Conquest Custom OPIA Hi-Definition Instrument Cable

No longer available at zZounds
What makes Conquest OPIA cables "high-definition"? With four conductors instead of the usual two, these instrument cables reject hum, interference and noise.

The Conquest Custom OPIA Hi-Definition Instrument Cable features a Conquest design 4 conductor, full coverage braid shielded wire and Switchcraft #280 1/4" male plug and #226 1/4" right angle male plug. The Optima wire is designed for maximum low frequency EMI noise rejection. The 4 conductors form a "double hum bucking" system that reduces noise induction providing crystal clear highs, tight bottom end and full spectrum audio clarity.

The Conquest Sound Custom Shop was created to bring to market the finest high definition audio wiring products we could develop. These lines of custom shop instrument cables put to rest the image that high definition cables need to be over hyped and expensive.

- Genuine Switchcraft #280 1/4" Male Plug.
- Genuine Switchcraft #226 1/4" Right Angle Male Plug.
- 4 conductors. With each conductor being 24 gauge with a stranding of 41x40 in each conductor.
- Each conductor is .995% pure
- When the conductors are combined, the effective (actual) gauge becomes 18 and the actual conductor strand count is 41/164.
- When the conductors are combined the effective copper o.d. becomes .044
- The shield coverage is 95% of tight angle tinned .995% pure copper
- Conductor resistance is 6.39 ohms per 1000 ft.
- The shield resistance is 3.958 ohms per 1000 ft.
- Capacitance is 29 pf/ft

For support or warranty questions, please contact the manufacturer:
Phone: 708-534-0390

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer