Product Description
The AN16i provides 16 balanced line-level inputs into a Pro16 system. Audio is converted to digital and transmitted via A-Net, up to 500ft/150m over Cat-5e. A dedicated audio thru is available for each input channel, allowing the AN16i to be seamlessly inserted into an existing audio signal path.
Placed at a front-of-house or monitor console, the AN16i can be used as a head-end for a Pro16 Monitor Mixing System. Audio from the console—any combination of channel inserts, direct outs, submixes, auxes, or groups—is connected to the input channels on the AN16i. The A-Net Out on the AN16i is connected to the A-Net In of a Pro16 Personal Mixer or A-Net Distributor.
Used in conjunction with the AN16o Output Module, the AN16i can also be used in a digital snake as an input path for main return signals from front-of- house. The built-in A-Net Expansion jack allows two 16-channel A-Net streams to be combined onto a single cable (32x0 or 16x16), and the AN16SBR System Bridge can be used to combine up to four 16-channel streams onto a single cable in a variety of bidirectional configurations.
The flexibility and simplicity of the Pro16 Series allows complex audio distribution systems and snakes to be created quickly and cost-effectively.
Features
Sixteen balanced audio inputs (TRS connectors)
Sixteen balanced Thru connectors (TRS)
A-Net Out and A-Net Expansion network connections (RJ45)
Stereo Link switches for each channel pair
Four-position gain switches (+22, +4, 0, -10dB)
Signal present and clip LEDs per channel
zZounds is an authorized dealer of
Aviom products.
Audio Inputs: 16, balanced line-level, 1/4-inch TRS connector
Inputs - Tip: Audio +; Ring: Audio -; Sleeve: Ground
TRS Thru: Impedance matched output
Analog to Digital Conversion: 48kHz sample rate, 24 bit
Frequency Response: 4Hz-22kHz
A- Net Output: One Category 5 (RJ45 connector)
A-Net Expansion: One Category 5 (RJ45 connector)
Gain Settings: Four-position switch, -10dBv, 0dBu, +4dBu, and +22dBu
Channel LED Indicators: Signal Present and Clip, per channel
Line Inputs: Impedance: 48k ohms
Metering: LEDs; green: Signal Present, red: Clip; per channel
Stereo Operation: Stereo Link, per channel pair;
Two-position switch: (Normal, Link)
Maximum Input Level: +22dBu
Input Impedance: 17.8k ohm
Freq. Response: 4Hz-22kHz +0.2dB/-3dB
THD +N: < 0.003%
Crosstalk: -90dB
Bit Error Rate (BER): 10(-12)
Signal to Noise (unweighted): 90dB typical, A/D to D/A Measured from AN-16/i to AN-16/o Output Module
Digital Outputs: A-Net: 1; A-Net Expansion: 1; RJ45 connector
A-Net Pro16: A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable; use unshielded Cat-5e UTP (or better) cab
Latency: <0.880 msec (measured from analog input to analog output)
Power Supply: External, DC, universal switching type
- Input Voltage: 100-240 volts, 50/60Hz, 30VA
- Output Voltage: 18-24 VDC, 0.5 amp
- Plug Size: 2 mm
Power: 18-24 VDC, 500mA
Dimensions (WxDxH): 19 in. (482.6 mm) x 5.75 in. (146 mm); 1U high
Weight: 6.8 lbs. (3.08 kilo)
Options: AN-16SBR System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable