Behringer EPX2800 Europower Power Amplifier (2800 Watts)
No longer available at zZounds
Power your passive PA for less! A serious value, Behringer's ultra-efficient EPX2800 power amplifier delivers 440 peak watts per channel into 8 ohms.
Overview
The Behringer Europower EPX2800 power amplifier offers the power of Accelerated Transient Response (ATR) technology into an exceptionally lightweight package that was built to last through all the rigors of the road. In fact, the Europower EPX2800 power amp weighs in at 22.3 lbs (10.1 kg), so you can practically lift it with just one finger! With ample power and high-tech efficiency combination, the Europower EPX2800 power amp is a supercharged workhorse that will keep your rig kicking for years to come.
- 2 x 1400 Watts into 2 Ohms; 2 x 800 Watts into 4 Ohms; 2800 Watts into 4 Ohms (bridge mode)
- Ultra-light, ultra-low noise and ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
- Switchable limiters offer maximum output level with reliable overload protection
- Detented gain controls for precise setting and matching of sensitivity
- Precise Power, Signal and Limit LEDs to monitor performance
- XLR, inch TRS and RCA input connectors for compatibility with any source
- Professional speaker connectors and touch-proof binding posts support most speaker wiring systems
- Built-in Subwoofer/Satellite crossover for more flexibility
- Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
-… read more Back-to-front ventilation system including air filter for reliable operation
- Built-like-a-tank, impact-resistant, all-steel 2U rack-mount chassis
- High-quality components and exceptionally rugged construction ensure long life
Features:
- 2800-Watt Lightweight Stereo Power Amplifier with ATR (Accelerated Transient Response) Technology for ultimate punch and clarity- 2 x 1400 Watts into 2 Ohms; 2 x 800 Watts into 4 Ohms; 2800 Watts into 4 Ohms (bridge mode)
- Ultra-light, ultra-low noise and ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
- Switchable limiters offer maximum output level with reliable overload protection
- Detented gain controls for precise setting and matching of sensitivity
- Precise Power, Signal and Limit LEDs to monitor performance
- XLR, inch TRS and RCA input connectors for compatibility with any source
- Professional speaker connectors and touch-proof binding posts support most speaker wiring systems
- Built-in Subwoofer/Satellite crossover for more flexibility
- Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
-… read more Back-to-front ventilation system including air filter for reliable operation
- Built-like-a-tank, impact-resistant, all-steel 2U rack-mount chassis
- High-quality components and exceptionally rugged construction ensure long life
Ultra-light, Built on a Legacy
The Behringer Europower EPX2800 Power Amp is created with groundbreaking switch-mode technology that eliminates the heavy transformer! Best of all, the Behringer Europower EPX2800 power amp also offers a clip limiter allowing you to get even more out of the amplifier without overdriving it or your speaker system. This built-in technology automatically senses when the amp is being overdriven into "clipping" and momentarily reduces the input level to avoid clipping distortion, making this a perfect amp for the hard rocking DJ. Super-reliable and provides even tighter bass performance than previous power amps because Europower EPX2800 delivers ultra-high peak currents on demand.Panel Discussion
The Behringer Europower EPX2800 power amp inputs are flexible, accepting balanced XLR, inch TRS, unbalanced inch TS, and RCA connections. Take your pick of professional locking speaker outputs or touch-proof binding posts to securely connect speakers.Built-In Crossover
The rear panel also contains a switch that allows you to put these amps to work in mono, stereo (two-channel mode) or bridge mode, which is always mono. A built-in crossover switch lets you put the amp into bi-amp mode, which sends low-frequency content ( read lessSpecs
Output Power:
- RMS Power:
-- 8 O per channel, stereo: 350 W
-- 4 O per channel, stereo: 600 W
-- 2 O per channel, stereo: 990 W
- Bridged Mono:
-- 8 O bridge mode: 1220 W
-- 4 O bridge mode: 2000 W
- PEAK POWER:
-- 8 O per channel, stereo: 440 W
-- 4 O per channel, stereo: 800 W
-- 2 O per channel, stereo: 1400 W
- Bridged Mono:
-- 8 O bridge mode: 1620 W
-- 4 O bridge mode: 2800 W
- Input Sensitivity: 1 V
- Distortion: <0.01%
- Frequency Response: 20 Hz - 20 kHz, +0/-1 dB
- Voltage Gain: 35 dB
- Damping Factor: > 300 @ 8 Ohms
- Input impedance: 10 kOhms unbalanced, 20 kOhms balanced
- Signal-to-Noise: > 100 dBA
Controls:
- Front: POWER switch, GAIN control (channel 1 and 2)
- Rear: MODE switch, X-over Switch, BRIDGE MODE switch
Indicators:
-- Power: Blue LEDs
-- CLIP (per channel): Blue LEDs
-- PROT (per channel): Blue LEDs
-- SIGNAL (per channel): -20dB~-10dB White LEDs
-- SIGNAL (per channel): -10dB~ 0dB White LEDs
Connectors:
-- Inputs: Balanced XLR, 1/4" TRS , RCA
- Outputs: Speakon and touch-proof binding posts
Circuit protection:
- Cooling:Continuously variable speed fan, back to front air low
- Amplifier protection: Full short circuit, open circuit, thermal, ultrasonic, RF protection. Stable into reactive or mismatched loads
- Output circuit type: Class H
POWER SUPPLY / VOLTAGE (FUSES):
- USA / Canada: 120 V~, 60 Hz (T 20 A H 250 V)
- UK / Australia: 240 V~, 50 Hz (T 10A H 250 V)
- Europe: 230 V~, 50 Hz (T 10 A H 250 V)
- Japan: 100 V~, 50-60 Hz (T 20 A H 250 V)
- Power consumption: 3000 W
- Mains connector: Standard IEC receptacle
- Dimensions (H x W x D): 3.5 x 19.0 x 14.7", (88 x 483 x 373 mm)
- Weight: 22.3 lbs., 10.1 kg
- RMS Power:
-- 8 O per channel, stereo: 350 W
-- 4 O per channel, stereo: 600 W
-- 2 O per channel, stereo: 990 W
- Bridged Mono:
-- 8 O bridge mode: 1220 W
-- 4 O bridge mode: 2000 W
- PEAK POWER:
-- 8 O per channel, stereo: 440 W
-- 4 O per channel, stereo: 800 W
-- 2 O per channel, stereo: 1400 W
- Bridged Mono:
-- 8 O bridge mode: 1620 W
-- 4 O bridge mode: 2800 W
- Input Sensitivity: 1 V
- Distortion: <0.01%
- Frequency Response: 20 Hz - 20 kHz, +0/-1 dB
- Voltage Gain: 35 dB
- Damping Factor: > 300 @ 8 Ohms
- Input impedance: 10 kOhms unbalanced, 20 kOhms balanced
- Signal-to-Noise: > 100 dBA
Controls:
- Front: POWER switch, GAIN control (channel 1 and 2)
- Rear: MODE switch, X-over Switch, BRIDGE MODE switch
Indicators:
-- Power: Blue LEDs
-- CLIP (per channel): Blue LEDs
-- PROT (per channel): Blue LEDs
-- SIGNAL (per channel): -20dB~-10dB White LEDs
-- SIGNAL (per channel): -10dB~ 0dB White LEDs
Connectors:
-- Inputs: Balanced XLR, 1/4" TRS , RCA
- Outputs: Speakon and touch-proof binding posts
Circuit protection:
- Cooling:Continuously variable speed fan, back to front air low
- Amplifier protection: Full short circuit, open circuit, thermal, ultrasonic, RF protection. Stable into reactive or mismatched loads
- Output circuit type: Class H
POWER SUPPLY / VOLTAGE (FUSES):
- USA / Canada: 120 V~, 60 Hz (T 20 A H 250 V)
- UK / Australia: 240 V~, 50 Hz (T 10A H 250 V)
- Europe: 230 V~, 50 Hz (T 10 A H 250 V)
- Japan: 100 V~, 50-60 Hz (T 20 A H 250 V)
- Power consumption: 3000 W
- Mains connector: Standard IEC receptacle
- Dimensions (H x W x D): 3.5 x 19.0 x 14.7", (88 x 483 x 373 mm)
- Weight: 22.3 lbs., 10.1 kg
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Web: https://www.behringer.com/service.html
Web: https://www.behringer.com/service.html
Reviews
Reviewers gave this product an overall rating of 5 out of 5 stars.
(1 ratings)
Submitted November 21, 2012 by Catalino R in Bradenton, FL
"Built to last."
Verified Customer
zZounds has verified that this reviewer made a purchase from us.
I just recieved it 4 hours ago and I am very impressed at the overall appearance and quality of the epx2800. This amplifer is built like a tank. I am using it in bridge mode to power a Peavy 51" Lowrider house in a home made 7 s.f. vented enclosure tuned to app. 30hz. It brings the 800 watt pink r.m.s. subwoofer to life and that at 70 percent volume with out breaking a sweat. I have the automatic limiter switch on to keep it from clipping but I don't think i need it on. The amp is not working at near 100% capability and the hose shakes. The selling price is definitely lower than the overall value of this prduct and best of all; it is easy to use. My maines are powered by a QSC GX7 and this combo is absolutely a winner. I can't wait for my next gig!
Musical Background:
I am a classical guitarist, a crooner and a dj/kj during weekends.
Musical Style:
Salsa
Reggaeton
Club/dance/techno
Jazz
Bachata
Merengue
Pop latino
HipHop
9 of 15 people (60%) people found this review helpful. Did you?
Thanks for your opinion!
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
JBL JRX225 2-Way Passive, Unpowered PA Speaker
$609.00
- 12 x$50.75
- 8 x$76.13
- No Credit Check6 x$101.50
- No Credit Check4 x$152.25
JBL JRX218S Passive, Unpowered Compact Subwoofer Speaker
$639.00
- 12 x$53.25
- 8 x$79.88
- No Credit Check6 x$106.50
- No Credit Check4 x$159.75
Peavey PV215 Passive Unpowered PA Enclosure (2x15")
$399.99
- 8 x$50.00
- No Credit Check6 x$66.66
- No Credit Check4 x$100.00
Crown XLS2502 DriveCore 2 Power Amplifier (2400 Watts)
$809.00
- 12 x$67.42
- 8 x$101.13
- No Credit Check6 x$134.83
- No Credit Check4 x$202.25
Shure BLX288/PG58 Dual-Channel Handheld Wireless PG58 Microphone System
$549.00
- 8 x$68.63
- No Credit Check6 x$91.50
- No Credit Check4 x$137.25
JBL SRX812 Passive, Unpowered Loudspeaker
$1,219.00
- 18 x$67.72
- 12 x$101.58
- 8 x$152.38
- No Credit Check6 x$203.17
- No Credit Check4 x$304.75
Peavey PV15M Passive Unpowered Floor Monitor (500 Watts, 1x15")
$329.99
- 8 x$41.25
- No Credit Check6 x$55.00
- No Credit Check4 x$82.50
JBL JRX215 2-Way PA Passive, Unpowered Loudspeaker
$389.00
- 8 x$48.63
- No Credit Check6 x$64.83
- No Credit Check4 x$97.25
Peavey SP4 II Quasi-3-Way Passive, Unpowered PA Speaker (2000 Watts, 2x15")
$899.99
- 12 x$75.00
- 8 x$112.50
- No Credit Check6 x$150.00
- No Credit Check4 x$225.00
Peavey PV 12M Passive Unpowered Floor Monitor (500 Watts, 1x12")
$299.99
- 8 x$37.50
- No Credit Check6 x$50.00
- No Credit Check4 x$75.00