EBS Dynaverb Bass Reverb Pedal

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
EBS Dynaverb Bass Reverb Pedal, Main
EBS Dynaverb Bass Reverb Pedal, Angle
EBS Dynaverb Bass Reverb Pedal, Main EBS Dynaverb Bass Reverb Pedal, Angle
Get eight different stereo digital reverb effects in one compact pedal with three different hall, plate and room modes and multiple variation options each.

The EBS Dynaverb studio edition offer eight different true stereo digital reverb effects, from rooms, to plates, to halls. All in a compact pedal. Outstanding performance. The EBS DynaVerb Studio Edition use a 24-bit digital processing circuitry for outstanding and noiseless performance on stage and in the recording studio. It has stereo input as well as stereo out.

The Foundation

The DynaVerb feature three different Modes or types of reverb - Room, Plate and Hall. Room and Plate can run in three variations, A, B and C (explained in detail in the manual), while the Hall reverb offers two variations A, B (C same as B). It makes a total of 8 different reverbs. The controls simply set the volume for the tone (Tone), and how much of the reverb you'd like to blend in (Reverb).

Serial, or Parallel

Inside the box, you can change the pedal to run in parallel mode, if preferred in the studio.

Evolution

The DynaVerb was first introduced in 2002. From the 2008 edition improvements added 3 dB higher headroom and new analog circuitry with higher dynamics and lower noise, as well as true bypass switching technique. 2015 introduce a complete new design of the pedals looks, and adding a new signal relay type switch for secure and silent action, protection against overvoltage use up to 18V, possibilities to power the pedal with anything from 9-12V DC and an optimized signal path for studio quality sound.

Not Just For the Bass Player

The EBS DynaVerb Studio Edition is… read more highly recommended to use with bass and keyboard. The Stereo in and out adds to the usability and the excellent sound quality is comparable to any studio rack unit. EBS now also offer a DynaVerb Guitar Edition, with a different tail suited especially for use with guitar.

It is strongly recommended to use the DynaVerb with a 9V DC power adaptor, such as the EBS AD-9+. Consider battery use only as a backup solution. Battery not included.

Features:

- Preserve the low range
- Suitable for live and studio use
- High Dynamics Stereo Reverb
- Hall, Plate and Room types
- Three different effects per type
- Controls for Reverb and Tone
- 24-bit digital processing circuitry
- Stereo/Mono
- Serial/parallel (internal switch)
- True Bypass Signal Relay Switching
- Protected against over voltage up to 18V
- Powered by 9 to 12V DC
- Optional (not included): EBS AD-9+ Power Supply read less

- Nominal Input Level: - 8 dBv
- Input Impedance: 1 Mohms stereo 500 kohms mono
- Dry Bandwidth: +0 / -3 dB 20 - 20k Hz
- Reverb Bandwidth: +0/-3 dB 20 - 20k Hz
- Tone: Low Pass Filter min / max 1 / 20 kHz
- Reverb Types: 3 Rooms, 3 Plates and 2 Halls
- Sampling Frequency: 48 kHz
- Dynamic Range: 107 dB A-weighted
- Dimensions: (L x W x H) 2.8 x 4.5 x 1.4", (70 x 115 x 35 mm)
- Weight: 400g (0.88 lb.)
- Bypass: True Bypass
- Power Requirements: 9-12 V DC Regulated, 100 mA max.

For support or warranty questions, please contact the manufacturer:
Phone: 212-253-8138

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer