Behringer PMP2000 10-Channel Powered Mixer (800 Watts)

No longer available at zZounds
Craft live mixes with 9 mic inputs, dual 9-band graphic EQs, and built-in effects. This PA head pushes 2 x 350 watts in stereo, dual mono or bridged mono.

Pack up your mixer and go! The Behringer PMP2000 powered mixer puts 800 Watts of power output, 9 high-quality mic preamps, Behringer's 24-bit stereo FX processor, and more in a slim chassis weighing just 30 pounds. Since the 10-channel PMP2000 is both mixer and power amp, it's a streamlined solution for mid-sized gigs.

What's Your Channel Count?

The mixer section provides 9 XLR microphone preamps -- the last 3 of which double as stereo channels -- plus separate CD/Tape inputs. Musical-sounding 3-band EQ, are available on all 9 mic channels, and the first 6 mono channels have switchable -25 dB pads and clip LEDs. The PMP2000 provides global switchable +48V phantom power for condenser microphones.

High-Performance Power Amps

Thanks to efficient Class-D technology with "near-zero" thermal buildup, the PMP2000 can run cool in even the most challenging audio environments, without using large, heavy heat sinks or toroid transformers to dissipate heat. No extra parts means no extra weight -- this Behringer model weighs in at a little over 30 pounds, which isn't bad at all when it comes to live performance gear.

Push the PMP2000 power amps to the max and still get the big, punchy sound your music deserves. You can bridge the amps in the PMP2000 for 1,600 Watts of power output, or use two 800-Watt outputs for stereo or dual mono operation. This makes the PMP2000 ideal for running mono mains plus a separate monitor mix.

Built-In Effects

Make standout mixes with a read more hundred 24-bit stereo effects available on the PMP2000. With 100 presets onboard, you have a large selection of reverb, echo, chorus, delay, pitch shifters, multi-effects, and other tools to choose from to sweeten your live sound. For flexibility, you can apply the effects to your main outs as well as your monitor mixes.

The dual 9-band graphic EQs make it easy to sculpt your sound and cut back on feedback. Apply these graphic EQ curves to left and right stereo channels, or run one for your mono mains and the other for your monitor mix.

Features:

- 10-Channel, 2 x 350-Watt stereo powered mixer (800 Watt bridged mode)
- Low Noise ULN design, high headroom, and transparent audio
- Class-D technology yields an efficient, lightweight design
- 10-Channel mixer section features 6 mono and 3 stereo channels plus separate CD/Tape inputs
- 24-Bit stereo FX processor with 100 presets including reverb, chorus, flanger, delay, pitch shifter, and various multi-effects
- 9 IMP (Invisible Mic Preamps) with switchable +48V phantom power for condenser microphones
- Musical 3-band EQ, switchable pad, and Clip LEDs on all mono channels
- Dual 9-band graphic EQ allows precise frequency correction of monitor and main outputs
- Selectable stereo (main L/R) or double mono (main/monitor) amplifier operation mode
- Multifunctional stereo preamp outputs and stereo power amp inputs for added flexibility
- Ruggedly constructed to handle years of use
- Compact, lightweight (30.9 pounds) design

Ideal for small- to mid-sized venues, Behringer's PMP2000 is an all-in-one mixer and power amp solution. You supply the music and the PMP2000 will supply the power.
read less

Microphone Inputs
- Type: XLR, electronically balanced, discrete input circuit
- Frequency Response: <10 Hz-100 kHz (-1 dB), <10Hz- >200 kHz (-3 dB)
- Gain: +33 dB, +8 dB with pad
- Max Input Level: +12 dBu @ +12 dB gain
- Impedance: approx. 2.2 k ohms balanced/ 1.1 k ohms unbalanced
- Signal-to-Noise Ratio: 110 dB/ 114 dB A-weighted (-11 dBu IN @ +33 dB gain)

Distortion (THD+N): 0.001% / 0.008% A-weighted

Mono Line Inputs:
- Type: 1/4 inch TRS connectors, balanced
- Impedance: approx 80k ohms balanced, 40k ohms unbalanced
- Max Input Level: 30 dBu

Stereo Line Inputs
- Type: 1/4 inch TRS connectors, unbalanced
- Impedance: approx. 40k ohms unbalanced
- Max Input Level: +28 dBu

Equalizer:
- Low: 60 Hz / +/- 15 dB
- Mid: 700 Hz-8kHz/ +/- 15 dB
- High: 6 kHz / +/- 15 dB

Preamp Outputs left/mono & right:
- Type: 1/4 inch TRS connector, unbalanced
- Impedance: approx 1.5k ohms
- Max Output Level: +21 dBu

Monitor Output:
- Type: 1/4 inch TRS connectors, unbalanced
- Impedance: 1.5k ohms
- Max Output Level: +21 dBu

Power Amp Inputs:
- Type: 1/4 inch TRS connectors, unbalanced
- Impedance: approx 47k ohms
- Max Input Level: +21 dBu

Loudspeaker Outputs
- Type: Professional speaker connectors (compatible to Neutrik Speakon)

Load Impedance:
- Left/monitor: 4/8/16 ohms
- Right/mono main: 4/8/16 ohms
- Bridge: 8-16 ohms

DSP:
- Converter: 24-bit Texas Instruments, 24-bit Sigma-Delta, 64/128-times oversampling
- Sampling Rate: 40 kHz

Amplifier (Power Amp Output):
- Power @ 4 ohms: 350 w
- Power @ 8 ohms: 165 w
- Power @ 8 ohms (Bridge): 800 w

Power Supply:
- Mains Voltage: 120 V~, 60 Hz
- Power Consumption: max 1 kW
- Fuse: T 10 A H 250V
- Mains Connector: Standard IEC receptacle

Physical/Weight:
- Dimensions: approx. 11 x 18 1/8 x 10 5/8 inches
- Weight: 30.9 lbs

Output at 8 ohms stereo: 165 watts per channel

For support or warranty questions, please contact the manufacturer:
Web: https://www.behringer.com/service.html

Behringer PMP2000 Powered Mixer

The PMP2000 powered mixer delivers more power, better sound at less weight!

The PMP2000 mixer delivers 800 Watts of massive power and incredible performance through next-generation amplifier technology, crystal-clear sound plus an ultra-compact and lightweight design. The 24-bit stereo FX processor, IMP mic preamps and more round off this impressive package of power features.

Get massive power and great sound in a lightweight package!

Features

- Ultra-compact 2 x 350-Watt stereo powered mixer (800 Watt bridged mode)
- Ultra-Low Noise ULN design, high headroom and ultra-transparent audio
- 10-channel mixer section features 6 mono and 3 stereo channels plus separate CD/Tape inputs
- Studio-grade 24-bit stereo FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
- 9 high-quality IMP "Invisible" Mic Preamps with switchable +48 V phantom power for condenser microphones
- Effective, extremely musical 3-band EQ, switchable Pad and Clip LEDs on all mono channels
- Dual 9-band graphic EQ allows precise frequency correction of monitor and main outputs
- Selectable stereo (main L/R) or double mono (main/monitor) amplifier operation mode
- Multi-functional stereo Preamp outputs and stereo Power amp inputs for added flexibility
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany

Reviewers gave this product an overall rating of 4.5 out of 5 stars. (44 ratings)
Submitted December 5, 2011 by a customer from hotmail.com

"Worth the price & puts out plenty of power"

Overall: 4.5 out of 5 stars
(see rating details)
Verified Customer zZounds has verified that this reviewer made a purchase from us.
at least a few years until i get a bigger set up
Sound
For the price it is excellent. I am running 2 PV115s with it and I barely turn it up and it bangs!! If you're on a budget then buy this. It has a little hum when you first turn it on but when you turn up your music then you never notice it. I recommend buying this with some Peavey PV115's. I did a show last week and that set up BANGED!
Features
Lots of effects but I mainly needed power for the bass. I play hip-hop
Ease of Use
Easy easy easy!
Quality
I've been rough with this set up and it still works great!
Value
Worth the price
Manufacturer Support
Never dealt with company
The Wow Factor
Good appeal

Musical Background:

13 years

Musical Style:

Hip-Hop
18 of 18 people (100%) people found this review helpful. Did you?
Thanks for your opinion!

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer