Eden WTP600 World Tour Pro Bass Amplifier Head (600 Watts)

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Eden WTP600 World Tour Pro Bass Amplifier Head (600 Watts), Main
Eden WTP600 World Tour Pro Bass Amplifier Head (600 Watts), Angle
Eden WTP600 World Tour Pro Bass Amplifier Head (600 Watts), Angle Rear
Eden WTP600 World Tour Pro Bass Amplifier Head (600 Watts), Rear
Eden WTP600 World Tour Pro Bass Amplifier Head (600 Watts), Main Eden WTP600 World Tour Pro Bass Amplifier Head (600 Watts), Angle Eden WTP600 World Tour Pro Bass Amplifier Head (600 Watts), Angle Rear Eden WTP600 World Tour Pro Bass Amplifier Head (600 Watts), Rear
The 5-stage parametric EQ, built-in compressor and tube mix controls of the Eden WTP600 let you dial in your perfect bass tone, straight from the amp.

EDEN has worked closely in conjunction with touring artists, producers and techs to provide a selection of features that not only allow detailed tone shaping but also integrate studio quality compression and tone shaping adjustments providing massive flexibility in one easy to use amplifier unit.

Eden has developed a package of highly useable and flexible outputs and controls that allow the World Tour Pro amplifiers to be used in a variety of ways without the need for outboard equipment or patch bays. Add to this illuminated combination speaker output sockets for easy rig selection and the World Tour Pro delivers possibly the most flexible and easy to use pro touring rig ever!

Features:

- Active Passive input sockets
- Mute Switch
- Interactive mute indicator LED
- Input level control
- Studio quality compressor with adjustable controls
- Tube tone circuitry with Tube mix control
- Enhance control
- 5 stage semi parametric EQ
- Master control
- 2x illuminated output sockets with selectable mode cycle control for rig set up indication.

- Model: WTP600
- Power: 600 Watts into 4 Ohms
- Amp Modes: Mono
- Frequency Response: 10Hz - 15KHz
- Speaker Connection: Speakon or 1/4"
- Weight: 29lbs. (13 Kg)
- Dimensions: (H x W x D) 3.5 x 16.1 x 14.57" (8.8 x 41 x 37cm)

For support or warranty questions, please contact the manufacturer:
Phone: 800-877-6863
Manual

Reviewers gave this product an overall rating of 5 out of 5 stars. (2 ratings)
Submitted October 8, 2015 by Charles S in St. Louis, MO

"38 years of playing and I have found my amp!!"

Overall: 5 out of 5 stars
(see rating details)
I upgraded my bass rig from a SWR SM400 and Carvin 210 cab to this head and a Eden 410XLT cabinet. All I can say is buy it if you are thinking about it. I can get any tone I want in just a matter of seconds. The amp runs cool and the eq section is very responsive. The compressor is about as good as you get even if you purchased an external one. The second tube adds a nice amount of gain and warmth. Both my Warwick fretless and Ibanez 1605E's personalities are projected and well defined. Right now I am looking at adding a nice Crown power amp only to increase the output power at large events with no PA. I think the difference with this amp and the old WT series is that the WTP 600's preamp can be feed to an external amp. What a great piece of engineering....

Musical Background:

37 years of playing. I have played professionally and I have recorded. Working on my projects in my home studio these days

Musical Style:

Blues, jazz, rock, R&B, folk and anything else that I like
16 of 16 people (100%) people found this review helpful. Did you?
Thanks for your opinion!
Rate and Review this Product
Read more reviews

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer