Crown XLI2500 Power Amplifier (750 Watts)

The 750-watt Crown XLI2500 is an affordable solution to your small venue needs with RCA and balanced XLR inputs, a clip indicator, and stereo level controls.

Crown has done it again, designing a high-quality power amp for use in the real world, all at an incredible price. The Crown XLI2500 power amplifier represents a leap in affordable, quality power amplification. The XLI2500 has the power, reliable performance, and ease of use to be used by musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.

The Crown XLI2500 power amp has all the connections you need in order to get hooked up, including RCA and XLR inputs plus Speakon and binding post outputs. Other features include user selectable input sensitivity of 0.755V or 1.4V, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.

With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series. They are a powerful example of quality and value.

Features:

- Stereo/parallel/bridge-mono mode
- User selectable input sensitivity - 0.775V and 1.4V
- Efficient forced-air cooling prevents excessive thermal buildup
- Electronically balanced RCA and XLR inputs; binding post and Speakon outputs
- Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
- Protection against shorts, no-load, on/off thumps and radio-frequency interference
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.

- Power Output:
- - 4 Ohms Stereo: 750 watts per channel
- - 8 Ohms Stereo: 500 watts per channel
- - 8 Ohms Bridge Mono: 1,500 watts
- Channels: 2
- Sensitivity (full rated power at 8 ohms): 0.775V or 1.4V
- Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted): > 100 dB
- Total Harmonic Distortion (THD) (20Hz - 20kHz): < 0.5-percent
- Inter Modulation Distortion (60Hz and 7kHz at 4:1 from full rated output to -40 dB): = / < 0.35 percent
- Frequency Response (at 1W, 20Hz - 20kHz): 0 dB, -1 dB
- Crosstalk (below rated power):
- - at 1kHz: -75 dB
- - at 20kHz: - 59 dB
- Damping Factor (from 10Hz to 400Hz, 8 ohms): > 200
- Dimensions (HxWxD): 3.5 x 19 x 12.4 inches
- Weight: 29.7 lbs
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 33 lbs
Shipping Dimensions: 22 x 21 x 6 in
Manufacturer Part Number (MPN): NXLI2500-0-US

For support or warranty questions, please contact the manufacturer:
Phone: 800-342-6939

Reviewers gave this product an overall rating of 5 out of 5 stars. (5 ratings)
Submitted May 11, 2021 by a customer from yahoo.com

"crown amps"

Overall: 5 out of 5 stars
(see rating details)
Verified Customer zZounds has verified that this reviewer made a purchase from us.
If you are looking for a good performing amp then buy a Crown amp. And you will not have to buy another amp. and if you don't get a Crown amp then you will be buying another amp soon Crown is the only way to go for the money
Sound
crown never everI don't care what you go get crown is one of the best amp you con buy and I have 5 of them I have 3 crown xli 3500 1 crown 2500 and 1 crown 800 and I have more then enough power for all my speakers I've tried other speaker in the past But let me down they just keep on push they never give up and they take your speraker to a hold new level you can do what you want to But I stand by crown all the way
9 of 9 people (100%) people found this review helpful. Did you?
Thanks for your opinion!

New

$569.00
  • 8 x  
    $71.13
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to