Behringer EPQ304 Europower Power Amplifier (300 Watts)

No longer available at zZounds
Treat the audience to a tighter, more natural sound with the EPQ304 power amp from Behringer. Includes accelerated transient response technology.

The Behringer EPQ304 Europower Power Amplifier takes huge pulses of energy (current and voltage) to propel a woofer cone out fast enough to match a bass beat. That's called Transient Response and it's the holy grail of amp designers. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of the circuitry, the amps are able to react instantly to even the most demanding electronic bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.

Instead of operating relatively continuously like most power amps, the Behringer EPQ series of power amps feature rail tracking for effectively modulating the power supply rails with only the peaks of the input signal. This technology has revolutionized pro audio amp designs with its outstanding performance and efficiency. When combined with switching-mode power supplies that do away with heavy toroid transformers, Behringer's designs provide more dynamic punch and, because they are so much more efficient, run cooler and don't require huge, heavy heat sinks.

BEHRINGER didn't invent this technology, but their R&D Department has been working for years to perfect their own version, creating lightweight amps that run cool and also achieve their goal of Accelerated Transient Response.

Everything You Need

The simple front panel controls of these amps give you all of your sound's vital signs at a glance. After pressing the Power read more Button, the POWER LED will light when the amp is ready for action. Both channels have independent gain dials as well as clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also SIGNAL LEDs that light up when a signal is present at the input.

On the back panels of the EPQ2000 and EPQ1200, the INPUTs accept balanced XLR, 1/4-inch TRS, and unbalanced 1/4-inch TS and RCA connections. Professional locking speaker outputs to securely connect speakers. The same panel contains the switches that allow you to put these amps to work in either mono, stereo (two channel mode) or mono bridge mode. A built-in CROSSOVER switch allow you to send low frequency content to subwoofers and other sound reinforcement speakers (CH1100 Hz or FULL RANGE). Flick the LIMITER ON/OFF switch to activate the built-in overload protection, or turn it off if you're feeling lucky.

The back panels of the Behringer EPQ304, EPQ450 and EPQ900 accept balanced XLR. The Behringer EPQ450 and EPQ900 have MONO On/Off and BRIDGE On/Off switches. The EPQ304 has an MONO On/Off switch for INPUTS 1 AND 2, and another MONO On/Off switch for INPUTs 3 and 4.

Value

BEHRINGER's EPQ power amps are built for the working musician. They are exceptionally light, they pack massive power and they are built to last through all the rigors of the road. Plus its light price tag will leave you with enough cash left over to acquire more stuff to amplify! Check out the EPQ series and find out why BEHRINGER power amps are among the most popular on Earth.

Features:

- 4 x 75 Watts into 4 Ohms; 4 x 50 Watts into 8 Ohms
- ATR (Accelerated Transient Response) technology for ultimate punch and clarity
- Ultra-light, ultra-low noise and ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
- Independent limiters for each channel offer maximum output level with reliable overload protection
- Detented gain controls for precise setting and matching of sensitivity
- Precise Power, Signal and Clip LEDs to monitor performance
- Servo-balanced XLR and 1/4" TRS inputs plus professional speaker connectors
- Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
- "Back-to-front" ventilation system including air filter for reliable operation
read less

For support or warranty questions, please contact the manufacturer:
Web: https://www.behringer.com/service.html

Behringer EPQ304 Europower Power Amp

The Behringer EPQ304 Europower Power Amplifier takes huge pulses of energy (current and voltage) to propel a woofer cone out fast enough to match a bass beat. That's called Transient Response and it's the holy grail of amp designers. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of the circuitry, the amps are able to react instantly to even the most demanding electronic bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.

Instead of operating relatively continuously like most power amps, the Behringer EPQ series of power amps feature rail tracking for effectively modulating the power supply rails with only the peaks of the input signal. This technology has revolutionized pro audio amp designs with its outstanding performance and efficiency. When combined with switching-mode power supplies that do away with heavy toroid transformers, Behringer's designs provide more dynamic punch and, because they are so much more efficient, run cooler and don't require huge, heavy heat sinks.

BEHRINGER didn't invent this technology, but their R&D Department has been working for years to perfect their own version, creating lightweight amps that run cool and also achieve their goal of Accelerated Transient Response.

Everything You Need

The simple front panel controls of these amps give you all of your sound's vital signs at a glance. After pressing the Power Button, the POWER LED will light when the amp is ready for action. Both channels have independent gain dials as well as clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also SIGNAL LEDs that light up when a signal is present at the input.

On the back panels of the EPQ2000 and EPQ1200, the INPUTs accept balanced XLR, 1/4-inch TRS, and unbalanced 1/4-inch TS and RCA connections. Professional locking speaker outputs to securely connect speakers. The same panel contains the switches that allow you to put these amps to work in either mono, stereo (two channel mode) or mono bridge mode. A built-in CROSSOVER switch allow you to send low frequency content to subwoofers and other sound reinforcement speakers (CH1<100 Hz / CH2>100 Hz or FULL RANGE). Flick the LIMITER ON/OFF switch to activate the built-in overload protection, or turn it off if you're feeling lucky.

The back panels of the Behringer EPQ304, EPQ450 and EPQ900 accept balanced XLR. The Behringer EPQ450 and EPQ900 have MONO On/Off and BRIDGE On/Off switches. The EPQ304 has an MONO On/Off switch for INPUTS 1 AND 2, and another MONO On/Off switch for INPUTs 3 and 4.

Value

BEHRINGER's EPQ power amps are built for the working musician. They are exceptionally light, they pack massive power and they are built to last through all the rigors of the road. Plus its light price tag will leave you with enough cash left over to acquire more stuff to amplify! Check out the EPQ series and find out why BEHRINGER power amps are among the most popular on Earth.

Features:

- 4 x 75 Watts into 4 Ohms; 4 x 50 Watts into 8 Ohms
- ATR (Accelerated Transient Response) technology for ultimate punch and clarity
- Ultra-light, ultra-low noise and ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
- Independent limiters for each channel offer maximum output level with reliable overload protection
- Detented gain controls for precise setting and matching of sensitivity
- Precise Power, Signal and Clip LEDs to monitor performance
- Servo-balanced XLR and 1/4" TRS inputs plus professional speaker connectors
- Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
- "Back-to-front" ventilation system including air filter for reliable operation

Reviewers gave this product an overall rating of 4.5 out of 5 stars. (4 ratings)
Submitted April 25, 2019 by dbrack online in town, WV

"must have for any band's tool box"

Overall: 4.5 out of 5 stars
(see rating details)
Verified Customer zZounds has verified that this reviewer made a purchase from us.
exceeded my expectation on all categories. we had couple passive peavey speakers and couple yamaha using as monitors. we were daisy chaining the 3 peavey and then the 2 yamahas. worked but little flexibility. we now use the Behringer EPQ304 with the 4 monitors speakers. We have them as AUX 1 2 3 4 using the Behringer XR18. the sound is crisp and clear. The speakers are better than I thought because we just did not have the right power source. we now have the right source. we have always been able to get loud as we need on stage with the monitors. the options for output stereo mono bridge are all usable at different venues and needs. simple it is a valuable piece of equipment.... The cooling fan is slightly noisy but has no affect on use or sound.

Musical Background:

weekend warrior

Musical Style:

classic rock
2 of 2 people (100%) people found this review helpful. Did you?
Thanks for your opinion!

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer