Product Description
The AN16o provides sixteen balanced mic- or line-level analog outputs, with switchable output levels per channel pair. Audio outputs feature secure DB25 multipin connectors. With both mic- and line-level outputs available, connecting to a console is simpler and more flexible.
The AN16o can be used both on stage and at front of house to provide outputs to consoles, as well as to amplifiers and speaker processors. Adding a split for recording or broadcast is as quick as running a Cat-5e cable to the additional locations and connecting additional AN16o modules as needed. Any number of AN16o Output Modules can be connected in a system, providing unlimited lossless digital splitting of an audio stream.
The built-in A-Net Expansion jack also allows easy integration into an existing Pro16 Monitor Mixing System, as well as a path for building 32-channel systems (16x16 or 32x0) on a single Cat-5e cable. The AN16o is also fully compatible with the AN16SBR System Bridge, which supports 64-channel systems in a variety of bi-directional configurations. All network connections on the AN16o use heavy duty locking Neutrik EtherCon connectors.
Features
Sixteen balanced audio outputs with DB25 multipin connectors
A-Net In, A-Net Out, and A-Net Expansion network connections
Two-position output level switch per channel pair (mic level or line level)
Signal and Clip LEDs
Heavy duty locking Neutrik EtherCon connectors
zZounds is an authorized dealer of
Aviom products.
Audio Outputs: 16 channels, balanced, switchable mic- or line-level
Outputs: DB25 multipin connectors (2); Tascam(R) audio pinout
Impedance: Balanced output
D/A Conversion: 48kHz sample rate, 24 bit
Frequency Response: 4Hz-22kHz
A-Net Output: One Category 5 (RJ45 connector)
A-Net Expansion: One Category 5 (RJ45 connector)
Gain Settings: Four-position switch, -10dBv, 0dBu, +4dBu and +22dBu
Channel LED Indicators: Signal Present and Clip, per channel
Line Inputs: Impedance: 48k ohms
Metering:
- LEDs; green: Signal Present; red: Clip; per channel
Peak Output Levels: +4dBu, -17dBu
Maximum Output Level: +4dBu
Output Impedance: 430 ohms
Freq. Response: 4Hz-22kHz +0.2dB/-3dB
THD +N: < 0.003%
Crosstalk: -90dB
Bit Error Rate (BER): 10(-12)
Signal to Noise (unweighted): 90dB typical, A/D to D/A Measured from AN-16/i to AN-16/o Output Module
Digital Connections: A-Net In: 1; A-Net Out: 1; A-Net Expansion: 1; Neutrik EtherCon connectors
A-Net Pro16: A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable uses unshielded Cat-5e UTP (or better) cable
Latency: <0.880 msec (measured from analog input to analog output)
Power Supply: External, DC, universal switching type
- Input Voltage: 100-240 volts, 50/60Hz, 30VA
- Output Voltage: 18-24 VDC, 0.5 amp
- Plug Size: 2 mm
Power: 18-24 VDC, 500mA
Dimensions (WxDxH): 19 in. (482.6 mm) x 5.75 in. (146 mm); 1U high
Weight: 6.8 lbs. (3.08 kilo)
Options: AN-16SB System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable