The Behringer B615D is a super-powerful 2-way 1500-watt active loudspeaker that delivers epic sound as a front-of-house main, or as a powerful personal monitor. With bigger and better speakers than the popular Behringer B215D and B212D systems, and way more room-shaking power, the B615D delivers an even greater sonic experience than its younger siblings.
Cool Running with Hot Output
The Behringer B615Ds employ a Class-D amplifier design for cooler-running, more efficient power usage than an AB system. Their active electronics deliver a sound that remains clear and undistorted even at maximum volume -- very useful when you're dealing with 1500 watts! They're also relatively light for their wattage, at just over 55 pounds a piece, and are highly durable.
Standard Ins and Outs
The Behringer B615D has a single 1/4-inch input and a single XLR female input, to connect with your mixer or any other balanced source. A balanced male XLR Link Output jack allows you to connect other monitors in series. A pad knob gives you more relative force when you need it, and lets you pull back when you don't. The B615D's Ultra-Low Noise (ULN) Mic/Line input has its own dedicated 2-band EQ (bass/treble).
The 15-inch long-excursion woofer cone and 1.75-inch aluminum-diaphragm compression driver are proprietary Behringer designs, built specifically for the B615D. They are built from scratch along with the rest of the componentry. Even the voice coils, backplates, and cone paper are manufactured in-house, creating a speaker that shines across its whole dynamic range. Its reproduction of sound is crystal-clear, and shines best when you use the 2-band EQ to fine tune the way your B615Ds sound in different spaces, both indoors and outdoors.
With A Mind of Its Own
The B615D has an integrated built-in active high-pass filter that helps cut down on distortion that can damage speakers when you're pumping out extreme volumes. Its active electronics also ensure that the contours of your midrange frequencies stay smooth and balanced against the sparkling highs and punchy bass that the B615D delivers.
- 1500-Watt 2-way powered speaker
- Notably lightweight system at 55 pounds
- 1 x 15-inch long-excursion LF driver
- 1 x 1.75-inch titanium-diaphragm compression HF driver
- Class-D amplifier design
- Internal switch-mode power supply
- Distinctly low power consumption
- Ultra-wide dispersion, large-format exponential horn
- Ultra-low noise Mic/Line input with Volume control
- 2-band Bass/Treble EQ
- 1 x XLR Line output for speaker chaining
- Trapezoidal cabinets for onstage floor monitor use
- Built-in 35mm pole socket
- Ergonomically designed handles
- Rugged and durable
zZounds is an authorized dealer of
Thanks to Behringer's revolutionary Class-D amplifier technology and internal switch-mode power supplies, EUROLIVE D Series loudspeakers provide a much better power-to-weight ratio than competing active speakers. Put simply, you get all the power of traditional bi-amped active loudspeakers without all the backbreaking weight. And the sound quality of these lightweight loudspeakers exceeds that of their extremely popular EUROLIVE B215D and B212D systems, plus we've given them even more output power and a significant transducer upgrade.
Due to their high-efficiency design, EUROLIVE B615D and B612D active loudspeakers crank out 1500 of the cleanest, punchiest audio Watts they've ever packed into a compact loudspeaker system. The integrated sound processor provides total system control for dependable protection of the LF/HF transducers, and thanks to the built-in active high-pass filter, you can run them full out without the slightest hint of distortion. In addition, both models feature an Ultra-Low Noise (ULN) Mic/Line input with Level control and dedicated 2-band EQ (bass/treble) for easy control.
Intelligent by Design
One of the coolest things about active loudspeakers is the lack of back-breaking racks of amps, crossovers and EQs that are often required to make passive speaker systems sound almost as good. But that comes with a trade-off--that extra weight is transferred to the loudspeaker, making it difficult for a single user to heave all that mass onto the top of a speaker stand. Behringer EUROLIVE D Series' "Intelligent-Design" merges the best features of active loudspeakers with significantly lower weight through the use of switch-mode power supplies (SMPS) and Class-D amplifier topology.
Class-D Amplifier Technology Delivers High Power With Low Weight
Instead of operating relatively continuously like Class-AB circuits, Class-D amps switch on and off thousands of times per second, delivering power only as it is needed. In other words, the amplifier is either fully on or fully off, which significantly reduces the power losses in the output devices. Although we didn't invent Class-D technology, their R&D Department has spent years perfecting their own version with all the benefits of reduced weight and cool running--and none of the drawbacks.
Massive Power to Size Ratio
At the heart of each B615D and B612D are two high-current amplifiers with a combined maximum output of 1500 Watts. These Class-D amps are capable of driving the speakers to their maximum without damage or distortion thanks to their internal active protection circuits. Put simply, these systems will astound you with their massive punch, smooth midrange and articulate top-end.
Let's face it; the transducers (woofers and tweeters) are the only part of a sound system you actually hear, so they never cut any corners here. While some of their competitors are content to buy off-the-shelf transducers and plug them into their boxes, they custom-design and build theirs from scratch. They wind the voice coils, process the paper pulp into cones--and even machine their own back plates. This enables us to control the quality, and frankly to make better components, like the long-excursion 12 and 15" LF transducers and state-of-the-art 1.75" titanium-diaphragm compression drivers they load into each and every B612D/B615D.
Instant PA System
With just a single EUROLIVE D Series loudspeaker and a microphone you can set up an instant sound system. Thanks to the built-in preamp section, you just connect a dynamic mic and raise and lower the volume with the Level control. Place the speaker on a tabletop or stand, and power up. It's just that easy. And if you need more coverage, say for a larger room or audience, you can add more active loudspeakers via the convenient Link Output XLR connector.
Stereo Music System
You can even use two D Series enclosures for stereo playback of your music sound files without any additional hardware. Just plug the appropriate stereo "breakout" adapter into your deck's output jack and run the cables to the 1/4" inputs on each loudspeaker. Set the Level and EQ controls the same on both enclosures. Voila, instant party!
Marvelous as Monitors
Thanks to their trapezoidal design, these cabinets can be laid on their side providing the ideal angle for onstage monitor wedge applications. Hookup is simple, requiring only a single XLR or 1/4" cable from the monitor send on your mixing console and power. Additional monitors can be chained together via the XLR Link Output jack on the rear panel.
Powerful Low Frequency Response
The EUROLIVE D Series was built with extended low frequency handling in mind. Thanks to their internally braced, injection-molded, tuned-port enclosures, these bad boys really crank out serious quantities of bass. Keep in mind that bass response varies according to LF transducer size, so the larger the speaker, the more bass you will be able to generate.
Articulate Midrange and Treble
Even if your particular application doesn't include booming bass, you'll love the sheer accuracy of these loudspeakers. Over a year went into designing an exponential horn/titanium-diaphragm compression driver combination that could handle serious hard rock or dance music--yet also satisfy audiophiles with its musical timbre and attention to detail. For spoken word, singing or acoustical instruments, the EUROLIVE D Series is unmatched for its ability to articulate complex harmonic content. In fact, many customers say these are the most natural-sounding speakers they've ever heard, even when compared to systems costing much more.
Processor Controlled Output
Hidden deep inside each enclosure is the equivalent of an active 2-way electronic crossover, graphic EQ, parametric EQ, mic preamp, limiter and two Class-D power amplifiers, yet overall weight is less than comparable loudspeaker systems. These components work together seamlessly to provide optimal sound quality without you ever having to touch a single knob. As output demands rise, the internal processor frees up LF amp and transducer resources by reducing program bass content, so that higher overall system volume can be realized. It's like having a tiny soundman inside each cabinet constantly monitoring and changing output parameters for the best possible sound.
Which Speaker Should I Buy?
Well, let's start with your application... are you giving a speech in a hotel ballroom--or rocking out at the local bar or dance club? Whether to choose one speaker cabinet over another depends on your bass requirements. A 15" woofer has about 40% more surface area with which to move air than a 12" and that translates into more bass. So if you're addressing a meeting, or jamming at the local blues joint, the B612D might be all you'll ever need. But if you're providing disco in a busy nightclub, hosting Karaoke night in your living room, or just want a little more "thump", then the B615D may be a better choice.
EUROLIVE active PA loudspeakers stand head and shoulders above the rest of the pack and deliver exceptional performance, even when pushed to their limits. Lightweight and powerful, with built-in mixers, 2 band EQ and custom-designed transducers, B612D and B615D active loudspeakers are ideal for both speech and music applications--at a price unheard of in this class.
- High-power 1500-Watt 2-way PA sound reinforcement speaker system for live and playback applications
- Ultra-compact and light weight system delivers excellent sound even at extreme sound pressure levels
- Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
- Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption
- Integrated sound processor for ultimate system control and speaker protection
- Extremely powerful 15" long-excursion driver provides incredibly deep bass and acoustic power
- State-of-the-art 1.75" titanium-diaphragm compression driver for exceptional high-frequency reproduction
- Ultra-wide dispersion, large-format exponential horn
- Ultra-low noise Mic/Line input with Volume control and Clip LED
- Dedicated 2-band EQ for perfect sound adjustment
- Additional Line output allows linking of additional speaker systems
- Versatile trapezoidal enclosure design allows different positioning: - Stand mounting with 35-mm pole socket - Tilts on its side for use as a floor monitor
- Ergonomically shaped handles for easy carrying and setup
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany