Dynaudio BM9S II Active Studio Subwoofer

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Dynaudio BM9S II Active Studio Subwoofer, Main
Dynaudio BM9S II Active Studio Subwoofer, Angle
Dynaudio BM9S II Active Studio Subwoofer, Rear
Dynaudio BM9S II Active Studio Subwoofer, Main Dynaudio BM9S II Active Studio Subwoofer, Angle Dynaudio BM9S II Active Studio Subwoofer, Rear
Bring home accurate bass monitoring with the Dynaudio BM9S II active studio sub. Powered by 200 watts, this 10" subwoofer fills in the low end of your mixes.

The Dynaudio tradition continues in the II-series subs, delivering Dynaudio's premium, professional sound quality and performance. Dynaudio Professional II-series precision subwoofers are made in Denmark using hand-crafted drivers that have made Dynaudio the industry standard in studios the world over.

The Dynaudio BM9S II is specifically designed to complement BM Compact mkIII and BM5 mkIII monitors, adding extended bass in smaller mixing and recording environments.

Features:

- 10" woofer with pure aluminum voice coil. 200W @ 4 ohm
- Phase adjustment in 0* / 180*; Auto on/off, power LED;
- Selectable LFE or slave mode
- Discrete LFE input, slave output for linking
- Adjustment of low-pass corner frequencies (50-150 hz)
- Frequency response of 29 Hz to 250 hz
- SAT/SUB high-pass adjustment: Flat, 60 Hz, 80 H

- Model: BM9S II
- System: Precision Subwoofer
- Frequency Response: 29 Hz to 250 Hz
- Inputs: LFE/Slave, SAT/SUB, XLR right/left full bandwidth
- XLR Input impedance: + branch 20 kOhm, - branch 10 kOhm
- Sensitivity: 75 mVRMS to 5 VRMS, adjustable
- Max. Input voltage: 10 VRMS
- Outputs: Slave, SAT/SUB, XLR right/left, High-pass filtered
- XLR Output impedance: 100 Ohm (each branch)
- XLR Pin-out: 1: 0 / 2: + / 3: -
- Mode selector: LFE, Slave (Phase and volume controls are bypassed in slave mode
- SAT High-pass: Flat, 60 Hz, 80 Hz
- SUB Low-pass: 50 Hz to 150 Hz
- Auto ON/OFF: Automatic ON (LED green) when signal is detected at input Automatic mute (LED red) when no signal is detected for 15 to 20 min.
- Amplifier power: 200 W, 4 Ohm
- Power consumption: <16 W Standby, 325 W Max.
- Woofer: 240 mm/10" One piece molded MSP cone (Magnesium Silicate Polymer), 100 mm/4", Pure aluminum voice coil
- Weight: 8.8 kg. / 19.4 lbs
- Dimensions: (W x H x L) 290 x 290 x 300 mm / 11.4 x 11.4 x 11.8"

For support or warranty questions, please contact the manufacturer:
Manual

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer