EBS OctaBass Octave Divider Pedal

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
EBS OctaBass Octave Divider Pedal, Main
EBS OctaBass Octave Divider Pedal, Angle
EBS OctaBass Octave Divider Pedal, Main EBS OctaBass Octave Divider Pedal, Angle
Use the OctaBass to add rich dimension to your sound by tracking your notes and triggering sub-octave tones controllable by a 3-way high, mid, low switch.

The EBS OctaBass studio edition analog octave divider creates a single note one octave below the pitch of the played note, adding dimension to your sound.

Track Your Note

The pedal recognizes two or three-note chords and trigger the lowest note. Control the level of the original tone and mix in the octave effect. Choose between High, Mid or Low Range -- which relates to the character of the sound of the sub-note.

Hints

Sub-notes are perhaps most effective when playing on the higher frets, and could add a nice touch just slightly blended into the original tone, especially on a solo on bass or guitar. The OctaBass works really good together with distortion as well, but remember to keep the OctaBass before the drive in the signal chain, so it gets as clean as possible tone to trigger. If you are after a synth-bass type of sound, a great way to achieve that is to run an OctaBass, combined with an EBS BassIQ envelope filter, and use the 'Down' mode on the IQ. That makes the impression of hitting a key on a keyboard, and adds that sub-bass as well as synth sound to the tone.

The Original EBS Effect!

The OctaBass was the very first stompbox effect from EBS. This classic effect was introduced in 1992, and based on an onboard effect featured in the legacy EBS Taurus combo. It has become 'classic' after being a trusted companion to legendary bassists like Tony Levin, Roger Glover, Marcus Miller, Tal Wilkenfeld & many, many more...

The 2008 edition improvements added 3… read more dB higher headroom, higher sensitivity and analog circuitry with higher dynamics and lower noise, as well as true bypass switching technique.

The 2015 Studio Edition comes with optimized signal path, design, signal relay switching technique, protection against over voltage use up to 18V and the possibility to power the pedal with anything from 9-12V DC.

Features:

- Preserve the low range
- Suitable for live and studio use
- Triple Mode Octave Divider
- High, Mid and Low Ranges
- Controls for Normal and Octave volume
- True Bypass Signal Relay Switching
- Protected against over voltage up to 18V
- Powered by 9 to 12V DC
- Optional (not included): EBS AD-9+ Power Supply read less

- Nominal Input Level: -8 dBv
- Input Impedance: 700 kohms
- Dry Bandwidth: +0 / -2 dB 20 - 20k Hz
- Dry Level: min / max -oo / 0 dB
- Dry Noise Level: -96 dBv
- Octaver Bandwidth: +0 / -3 dB 10 - 110 Hz
- Octaver Level Gain min / max: -oo / 12 dB min
- Octaver Filter Slope: 18 dB/oct. Low pass
- Low Pass Triggering Threshold: -70 dBv @200 Hz
- Dimensions: (L x W x H) 2.8 x 4.5 x 1.4"
- Weight: 0.88 lb
- Bypass:True Bypass
- Power Requirements: 9-12 V DC Regulated, 30 mA max

* EBS Recommend the use of the EBS AD-9+ DC adapter.
The adapter can supply up to twenty pedals at the same time.

For support or warranty questions, please contact the manufacturer:
Phone: 212-253-8138

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer