dramatically lowered distortion characteristics and increased speed and control of cone assembly. The end result? Amazing sound quality. read less
Specs
General Specifications
Frequency Response: 35Hz-22kHz
Crossover Frequency: 1600Hz
Crossover Type: Acoustic 8th Order (48dB/Oct)
3rd Harmonic Distortion: @ 90dB SPL, 1m:
- 500 - 7kHz - 0.08%
- 200 - 20kHz - 0.2%
- <200Hz - 1.5%
Acoustic Output: SPL @ 1m
- Long Term (80Hz - 20kHz): 111dB
- Peak (80Hz - 20kHz): 114dB
Signal Input: Combo XLR-1/4 inch TRS (bal/unbal)
Input Sensitivity: 0.755 v/rms is 0dBu
AC Input Voltage:
- 110-120V or 220-240V (selectable)
- 90-110V (Japan)
AC Input Connector: 2-Pin IEC
Average Long-Term Power Consumption: 220 watts
Quiescent Power Consumption: <20 watts
EX8 Low Frequency Transducer Specifications
Piston Diameter: 180mm (7.1 inches)
Voice Coil Configuration:
- X-Coil double
- Low distortion design
Voice Coil Diameter: 66mm (2.6 inches)
X-Coil Diameter: 65.2mm (2.56 inches)
Former Material: High Strength Polyamide - Glass Fiber
Voice Coil Wire: Copper Clad Al
Magnet Type: Neodymium
Magnetic Gap Design: XBL - Split Gap
Impedance Nominal in Cabinet: 5 Ohms
Cone Type: Carbon fiber composite
Power Handling:
- Continuous Pink Noise: 240 watts
- Program Power: 360 watts
- Peak Power: 720 watts
ULD1 High Frequency Transducer Specifications
Dome Diameter: 25.4mm (1 inch)
Voice Coil Diameter: 25mm (0.98 inches)
Magnet Type: Neodymium
Impedance DCr: 6 Ohms
Impedance Nominal in Cabinet: 5 Ohms
Dome Type: Beryllium Copper
Power Handling:
- Continuous Pink Noise 25 watts (above 1.6kHz)
- Program Power 50 watts (above 1.6kHz)
- Peak Power 100 watts (above 1.6kHz)
Low Frequency Amplifier Specifications
Frequency Response: 20Hz - 20kHz (+/-0.1dB)
Operating Band Pass: 20Hz - 1,600Hz
Total Harmonic Distortion: 0.009% @ 300 watts into 5 ohm load
Voltage Gain: 24dB
Long Term Power @ 5 Ohms: 270 watts
Continuous Power @ 5 Ohms: 387 watts
Burst Power @ 5 Ohms: 600 watts
Output Topology: Class AB
Cooling: Convection - Aluminium Heat Sink
High frequency Amplifier Specifications
Frequency Response: 20Hz - 20kHz (+/-0.1dB)
Operating Band Pass: 1,600Hz - 20,000Hz
Total Harmonic Distortion: 0.003% @ 90 watts into 5 ohm load
Voltage Gain: 15dB
Long Term Power @ 5 Ohms: 50 watts
Continuous Power @ 5 Ohms: 112 watts
Burst Power @ 5 Ohms: 140 watts
Output Topology: Class AB
Cooling: Convection - Aluminium Heat Sink
Physical Specifications
Cabinet Volume: 28 Cubic Litres
Cabinet Construction: High Pressure Injection-Moulded Aluminum
Cabinet Finish: Black Powdercoat
Low Frequency Vents: Two Variable Impedance Ports
Waveguide Construction: High Pressure Injection-Moulded Aluminum
Waveguide: Elliptical waveguide - Rotatable
Mounting Points: Four each (M8 Omni-mount Pattern)
Cabinet Dimensions (WxHxD): 11.6 x 17.7 x 10.8 inches (295 x 450 x 273mm)
Cabinet Weight: 46.74 lbs (21.2kg)
Shipping Dimensions (WxHxD): 15.4 x 22.6 x 15 inches (390 x 575 x 380mm)
Shipping Weight: 53.57 lbs (24.3kg)
Operating Temperature Range: 40-95*F (5-35*C)
Frequency Response: 35Hz-22kHz
Crossover Frequency: 1600Hz
Crossover Type: Acoustic 8th Order (48dB/Oct)
3rd Harmonic Distortion: @ 90dB SPL, 1m:
- 500 - 7kHz - 0.08%
- 200 - 20kHz - 0.2%
- <200Hz - 1.5%
Acoustic Output: SPL @ 1m
- Long Term (80Hz - 20kHz): 111dB
- Peak (80Hz - 20kHz): 114dB
Signal Input: Combo XLR-1/4 inch TRS (bal/unbal)
Input Sensitivity: 0.755 v/rms is 0dBu
AC Input Voltage:
- 110-120V or 220-240V (selectable)
- 90-110V (Japan)
AC Input Connector: 2-Pin IEC
Average Long-Term Power Consumption: 220 watts
Quiescent Power Consumption: <20 watts
EX8 Low Frequency Transducer Specifications
Piston Diameter: 180mm (7.1 inches)
Voice Coil Configuration:
- X-Coil double
- Low distortion design
Voice Coil Diameter: 66mm (2.6 inches)
X-Coil Diameter: 65.2mm (2.56 inches)
Former Material: High Strength Polyamide - Glass Fiber
Voice Coil Wire: Copper Clad Al
Magnet Type: Neodymium
Magnetic Gap Design: XBL - Split Gap
Impedance Nominal in Cabinet: 5 Ohms
Cone Type: Carbon fiber composite
Power Handling:
- Continuous Pink Noise: 240 watts
- Program Power: 360 watts
- Peak Power: 720 watts
ULD1 High Frequency Transducer Specifications
Dome Diameter: 25.4mm (1 inch)
Voice Coil Diameter: 25mm (0.98 inches)
Magnet Type: Neodymium
Impedance DCr: 6 Ohms
Impedance Nominal in Cabinet: 5 Ohms
Dome Type: Beryllium Copper
Power Handling:
- Continuous Pink Noise 25 watts (above 1.6kHz)
- Program Power 50 watts (above 1.6kHz)
- Peak Power 100 watts (above 1.6kHz)
Low Frequency Amplifier Specifications
Frequency Response: 20Hz - 20kHz (+/-0.1dB)
Operating Band Pass: 20Hz - 1,600Hz
Total Harmonic Distortion: 0.009% @ 300 watts into 5 ohm load
Voltage Gain: 24dB
Long Term Power @ 5 Ohms: 270 watts
Continuous Power @ 5 Ohms: 387 watts
Burst Power @ 5 Ohms: 600 watts
Output Topology: Class AB
Cooling: Convection - Aluminium Heat Sink
High frequency Amplifier Specifications
Frequency Response: 20Hz - 20kHz (+/-0.1dB)
Operating Band Pass: 1,600Hz - 20,000Hz
Total Harmonic Distortion: 0.003% @ 90 watts into 5 ohm load
Voltage Gain: 15dB
Long Term Power @ 5 Ohms: 50 watts
Continuous Power @ 5 Ohms: 112 watts
Burst Power @ 5 Ohms: 140 watts
Output Topology: Class AB
Cooling: Convection - Aluminium Heat Sink
Physical Specifications
Cabinet Volume: 28 Cubic Litres
Cabinet Construction: High Pressure Injection-Moulded Aluminum
Cabinet Finish: Black Powdercoat
Low Frequency Vents: Two Variable Impedance Ports
Waveguide Construction: High Pressure Injection-Moulded Aluminum
Waveguide: Elliptical waveguide - Rotatable
Mounting Points: Four each (M8 Omni-mount Pattern)
Cabinet Dimensions (WxHxD): 11.6 x 17.7 x 10.8 inches (295 x 450 x 273mm)
Cabinet Weight: 46.74 lbs (21.2kg)
Shipping Dimensions (WxHxD): 15.4 x 22.6 x 15 inches (390 x 575 x 380mm)
Shipping Weight: 53.57 lbs (24.3kg)
Operating Temperature Range: 40-95*F (5-35*C)
Reviews
Reviewers gave this product an overall rating of 5 out of 5 stars.
(9 ratings)
Submitted October 20, 2010 by a customer from yahoo.com.au
"The Best Monitors on this Planet!"
Sound
I spent months researching the best monitors for me. I produce drum n bass there fore I needed monitors that could handle the low end but also deliver detailed mids and high end.
The Event Opals did that with ease. The stereo Field is super wide and the image tight and focused. The only other monitors that were in the same league was the Focal Twin 6BE but they definitely lacked the low end I needed.
The Opals are definitely the No1 monitor choice right now and this seems to be consistent across the internet. (Gearslutz and FM Mag etc).
Anyways, this is my humble opinion.
Cheers
Bill
Features
Nice options but a powerswitch at the front would have made them perfect!
Ease of Use
Plug in.
Sound awesome.
dead easy
Quality
At 22.1kg each these bad boys are the real deal.
They are beasts and are built like trucks!
Value
they dropped in price recently so are amazing value!
Manufacturer Support
To be fair I haven't dealt with support so no comment
The Wow Factor
Sexxxxxxyyyyy
Musical Background:
Music Producer
Musical Style:
drum and bass
7 of 7 people (100%) people found this review helpful. Did you?
Thanks for your opinion!
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
Universal Audio Apollo Twin X Duo Thunderbolt 3 Audio Interface
$999.00
- 12 x$83.25
- 8 x$124.88
- No Credit Check6 x$166.50
- No Credit Check4 x$249.75
Yamaha HS8S Active Studio Subwoofer
$499.99
- 8 x$62.50
- No Credit Check6 x$83.33
- No Credit Check4 x$125.00
Shure SM7B Dynamic Cardioid Studio Vocal Microphone
$399.00
- 8 x$49.88
- No Credit Check6 x$66.50
- No Credit Check4 x$99.75
Focusrite Scarlett 2i2 Gen 4 USB Audio Interface
$199.99
- No Credit Check6 x$33.33
- No Credit Check4 x$50.00
Neumann TLM 102 Studio Microphone
$749.00
- 12 x$62.42
- 8 x$93.63
- No Credit Check6 x$124.83
- No Credit Check4 x$187.25
Neumann TLM 103 Studio Microphone
$1,195.00
- 18 x
- 12 x$99.58
- 8 x$149.38
- No Credit Check6 x$199.17
- No Credit Check4 x$298.75
KRK S10.4 Powered Studio Subwoofer (160 Watts)
$479.00
- 8 x$59.88
- No Credit Check6 x$79.83
- No Credit Check4 x$119.75
JBL LSR310S Powered Studio Subwoofer Speaker
$349.00
- 8 x$43.63
- No Credit Check6 x$58.17
- No Credit Check4 x$87.25
Universal Audio Apollo Solo Thunderbolt 3 Audio Interface
$499.00
- 8 x$62.38
- No Credit Check6 x$83.17
- No Credit Check4 x$124.75