dbx 131S 31-Band Graphic EQ
Remarkably simple to operate, the dbx 131S is a fully-featured graphic EQ with one channel, 31 1/3rd octave bands, switchable boost/cut ranges and more.
Overview
The dbx 131S Graphic Equalizer series has been designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls.
The dbx 131S not only offers standard features like single-channel, 31, 1/3 octave bands, ISO frequency centers, +/- 12 dB input gain range, and switchable 50Hz/12 dB per octave low-cut filter, but also includes other insightful features. These features include 20 mm faders; selectable +/-6dB or +/-12dB boost/cut range for precise gain adjustments; XLR, and 1/4 inch TRS connectors for installation ease; balanced inputs and outputs for quiet operation. The visionary design of the dbx 131 makes your job easier.
- Switchable boost/cut ranges of +/-6 or +/-12 dB
- 12dB per octave, 3dB down @ 50Hz low-cut filter
- Front panel bypass switch
- +/-12 dB input gain range
- 4-segment LED ladders for monitoring output levels
- XLR and TRS Inputs and Outputs
- Internal Toroidal Transformer
- Frequency Response of <10 Hz to >50kHz
- Dynamic range of greater than 108dB
The dbx 131S not only offers standard features like single-channel, 31, 1/3 octave bands, ISO frequency centers, +/- 12 dB input gain range, and switchable 50Hz/12 dB per octave low-cut filter, but also includes other insightful features. These features include 20 mm faders; selectable +/-6dB or +/-12dB boost/cut range for precise gain adjustments; XLR, and 1/4 inch TRS connectors for installation ease; balanced inputs and outputs for quiet operation. The visionary design of the dbx 131 makes your job easier.
Features
- Single 31-band, 1/3-octave Constant Q frequency bands- Switchable boost/cut ranges of +/-6 or +/-12 dB
- 12dB per octave, 3dB down @ 50Hz low-cut filter
- Front panel bypass switch
- +/-12 dB input gain range
- 4-segment LED ladders for monitoring output levels
- XLR and TRS Inputs and Outputs
- Internal Toroidal Transformer
- Frequency Response of <10 Hz to >50kHz
- Dynamic range of greater than 108dB
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
Specs
Inputs
- Connectors: 1/4 inch TRS, female XLR (pin 2 hot)
- Type: Electronically balanced/unbalanced, RF filtered
- Impedance: Balanced 40k ohm, unbalanced 20k ohm
- Max Input Level: >+21dBu balanced or unbalanced
- CMRR: >40dB, typically >55dB at 1kHz
Outputs
- Connectors: 1/4 inch TRS, male XLR (pin 2 hot)
- Type: Impedance-balanced/unbalanced, RF filtered
- Impedance: Balanced 100 ohm, unbalanced 50 ohm
- Max Output Level: >+21dBu balanced/unbalanced into 2k ohm or greater
- >+18dBm balanced/unbalanced (into 600 ohm)
System Performance
- Bandwidth: 20Hz to 20kHz, +0.5/-1dB
- Frequency Response: <10Hz to >50kHz, +0.5/-3dB
- Dynamic Range: 108dB
- Signal-to-Noise: 90dB
- THD+Noise: <0.004%
- nterchannel Crosstalk: <-80dB, 20Hz to 20kHz
Function Switches
- EQ Bypass: Bypasses the graphic equalizer section in the signal path
- Low Cut: Activates the 50Hz 12dB/octave high-pass filter
- Range: Selects either +/- 6dB or +/- 12dB slider boost/cut range
Power Supply
- Operating Voltage: 100VAC 50/60Hz, 120VAC 60Hz, 230VAC 50/60Hz
- Power Consumption: 12W
- Mains Connection: IEC receptacle
Note: Specifications subject to change without notice.
- Connectors: 1/4 inch TRS, female XLR (pin 2 hot)
- Type: Electronically balanced/unbalanced, RF filtered
- Impedance: Balanced 40k ohm, unbalanced 20k ohm
- Max Input Level: >+21dBu balanced or unbalanced
- CMRR: >40dB, typically >55dB at 1kHz
Outputs
- Connectors: 1/4 inch TRS, male XLR (pin 2 hot)
- Type: Impedance-balanced/unbalanced, RF filtered
- Impedance: Balanced 100 ohm, unbalanced 50 ohm
- Max Output Level: >+21dBu balanced/unbalanced into 2k ohm or greater
- >+18dBm balanced/unbalanced (into 600 ohm)
System Performance
- Bandwidth: 20Hz to 20kHz, +0.5/-1dB
- Frequency Response: <10Hz to >50kHz, +0.5/-3dB
- Dynamic Range: 108dB
- Signal-to-Noise: 90dB
- THD+Noise: <0.004%
- nterchannel Crosstalk: <-80dB, 20Hz to 20kHz
Function Switches
- EQ Bypass: Bypasses the graphic equalizer section in the signal path
- Low Cut: Activates the 50Hz 12dB/octave high-pass filter
- Range: Selects either +/- 6dB or +/- 12dB slider boost/cut range
Power Supply
- Operating Voltage: 100VAC 50/60Hz, 120VAC 60Hz, 230VAC 50/60Hz
- Power Consumption: 12W
- Mains Connection: IEC receptacle
Note: Specifications subject to change without notice.
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 6 lbs
- Shipping Dimensions: 22 x 12 x 3 in
- Manufacturer Part Number (MPN): dbx131S
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 844-776-4899
Web: https://www.dbxpro.com/en/support
Phone: 844-776-4899
Web: https://www.dbxpro.com/en/support
New
$239.00
This is a carousel with product cards. Use the previous and next buttons to navigate.
Related Accessories
This is a carousel with product cards. Use the previous and next buttons to navigate.
Related Accessories
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
Native Instruments Maschine Plus Production Workstation
$1,199.00
- 18 x
- 12 x$99.92
- 8 x$149.88
- No Credit Check6 x$199.83
- No Credit Check4 x$299.75
Hosa Pro-Conex Stage Box Snake (12 XLR x 4 TRS)
$291.95
- No Credit Check6 x$48.66
- No Credit Check4 x$72.99
Black Lion Audio PBR TRS-BT 46-Point Bluetooth TRS Patchbay
$249.00
- No Credit Check6 x$41.50
- No Credit Check4 x$62.25
Black Lion Audio PG-X Power Conditioner
$119.00
- No Credit Check6 x$19.83
- No Credit Check4 x$29.75
Rode PSA1 Plus Swivel-Mount Studio Arm Microphone Stand
$129.00
- No Credit Check6 x$21.50
- No Credit Check4 x$32.25
This is a carousel with product cards. Use the previous and next buttons to navigate.
